Lighting and lamps

Order by:
 
 
Product Code Price Number
Electrical wires

Accessories for connecting LED lamps.
8250-12V-SW
Rated voltage [V]: 12
The ideal solution for installing Utility series work lamps. Includes a 12 V relay, a 10 A fuse, a battery connector at one end, a 4 m flexible cable and a switch that can be installed in the cab.

Stock: 0 pcs.

LAZER 8250-12VSW

Price: 48.00 €

Slēdzis

The switch with the control indicator of 12 volts.

Stock: > 1 pcs.

0810682

Price: 10.00 €

Slēdzis

The switch with the control indicator of 12 volts.

Stock: > 1 pcs.

0810652

Price: 10.00 €

Lazer lukturu aizsargs

Made from high-tech impact-resistant and washable neoprene, the new Lazer Lamps universal LED covers are available in 5 different lamp sizes. Protected by high-strength Velcro pads, the covers are easy to install and remove.
Optimally designed covers optimized for the Triple-R series, but potentially suitable for any kind of LED light barriers, also have the advantage of significantly reducing the wind noise that may come from some of the larger lamps when installed above the windshield.

Stock: > 1 pcs.

LAZER-NEO4

Price: 48.00 €

Electrical wires

The ideal solution for wiring a pair of Triple-R 750, 850, 1000 and 1250 (with Position Light) lamps. The setup is quick, easy, and reliable with TE Superseal connections and no configuration procedures.


Lazer harness kits feature a 12V relay, 25A fuse, and battery terminal at one end. We use a pair of Scotch Lock connectors to facilitate the integration into your vehicle's electrical system, while ensuring that the connection remains fully protected.


All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring in to your vehicle system.

Stock: > 1 pcs.

LAZER 8231-12VSP

Price: 58.00 €

Electrical wires

The ideal solution for wiring two Lazer ST, Linear and Triple-R Lamps (ECE approved models only) on a sports bar/roof bar. The setup is quick, easy, and reliable with TE Superseal connections and no configuration procedures. The kit features a 12V relay, 30A fuse, and battery terminal at one end, and allows for the operation of two lamps via an on/off switch which can be mounted inside your vehicles cockpit.
All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring in to your vehicle system.

Stock: > 1 pcs.

LAZER 8225-12VSW

Price: 48.00 €

Electrical wires

The ideal solution for wiring your Lazer ST, Linear or Triple-R lamps (ECE approved models only). The setup is quick, easy, and reliable with TE Superseal connections and no configuration procedures. The kit features a 12V relay, 20A fuse, and battery terminal at one end, and allows for the operation of specific lamps via an on/off switch which can be mounted inside your vehicles cockpit.
All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring in to your vehicle system.

Stock: > 1 pcs.

LAZER 8226-12VSW

Price: 48.00 €

Lazer gaismas kliedētājs

The amber lenses for the Triple-R range of lights alters the standard 5000 kelvin colour temperature to ‘selective yellow’. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
Come supplied with 4x spring clips

Stock: > 1 pcs.

LAZER-R900K-15H-YLW

Price: 22.00 €

Trailer lights

Red clearance lamp with an angle holder and a reflector.
Type:
bulb marking lamp
Light source:
filament lamp, yellow, white, red
Input current:
12/ 24V
Application:
front end marking lamp
front clearance marker lamp
retro reflector
rear end marking lamp
rear clearance marker lamp
sidemarking lamp
Lamp functions:
marking / clearance light
retro reflector

Stock: > 1 pcs.

FT-001CI

Price: 4.50 €

Gabarīta lukturis

Stock: 0 pcs.

Sorry
Image not available

FT-001

Price: 10.00 €

LED gabarīta lukturis

LED clearance lamp 12-36V, white with self-adhesive tape and 0,5 m wire.
1-functional LED lamp – low power consumption

- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection
- lamp is equipped with 2x075 mm2 wire, 0,5m lenght.
- the vertical and horizontal assembly is possible by means of double-sided tape or/and two screws.

