Instruments

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: > 1 pcs.

Adhesive tape

Stock: > 1 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Kombinēta atslēga

Made of the chrome-vanadium tool steel by the hot stamping method.
Has a standard open end profile and OVER DRIVE box end working profile.
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
15 degrees offset of the box end profile relatively to the wrench surface for more convenient mounting works.
Wrench is protected from corrosion by the matt nickel-chromium coating.

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Muciņas un piederumi

Deep socket 1/4'
6-point operating profile.
Made by the method of cold stamping.
Material - chrome-vanadium tool steel CrV50BV30.
Hardened to 45-47 HRC.
Protected from corrosion by chrome plating.
A-10mm
L-50mm

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Caurules atslēga

Made by cold stamping method from steel pipe with wall thickness 2 mm.
Has a hole for the tap wrench with Ø 8 mm.
Hardened to 38-42 HRC.
Protected against corrosion by the nickel-chromium coating with the matt surface effect.

Stock: 0 pcs.

Kombinēta atslēga

Spanner is made by the hot stamping method (forging hammers).
Has a standard open end profile and 12 point box end profile.
Material – chrome-vanadium tool steel CRV6150.
Protected from corrosion by chrome coating with matt surface effect.

Stock: 0 pcs.

Muciņas un piederumi

Hex socket 1/4'
6-point operating profile.
Made by the method of cold stamping.
Material - chrome-vanadium tool steel CrV50BV30.
Hardened to 45-47 HRC.
Protected from corrosion by chrome plating.

A-10mm
L-25mm

Stock: 0 pcs.