Lighting and lamps

Režģa stiprinājumi

Linear centre mounting bracket includes A2 stainless steel hardware combined with extremely tough PA66 GF30 (glass filled nylon) ruggedised mounts. The mount fixes into the channel on the back of the Linear heatsink, and secured using M5 grub screws. Bracket orientation can be reversed in order to have the light mounted upwards or hanging down relative to the vehicle mounting point. Mounting kit includes anti-rotation features.
For use with Linear products only.

Stock: > 1 pcs.

Režģa stiprinājumi

The LAZER-1121K kit consists of a 2-mm thick stainless steel stabilizing bracket, consisting of two parts, which corresponds to the Lazer Lamps series of Triple-R or ST / T LED floodlights.
The stabilizer arm is attached to the lamp using the supplied low-profile bracket, and then secured to an additional rigid mounting location on your vehicle, thereby reducing vibration, stress and movement, which can affect some lighting installations.
Length: 130 mm - 230 mm

Stock: > 1 pcs.

Lazer gaismas kliedētājs

The amber lenses for the Triple-R range of lights alters the standard 5000 kelvin colour temperature to ‘selective yellow’. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
Come supplied with 4x spring clips.

-not designed for lamps of the second generation, newer releases.

Stock: 0 pcs.

Papildlukturis LED

Combination of highly efficient 3W ‘premium bin’ LEDs
Vacuum-metallised optics deliver wide spread of light
Flexible mounting options – anti-theft mounting brackets included
Sleek, low profile design facilitates installation
Electronic thermal management
‘Unbreakable’ and hardcoated polycarbonate lens*
Anodised aluminium heatsink provides for improved thermal dynamics (see Download section for Care Instructions)
ECE approved for on-road use
IP67 watertight
5 year warranty
Supplied with male/female connectors (pre-wired)
Designed & manufactured in Britain.

-Voltage Range 9-32V
-LED Life 50,000 hours
-Weight 495 gr
HIGH BEAM FUNCTION
-Total Luminous Flux 4050 Lm
-Number of High Output LEDs -12
Power Consumption 42 Watts
Current Draw (at 14.4V) 2.9 Amps
CERTIFICATION
High Beam ECE R112
ECE Reference 17.5
DIMENSIONS
Width 232 mm
Depth 62 mm
Height 40 mm
PHOTOMETRIC DATA
0.25 lx Line 563 metres
0.5 lx Line 398 metres
1 lx Line 282 metres
3 lx Line 163 metres
- for connection it is necessary to use a set of wires LAZER 8225-12VSW
during installation, an optional bracket LAZER-1124K can be used

Stock: > 1 pcs.

LED autospuldze

LED CANBUS 12SMD
- white 12V / 24V
PRODUCT DESCRIPTION-
Dimensions - 36 / 9mm (length / width).
Color - 5600 K.
LED diode - 12 x 4014.
Power consumption - 2 watts.
Voltage - 12 / 24V.
Bipolar.

Stock: > 1 pcs.

LED autospuldze

Code 01097
LED lamp
12V, white BA9S, in set 2.pcs

Stock: > 1 pcs.

Papildlukturi LED

-18 watt
  -9-30 V
1500lm 6x LED SMD2525
- ECE-R10
Size-154mm x53mm x38mm
light output -18W.
Case Material: Aluminum
Bracket Material: Stainless Steel
  Lens Material: PC
Color Temperature: 6000-6500k

Stock: > 1 pcs.

Montāžas kronšteins

Headlamp mount.kitfor VW AMAROK, mounted in original position, without drilling.

Color: Black

Stock: 0 pcs.

Slēdzis

The switch with the control indicator of 12 volts.

Stock: 0 pcs.

Slēdzis

The switch with the control indicator of 12 volts.

Stock: > 1 pcs.

Left front fog lamps

Stock: > 1 pcs.

Lazer lukturu aizsargs

Made from high-tech impact-resistant and washable neoprene, the new Lazer Lamps universal LED covers are available in 5 different lamp sizes. Protected by high-strength Velcro pads, the covers are easy to install and remove.
Optimally designed covers optimized for the Triple-R series, but potentially suitable for any kind of LED light barriers, also have the advantage of significantly reducing the wind noise that may come from some of the larger lamps when installed above the windshield.

Stock: > 1 pcs.

Papildlukturis LED

00R4-PL-STD
Lazer Lamp
Set 1 pcs
Ultra long-range optics
• High output LED’s from world leader in LED technology
• Integrated Position Lights for added safety and improved styling
• CAE optimised heatsink
• Electronic thermal management
• ‘Unbreakable’ polycarbonate lens
• Innovative design and unique styling
-during installation, LAZER 8231-12VSP wires are required.

Stock: 0 pcs.

Grille mount brackets

The brackets are made of high-strength, UV-resistant ASA material.
-the brackets are intended for fixing the headlights to the car grille.

Stock: 0 pcs.

Wire harness for work lamps

LB0062
WIRING HARNESS FOR LED LAMPS AND PANELS
IN VEHICLES, AGRICULTURAL AND CONSTRUCTION MACHINES, QUADRICYCLES, BOATS AND OTHER EQUIPMENT.
- The power switch has light indicators indicating on and off, the bottom of the switch is glued with adhesive tape for easy installation.
The unit is protected by a 15 A fuse.
The lamp cable has a plug suitable for most types of lamps (the plug can be cut off and any lamp available on the market can be connected to the cables).
Power Cable Length - Relay: 0.5m
Cable Length of Relay Lamp: 2m
Relay Switch Cable Length: 2.8m
The kit includes:
- complete set with connectors
- power switch with LED indicators
- 12V relay
- SEALED
- CABLE-3M
-POWER 12 V MAX. 120 watts

Stock: > 1 pcs.

Gaismas atstarotājs

Yellow round reflector mounted with adhesive tape.

Stock: > 1 pcs.

LED bākugunis

12 LED beacon
Powered by voltage-12-24V
Protection class -IP67 waterproof
54 W power consumption
Case material / color - plastic, orange
The size of the lamp - 140x87mm
Wide illumination angle
Certifications - CE, ECR10
working temp. -30 ° С / + 50 ° С
Body color - black
Type of hardware magnet
Service life - 50000 hours

Stock: 0 pcs.

Lampu turētājs

Mounting bracket for warning lamps
AKC1007L-A
- with wires 25 cm
- weight 0,23 kg

Stock: 0 pcs.

Gabarīta lukturis LED

3-functional LED side marker, right, short straight rubber bracket, 2x0.75 mm² cable 0.5 m long.
3-functional universal LED clearance lamp with the rubber bracket
and removable opitacal module – low power consumption
- european E9 homologation
- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection

Lamp functions:
- white clearance light
- red clearance light
- yellow clearance light

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
- 12V/24V = 0,1A/0,1A

Power consumption / Rated power:
- 12V/24V = 1,2W/2,4W

Stock: > 1 pcs.

Gabarīta lukturis LED

3-functional LED side marker, left, short straight rubber bracket, 2x0.75 mm² cable 0.5 m long.
3-functional universal LED clearance lamp with the rubber bracket
and removable opitacal module – low power consumption
- european E9 homologation
- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- optional polarity connection

Lamp functions:
- white clearance light
- red clearance light
- yellow clearance light

Technical specification:
- supply voltage: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight

Power consumption:
- 12V/24V = 0,1A/0,1A

Power consumption / Rated power:
- 12V/24V = 1,2W/2,4W

Stock: > 1 pcs.