The FT-195 LED lamp video

Lamp functions:
- position front light (FT-195 B LED)
- postion rear light (FT-195 C LED)
- positon side light (FT-195 Z LED)
- application: trailers, semi-trailers, special vehicles and others

Lamp parameters:
Universal supply voltage: 12-36V DC
Operating temperature: –40°C do +55°C
Lamp is resistant to any weather conditions
Lamp is fully airthight

Power consumption:
- 12V/24V = 0,08A/0,08A (FT-195 B LED)
- 12V/24V = 0,025A/0,025A (FT-195 C LED)
- 12V/24V = 0,05A/0,05A (FT-195 Z LED)

Power consumption (rated power):
- 12V/24V = 1W/2W (FT-195 B LED)
- 12V/24V = 0,3W/0,6W (FT-195 C LED)
- 12V/24V = 0,6W/1,2W (FT-195 Z LED)

Stock: > 1 pcs.

FT-195B-LED

Price: 11.00 €

LED gabarīta lukturis

LED clearance lamp 12-36V, yellow with self-adhesive tape and 0,5 m wire.
1-functional LED lamp – low power consumption

- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection
- lamp is equipped with 2x075 mm2 wire, 0,5m lenght.
- the vertical and horizontal assembly is possible by means of double-sided tape or/and two screws.

The FT-195 LED lamp video

Lamp functions:
- position front light (FT-195 B LED)
- postion rear light (FT-195 C LED)
- positon side light (FT-195 Z LED)
- application: trailers, semi-trailers, special vehicles and others

Lamp parameters:
Universal supply voltage: 12-36V DC
Operating temperature: –40°C do +55°C
Lamp is resistant to any weather conditions
Lamp is fully airthight

Power consumption:
- 12V/24V = 0,08A/0,08A (FT-195 B LED)
- 12V/24V = 0,025A/0,025A (FT-195 C LED)
- 12V/24V = 0,05A/0,05A (FT-195 Z LED)

Power consumption (rated power):
- 12V/24V = 1W/2W (FT-195 B LED)
- 12V/24V = 0,3W/0,6W (FT-195 C LED)
- 12V/24V = 0,6W/1,2W (FT-195 Z LED)

Stock: > 1 pcs.

FT-195Z-LED

Price: 11.00 €

LED gabarīta lukturis

LED clearance lamp 12-36V, white with reflector and 0,5 m wire. The lamp meets ADR requirements.
2-functional LED clearance lamp – low power consumption
- european E9 homologation
- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection
The lamp meets ADR requirements.

The FT-070 LED lamp video

The unique lamp construction solution which increases air-tightness and the light and electronic components resistance to any external conditions.
The revolutionary system of assembly – there are no visible signs of joining bodywork with lamp surface.
The lamp is available in two versions and presents a revolutionary light emission system which goes along with an innovative design. This combination procures that with the highest probability our lamp is the most recognizable and eye-catching product on the market.


Lamp functions:
rear clearance light with reflector
front clearance light with reflector
side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
12V/24V=0,08A/0,08A

Power consumption / Rated power:
12V/24V = 1,0W/2,0W

Stock: > 1 pcs.

FT-070B-LED

Price: 6.00 €

LED gabarīta lukturis

LED clearance lamp 12-36V, red with reflector and 0,5 m wire. The lamp meets ADR requirements.
2-functional LED clearance lamp – low power consumption
- european E9 homologation
- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection
The lamp meets ADR requirements.

The FT-070 LED lamp video

The unique lamp construction solution which increases air-tightness and the light and electronic components resistance to any external conditions.
The revolutionary system of assembly – there are no visible signs of joining bodywork with lamp surface.
The lamp is available in two versions and presents a revolutionary light emission system which goes along with an innovative design. This combination procures that with the highest probability our lamp is the most recognizable and eye-catching product on the market.


Lamp functions:
rear clearance light with reflector
front clearance light with reflector
side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
12V/24V=0,08A/0,08A

Power consumption / Rated power:
12V/24V = 1,0W/2,0W

Stock: > 1 pcs.

FT-070C-LED

Price: 6.00 €

LED gabarīta lukturis

LED clearance lamp 12-36V, yellow with reflector and 0,5 m wire. The lamp meets ADR requirements.
2-functional LED clearance lamp – low power consumption
- european E9 homologation
- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection
The lamp meets ADR requirements.

