Moto accessories

Order by:
 
 
Product Code Price Number
3-riteņu transporta rampas adapteris

The AC-005 tricycle adapter allows you to transport a three-wheel motor vehicle. This accessory greatly facilitates the loading and unloading of the three-wheeled motor vehicle.

It takes about 15 minutes to remove the stock wheel choke top and install the 3 wheel adapter.

Stock: 0 pcs.

AC-005

Price: 417.45 €

Reflective vest L size

Stock: > 1 pcs.

KM-L

Price: 35.00 €

Reflective vest M size

Stock: > 1 pcs.

KM-M

Price: 35.00 €

Reflective vest S size

Stock: > 1 pcs.

KM-S

Price: 35.00 €

Reflective vest XL size

Stock: > 1 pcs.

KM-XL

Price: 35.00 €

Reflective vest XXL size

Stock: > 1 pcs.

KM-XXL

Price: 35.00 €

Bezskrūvju stiprinājuma komplekts rampai

Using the AC 012 boltless attach kit one can attach the ramp to vehicles without drilling holes in the cargo bed. You can attach / remove the ramp in a matter of minutes.
From a legal point of view, when the ramp is strapped to a vehicle, and not bolted, it is regarded as “payload” in most countries and therefore exempt of many regulations regarding changes made to a vehicle.
From a practical point of view, users can easily detach the ramp from one vehicle and then attach to another, which makes life easier for many motorcycle owners. It makes it also possible to rent the ramp out to people that need transporting motorcycles for either professional or leisure use.

Stock: > 1 pcs.

AC-012

Price: 320.65 €

Elkoņu balsti

Motorcycle passenger armrests.
Suitable for 2018-2020 Honda Gold Wing motorcycles.
Armrests provide passenger comfort during long journeys.
Thanks to the possibility of folding, it is enough to fold them up to make it easier for the passenger to get on and off the motorcycle.
- Durable aluminum and cast steel construction with soft padding.
- Armrest dimensions: length 17 cm, width 6 cm, thickness 3.8 cm.
- Installation is made in place of the original holes, fastening with bolts, drilling is not required.

Stock: 0 pcs.

KY-6770

Price: 441.00 €

Īsais rampas pagarinājums

This accessory attaches to the main frame of the ramp. It is mainly used for motorcycles with a long wheelbase for loading into buses. This allows the motorcycle to be slid further into the bus so that the rear door can be closed.

Stock: 0 pcs.

AC-003

Price: 235.95 €

Izjaucamā moto rampa

The AUN-250S-K ramp, which can be easily and quickly disassembled and reassembled, is a versatile loading, unloading and transportation solution for motorcycle transport and cargo.

Key Features:
- Motorcycle lift and cargo platform. The ramp effortlessly lifts any moto equipment and cargo (the weight of which does not exceed 550 kg).
- Made of high class alloy. Metal parts are galvanized and powder coated for long-lasting performance.
- The ramp is adaptable to any car, as it can be cut or extended. Load or unload your motorcycle or cargo quickly and easily with the help of a cordless screwdriver. The battery tool has a recommended torque of 60 Nm, providing efficient performance with 18 or 24 V professional tools.
- Available accessories - The ramp can be equipped with various accessories to increase the loading / unloading height or reduce the loading / unloading angles.

1. AC-001 Ramp extension gives the possibility to load any type of motorcycle equipment or cargo up to 1.5 meters.
2. AC-003 Used for motorcycles with a long wheelbase for loading into buses. This allows the motorcycle to be slid further into the bus so that the rear door can be closed.
3. AC-004 Adapter allows you to close the tailgate of the pickup truck after loading the motorcycle.
4. AC-005 Adapter allows to transport three-wheeled motor transport.
5. AC-006 Adapter for snowmobiles.
6. AC-008 Adapter to be able to load, unload and transport different types of cargo, pallets, lawnmowers, barrels, etc.
7. AC-012 Screwless mounting kit. Possibility to fix the ramp without screwing it to the car body. Allows you to use the same ramp on all your cars.
8. AC-023 Adapter allows loading motorcycles up to 3 meters long.

Stock: 0 pcs.

AUN-250S-K

Price: 3260.95 €

Ķēžu smērviela

KL-FSM Extreme Duty Chain Lube T20
KLFSM is a solvent free product designed to substantially enhance chain life while reducing wear and friction. KLFSM will reduce corrosion, and help to keep debris from sticking to the chain. KLFSM treated chains lead to reduced down time and reduced energy consumption. KLFSM is engineered for high-heat applications.

Product uses:

bike & bicycle chains
industrial chains

Stock: > 1 pcs.

629196630220

Price: 5.00 €

Ķēžu smērviela

K2 OFF-ROAD Chain Grease - is a highly efficient grease designed to lubricate chains and drive sprockets in off-road motorcycles and quads. Thanks to its lubricating and penetrating properties, it penetrates all gaps, protecting the chain and sprockets from premature wear. It can be used in all types of chains, x-ring, o-ring, z-ring, etc.

