Instruments

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: > 1 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: > 1 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.

Kombinēta sprūdatslēga

>Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers).
>Has a standard open end profile and 12-point box end working profile.
>Ratchet mechanism of the box end profile with 72 teeth provides minimum working stroke of the wrench 5 °.
>Heat treated to hardness 39-41 HRC.
>Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Kombinēta sprūdatslēga

>Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers).
>Has a standard open end profile and 12-point box end working profile.
>Ratchet mechanism of the box end profile with 72 teeth provides minimum working stroke of the wrench 5 °.
>Heat treated to hardness 39-41 HRC.
>Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Combination ratchet wrench

Stock: 0 pcs.

Sastiprināšanas bļoda metāla magnēta

Stock: 0 pcs.

Portable lamp

Stock: > 1 pcs.

Uzgaļu komplekts

KEY WRENCH SET 40 PCS
Manufactured by cold stamping.
Sets are complete with adapter socket from ½ to hex 10mm.
Hex: L=30 - Н4,Н5,Н6,Н7,Н8,Н10,Н12 , L=75 mm Н4, Н5, Н6, Н7, Н8, Н10, Н12.
Тогх®: L=30 mm:Т20, Т25, ТЗО, Т40, Т45, Т50, Т55 L=75 mm. - Т20, Т25, ТЗО, Т40, Т45, Т50, Т55.
SPLINE: L=30 mm - М5,М6,М8,М10,М12, L=75 mm — М5,М6,М8,М10,М12.
Material — tool steel S2.
Coating - phosphatizing.
Packaging - plastic case.

Stock: 0 pcs.

Drive socket

Stock: 0 pcs.

Riepu pumpēšanas pistole

PRESSURE GAUGE 10 ATM WITH HOSE
Membrane-type pressure gage with scale in psi and bar.
It is used to display and test the pressure of non-aggressive and not crystallising fluids (liquids, gases).
It can be used for tire pressure monitoring.
It is protected against mechanic damage with rubber cover.
The range of measured pressure from 0.05 to 12 MPa.
Accuracy class — 5,0.
Body diametr — 65 mm.

Stock: 0 pcs.

Gaisa pūšamā pistole

BLOW OFF GUN
It is used for removing dirt from units and mechanical device by compressed air flow.
It is eqquiped with quick connector.

Stock: 0 pcs.

Eļļotājs

OIL CAN 300ML METAL (FLEXIBLE END)
Used for oiling friction units with liquid lubricants which do not require supply under pressure.
Equipped with spout.

Stock: > 1 pcs.