The FT-070 LED lamp video

The unique lamp construction solution which increases air-tightness and the light and electronic components resistance to any external conditions.
The revolutionary system of assembly – there are no visible signs of joining bodywork with lamp surface.
The lamp is available in two versions and presents a revolutionary light emission system which goes along with an innovative design. This combination procures that with the highest probability our lamp is the most recognizable and eye-catching product on the market.


Lamp functions:
rear clearance light with reflector
front clearance light with reflector
side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
12V/24V=0,08A/0,08A

Power consumption / Rated power:
12V/24V = 1,0W/2,0W

Stock: > 1 pcs.

FT-070Z-LED

Price: 6.00 €

LED gabarīta lukturis

White LED clearance lamp 12-30V, left with reflector, mounting holder and wire harness.

2-functional LED clearance lamp - low power consumption.
European E9 homologation
ElectroMagnetic Compatibility – EMC certificate
Shock-resistance – PC lampshade
Optional polarity connection

Lamp functions:
- rear clearance light with reflector
- front clearance light with reflector
- side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
- white or yellow light 12V/24V = 0,04A/0,04A
- red light 12V/24V = 0,03A/0,03A

Rated power:
- white or yellow light 12V/24V = 0,5W/1W
- red light 12V/24V = 0,4W/0,8W

Stock: > 1 pcs.

FT-060L B+K LED

Price: 6.00 €

LED gabarīta lukturis

White LED clearance lamp 12-30 V, right with reflector, mounting holder and wire harness.
2-functional LED clearance lamp - low power consumption.
European E9 homologation
ElectroMagnetic Compatibility – EMC certificate
Shock-resistance – PC lampshade
Optional polarity connection

Lamp functions:
- rear clearance light with reflector
- front clearance light with reflector
- side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
- white or yellow light 12V/24V = 0,04A/0,04A
- red light 12V/24V = 0,03A/0,03A

Rated power:
- white or yellow light 12V/24V = 0,5W/1W
- red light 12V/24V = 0,4W/0,8W

Stock: > 1 pcs.

FT-060P B+K LED

Price: 6.00 €

LED gabarīta lukturis

Red LED clearance lamp 12-30 V, left with reflector, mounting holder and wire harness.
European E9 homologation
ElectroMagnetic Compatibility – EMC certificate
Shock-resistance – PC lampshade
Optional polarity connection

Lamp functions:
- rear clearance light with reflector
- front clearance light with reflector
- side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
- white or yellow light 12V/24V = 0,04A/0,04A
- red light 12V/24V = 0,03A/0,03A

Rated power:
- white or yellow light 12V/24V = 0,5W/1W
- red light 12V/24V = 0,4W/0,8W

Stock: > 1 pcs.

FT-060L C+K LED

Price: 6.00 €

LED gabarīta lukturis

Red LED clearance lamp 12-30 V, right with reflector, mounting holder and wire harness.
European E9 homologation
ElectroMagnetic Compatibility – EMC certificate
Shock-resistance – PC lampshade
Optional polarity connection

Lamp functions:
- rear clearance light with reflector
- front clearance light with reflector
- side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
- white or yellow light 12V/24V = 0,04A/0,04A
- red light 12V/24V = 0,03A/0,03A

Rated power:
- white or yellow light 12V/24V = 0,5W/1W
- red light 12V/24V = 0,4W/0,8W

Stock: > 1 pcs.

FT-060P C+K LED

Price: 6.00 €

LED gabarīta lukturis

Yellow LED clearance lamp 12-30V with reflector, mounting holder and wire harness.
European E9 homologation
ElectroMagnetic Compatibility – EMC certificate
Shock-resistance – PC lampshade
Optional polarity connection

Lamp functions:
- rear clearance light with reflector
- front clearance light with reflector
- side clearance light with reflector

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
- white or yellow light 12V/24V = 0,04A/0,04A
- red light 12V/24V = 0,03A/0,03A

Rated power:
- white or yellow light 12V/24V = 0,5W/1W
- red light 12V/24V = 0,4W/0,8W

Stock: > 1 pcs.

FT-060 Z+K LED

Price: 6.00 €