The biggest advantage of K2 OFF-ROAD chain grease is that after application it remains in a semi-liquid form, leaving a lubricating and protective layer. Mud, sand and other elements of the ground do not stick to this layer, and all contamination is removed with the rotation of the drive set. Thanks to this, it remains clean longer, which reduces friction between the chain and sprockets and significantly extends their service life.

The frequency of chain lubrication depends on the conditions in which the motorcycle is driven (mud, dust, sand, water, rocks, snow).

We recommend lubricating the chain before each off-road trip. However, it is important to remember that the lubricated chain should be free of dirt.

Stock: > 1 pcs.

K2-00651

Price: 7.00 €

Atv cover L size + box, length 180-215cm

Weatherproof cover for moto transport, to protect from the negative impact of the environment. Provides indoor and outdoor protection. The cover is made of gray, water-repellent material, also equipped with ventilation holes for moisture removal. High-quality polypropylene with a soft inner finish prevents scratching and protects against ultraviolet rays. On the bottom edge there is a cord for tightening.dasdasdas

Stock: 0 pcs.

5-4195-248-3020

Price: 35.00 €

Atv cover L size, length 180-215cm

Weatherproof cover for moto transport, to protect from the negative impact of the environment. Provides indoor and outdoor protection. The cover is made of gray, water-repellent material, also equipped with ventilation holes for moisture removal. High-quality polypropylene with a soft inner finish prevents scratching and protects against ultraviolet rays. On the bottom edge there is a cord for tightening.dasdasdas

Stock: > 1 pcs.

5-4194-248-3020

Price: 31.00 €

Atv cover M size, length 155-180cm

Weatherproof cover for moto transport, to protect from the negative impact of the environment. Provides indoor and outdoor protection. The cover is made of gray, water-repellent material, also equipped with ventilation holes for moisture removal. High-quality polypropylene with a soft inner finish prevents scratching and protects against ultraviolet rays. On the bottom edge there is a cord for tightening.dasdasdas

Stock: > 1 pcs.

5-4192-248-3020

Price: 31.00 €

Atv cover S size, length 140-155cm

Weatherproof cover for moto transport, to protect from the negative impact of the environment. Provides indoor and outdoor protection. The cover is made of gray, water-repellent material, also equipped with ventilation holes for moisture removal. High-quality polypropylene with a soft inner finish prevents scratching and protects against ultraviolet rays. On the bottom edge there is a cord for tightening.dasdasdas

Stock: > 1 pcs.

5-4190-248-3020

Price: 29.00 €

Moto rack system

Stock: 0 pcs.

GOLD-28222

Price: 585.00 €

Moto ķēžu eļļa

Chain Lubricant protects very well, deeply penetrates, fast evaporates solvent contains. It is resistant to leaching by water, protects against corrosion and aggressive external factors, by reducing friction reduces wear. It contains an increased amount of Teflon. For use in the usual chains and those equipped with O-Ring, X-Ring, or Z-Ring seals. 360 * Special nozzle allows application at any angle.

Clean the chain of the old grease and dirt. Apply Chain Lubricant directly and uniformly on clean chain, keep distance of 20 cm while applying.

Stock: 0 pcs.

M06.ķēdēm.100ml

Price: 3.00 €

Moto rampa

The AUN-200 ramp is a versatile loading, unloading and transportation solution for motorcycle transport and cargo.

Key Features:
- Motorcycle lift and cargo platform. The ramp effortlessly lifts any moto equipment and cargo (the weight of which does not exceed 550 kg).
- Made of high class alloy. Metal parts are galvanized and powder coated for long-lasting performance.
- The ramp is adaptable to any car, as it can be cut or extended. Load or unload your motorcycle or cargo quickly and easily with the help of a cordless screwdriver. The battery tool has a recommended torque of 60 Nm, providing efficient performance with 18 or 24 V professional tools.
- Available accessories - The ramp can be equipped with various accessories to increase the loading / unloading height or reduce the loading / unloading angles.

1. AC-001 Ramp extension gives the possibility to load any type of motorcycle equipment or cargo up to 1.5 meters.
2. AC-003 Used for motorcycles with a long wheelbase for loading into buses. This allows the motorcycle to be slid further into the bus so that the rear door can be closed.
3. AC-004 Adapter allows you to close the tailgate of the pickup truck after loading the motorcycle.
4. AC-005 Adapter allows to transport three-wheeled motor transport.
5. AC-006 Adapter for snowmobiles.
6. AC-008 Adapter to be able to load, unload and transport different types of cargo, pallets, lawnmowers, barrels, etc.
7. AC-012 Screwless mounting kit. Possibility to fix the ramp without screwing it to the car body. Allows you to use the same ramp on all your cars.
8. AC-023 Adapter allows loading motorcycles up to 3 meters long.

Stock: > 1 pcs.

AUN-200-K

Price: 2837.45 €

Motocikla lādētājs ar voltmetru

Motorcycle charger with voltmeter - waterproof cigarette lighter socket with dual USB and digital voltmeter.
The kit includes brackets for mounting on the handlebars of a motorcycle or under a mirror.
Technical data:
- 12 V DC
- 2xUSB
- Current consumption: 4.2 A

Stock: > 1 pcs.

63209

Price: 15.00 €