Protection bars

Bumper protection TOYOTA LAND CRUISER 120

Stock: 0 pcs.

Lukturu turētājs MERCEDES BENZ SPRINTER, VW CRAFTER

Lamp holder MERCEDES BENZ SPRINTER, VW CRAFTER
Set 818013 consists of: 888497 (lamp holder) and 818649 (mounting kit)

Stock: 0 pcs.

Sliekšņu trubas NISSAN QASHQAI

Stainless steel side bars with plastic steps - Nissan Qashqai 2021-
Side steps with plastic covers provide the best grip during severe weather conditions. Plastic covers are reliable and stable when getting into the car, even during snowy winters and heavy rainfalls. In winter side steps will serve as a practical support during snow removal from the roof, and in summer they will facilitate loading equipment on the roof rack.
Stainless steel steps with 70mm diameter and 2 mm thickness and combination with a hand-finished provide the product for years not only one season.
With the product you will find a stainless steel mounting set for your car and instructions for easy installation. Solid construction ensures static load at 115 kg

Stock: 0 pcs.

Aizsargstienis FORD TOURNEO CONNECT 18 - 22

Bar 807175 for FORD TOURNEO CONNECT 18 - 22
The product is valid according to UNECE R26 / R61 legislation.
Weight -8 kg.
Material - AISI304.
Pipe diameter - 45 mm.
Installation time is 30 minutes.

Stock: 0 pcs.

Sliekšņu trubas FORD TRANSIT CUSTOM

Side bars 807463 for FORD TRANSIT CUSTOM
-wheelbase L2
The product is valid according to UNECE R26 / R61 legislation
Material - AISI304.
Pipe diameter - 60 mm.
Installation time is 30 minutes.

Stock: 0 pcs.

Front bar FORD TRANSIT CUSTOM

Trunk rubber mat - especial made mat for each model using 3D floor scan technology.

Stock: 0 pcs.

Lamp holder SCANIA P/S/R/G

Arc for mounting headlights , with 4 LED lamps.
- pipe diameter: 60mm.
- weight: 7,8 kg.
Installation time 60 min.
Instructions and necessary mounting brackets.

Stock: 0 pcs.

Aizsargstienis FORD RANGER

Code R12-R1285-06V2.
Front bar for FORD RANGER.
This product has an EU CERTIFICATE, which allows it to be used throughout the EU, as well as pass vehicle inspection without having to remove it.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight: 9 kg
Includes mounting instructions and necessary mounting brackets.
Compatible with parking sensors.
Compatible with ACC.

Stock: 0 pcs.

Front bar CITROEN JUMPER,FIAT DUCATO,PEUGEOT BOXER

Stock: 0 pcs.

Bumper protection OPEL VIVARO,RENAULT TRAFIC

rear pipe 60mm.

Stock: 0 pcs.

Aizsargstienis IVECO DAILY

Towbar DAILY-R1970-06 for IVECO DAILY 2019-.
This product has an EU CERTIFICATE, which allows it to be used throughout the EU, as well as pass vehicle inspection without having to remove it.
Designed in accordance with new EU standards as well as the requirements of directive 78/2009 / EC.
Made of high quality stainless steel (AISI 304).
The product is hand polished.
Pipe diameter: 70mm
Wall thickness: 2 mm
Weight: 7,5 kg
Includes mounting instructions and all necessary mounting brackets.

Stock: 0 pcs.

Aizsargstienis IVECO DAILY

Towbar black color DAILY-R1970-06-B black color for IVECO DAILY 2019-.
This product has an EU CERTIFICATE, which allows it to be used throughout the EU, as well as pass vehicle inspection without having to remove it.
Designed in accordance with new EU standards as well as the requirements of directive 78/2009 / EC.
Made of high quality stainless steel (AISI 304).
The product is hand polished.
Pipe diameter: 70mm
Wall thickness: 2 mm
Weight: 7,5 kg
Includes mounting instructions and all necessary mounting brackets.

Stock: 0 pcs.

Sliekšņu trubas VW CADDY

- 840435 -side bars for Volkswagen Caddy Maxi version.
- WHEELBASE L2.

Stock: 0 pcs.

Aizsargstienis TOYOTA LAND CRUISER 150

Code DLC150-R0085-06.
Front bar for TOYOTA LAND CRUISER 150 .
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight:10,3 kg
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.

Front bar VW T 6

Stock: 0 pcs.

Sliekšņu trubas ISUZU D-MAX

Stainless steel side bars
Designed for Isuzu D-Max 2020-.
A set of fasteners and installation instructions are included with the side bars.
Sill pipes for the car are installed in the installation locations in accordance with the instructions.
They facilitate access to the car and protect the sides of the car from mechanical damage when driving off-road.

Pipe diameter: 70 mm
Wall thickness: 2 mm

Stock: 0 pcs.

Sliekšņu trubas JEEP GR CHEROKEE

Stainless steel side bars with plastic steps - Jeep Grand Cherokee (2011 -2014)
STEELER® side steps - Jeep Grand Cherokee - safety and comfort.

Side steps with plastic covers provide the best grip during severe weather conditions. Plastic covers are reliable and stable when getting into the car, even during snowy winters and heavy rainfalls. In winter side steps will serve as a practical support during snow removal from the roof, and in summer they will facilitate loading equipment on the roof rack.

Stainless steel steps with 70mm diameter and 2 mm thickness and combination with a hand-finished provide the product for years not only one season.

With the product you will find a stainless steel mounting set for your car and instructions for easy installation. Solid construction ensures static load at 115 kg, so the steps can be successfully used by adults.

Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry.

We confirm the quality of our products, providing a 24-month warranty on the polished bars and a 12 month warranty on the black bars paintwork.

Bar diameter 70 mm
Crossbar diameter -
Thickness 2 mm

Stock: 0 pcs.

Front bar SUZUKI S-CROSS

Stock: 0 pcs.

Aizsargstienis SUBARU FORESTER

Code FORESTER-R0070-06.
Front bar for SUBARU FORESTER.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70mm
- Wall thickness: 2 mm
- Weight: 11,5 kg
Includes mounting instructions and necessary mounting brackets.
Also available in black color.

Stock: 0 pcs.

Aizsargstienis DACIA DUSTER

Code DUSTER-R1860-03.
Front bar for DACIA DUSTER.
This product has an EU CERTIFICATE, which allows it to be used throughout the EU, as well as pass vehicle inspection without having to remove it.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 60 mm
- Wall thickness: 2 mm
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.