Dienas gaitas lukturis LED
Daytime running lights FT-300 LED.
- Low power consumption.
- Overvoltage protection.
- Equipped with a system - STANDBY, the automatic switching off of the daytime running lights occurs when the low, high or fog light is turned on.
- Cable length 3.5 m.
- Can be installed on a flat surface or with a corner bracket.
- 2 pieces in a set.
Stock:
> 1 pcs.
|
|
|
|
|
Dienasgaismas lampas LED
Daytime Running Light Set for TOYOTA HILUX 2012-2015 (version after facelift)
Thanks to the use of LED technology, lamps not only consume less energy, but also look great, giving a modern touch to the car's style. LED lights emit a strong white light, which makes the car more visible, which increases traffic safety.
The set includes two wired lamps and a control unit. The product is made of high quality automotive ABS plastic.
The lamps are installed in place of the factory bumper grille. Due to the fact that the product is intended for a specific car model, you can be sure that the offered lamps will not require any additional modifications during installation. The lights are connected via a relay (not included).
Input voltage: 12V DC
Stock:
0 pcs.
|
|
|
|
|
Dienasgaismas lampas LED
Daytime running lamp set with turn signal.
Designed for TOYOTA HILUX 2016 - (factory halogen version).
Lamps made in multi LED technology - type 'ice cube'
Thanks to the use of LED technology, lamps not only consume less energy, but also look great, giving a modern touch to the car's style. LED lights emit a strong white light, which makes the car more visible, which increases traffic safety.
The set includes two wired lamps and a control unit. The product is made of high quality automotive ABS plastic.
The lamps are installed in place of the factory bumper grille. Due to the fact that the product is intended for a specific car model, you can be sure that the offered lamps will not require any additional modifications during installation.
Parameters:
Lamp power: each 3.6W
Input voltage: 12V DC
Stock:
0 pcs.
|
|
|
|
|
Dienasgaismas lukturi
Daytime running lamp set with turn signal.
Designed for TOYOTA HILUX 2016 - (factory halogen version).
Lamps made in multi LED technology - type 'ice cube'
Thanks to the use of LED technology, lamps not only consume less energy, but also look great, giving a modern touch to the car's style. LED lights emit a strong white light, which makes the car more visible, which increases traffic safety.
The set includes two wired lamps and a control unit. The product is made of high quality automotive ABS plastic.
The lamps are installed in place of the factory bumper grille. Due to the fact that the product is intended for a specific car model, you can be sure that the offered lamps will not require any additional modifications during installation.
Parameters:
Lamp power: each 3.6W
Input voltage: 12V DC
Stock:
0 pcs.
|
|
|
|
|
Dienasgaismas spuldzes LED
Car manufacturers increasingly equip cars with additional LED lights for daytime driving called DRL (Daytime Running Lights). There is also undoubtedly the fashion for installation this type of lighting in older vehicles. As show the recent laboratory studies made by major automotive manufacturers of lighting systems - it is not solely dictated by the desire to embellish the car, but action to achieve savings during its everyday use.
ECONOMICS AND VERSATILITY
The set of ordinary halogen bulbs applied in low beam headlamps uses about 100-150W. The set of two daytime running lamps LPQ080 produced by Magneti Marelli, made using the latest generation of LED consumes only 4W (2x2W), which is certainly an excellent result among all the major manufacturers of this type of lighting. In addition, long service life of the DRL diodes, used in the set of LPQ080 reaches up to 100.000 hours of continuous operation, which is several times more than standard bulbs. This translates immediately to reduce fuel consumption of up to 0,25 L/ 100km, because that much consumes a moving car with low-beam headlamps. Daytime running lamps do not practically aff ect the size of the combustion of a car, and their use is essentially maintenance-free. A wide range of options for power supply of daytime running lamps kit LPQ080 of Magneti Marelli (12V/ 24V) gives great versatility of use (passenger cars, vans and trucks).
HOW TO CHOOSE THE PROPER ONE?
In this case, we must be very careful. To make the use of this kind of light legal, it has to meet several conditions. The cheap sets present on the market, sold as daytime running lamps, often have no characteristics and certi cates required by law. First of all, when deciding to purchase this type of lights, it should be noted that they have HOMOLOGATION. Its E-mark together with the identi cation code of the country, which issued the certi cate should be kept on the glass lamps DRL. Choose only the daytime lamps approved for use with a clear, indelible and visible markings after installation on the lens re ector in the form of letters RL and with a number of version of the Regulations under which the certi cate was issued. The minimum required by European regulations approval, the illuminating surface of each of the daily lamps should be 25cm². A set of daytime running lamps LED LPQ080 of Magneti Marelli, of course, has all features listed above and required by law.
SAFETY - BE VISIBLE
According to European Commission Regulation ECE R87 all new passenger car models that obtained homologation after 01.01.2011 must necessarily be equipped by the factory with daytime running lights. Excellent visibility of the car in the set of Magneti Marelli daytime running lamps LPQ080 provides LED that emit light at very high colour temperature, as much as 6000 Kelvin’s degrees. Such light is visibly cutting o ff from natural sunlight and does not dazzle. The bright, white color ensures that we run the car which is already noticeable from a distance to other road users. A car equipped with daytime running lamps can use them during the day as the primary lighting.
STANDBY SYSTEM
According to law, DRL lights should automatically turn on and in such standard daytime running lights LPQ080 of Magneti Marelli work. Used in this set electronic system 'sleep' - STANDBY – turn on DRL headlights with the starting of the vehicle and the emergence of an appropriate voltage in the electrical system, and daytime running lights automatically turn o ff after starting low beam headlamp, high beam headlamp and fog lamps.
PROPER INSTALLATION
Although the connection of daytime lamps set LPQ080 Magneti Marelli for the electrical system of the car is very simple, it has to be made according to strict rules of law and based on the absolutely basic knowledge of electrical installations. Detailed instruction in the picture version, included with each set of daily lamps LPQ080 Magneti Marelli makes its installation not complicated and time consuming for the average user of the car.
TECHNICAL DATA:
4-LED'S TECHNOLOGY
PRODUCT MADE IN EU
VOLTAGE RANGE: 12/ 24V (CARS, VANS, TRUCKS)
POWER CONSUMPTION 12/24V = 2 x 2W = 4W/ SET
COLOR TEMPERATURE: 6000 K (KELVIN)
LUMINOUS LIGHTS INTENSITY - 220 LM (LUMEN)
EQUIPPED WITH STANDBY SYSTEM
E9 EUROPEAN PRODUCT HOMOLOGATION
MANUFACTURED ACCORDING TO ECE R87 EUROPEAN COMISSIOM REGULATION
DIMENSIONS: 23mm/ 126mm/ 29mm (H/ W/ D)
ALL ACCESSORIES AND MANUAL ASSEMBLY INSTRUCTION AVAILABLE IN EACH BOX
Stock:
> 1 pcs.
 |
|
|
|
|
Dienasgaismas spuldzes LED
Set of LED daytime running lamps – low power consumption
- european E9 homologation
- ElectroMagnetic Compatibility – EMC certificate
- shock-resistance – PC lampshade
- reverse polarity protection system
- automatic switching-off of daytime running lamps at vehicle start (STANDBY system),
The set is fully accustomed to the hybrid vehicles drivetrain and the start-stop engine system.
Technical specification:
- voltage range: 12-36V DC
- operating temperature: – 40°C to +55°C
- lamp is resistant to any weather conditions
- lamp is fully airtight
Power consumption / Rated power consumption:
12V/24V = 0,28A/3,4W, 0,14A/3,4W
Set of Daytime Running Lamps, 18-LED, carton box, 2 pcs. All accessories and instalation manual included.
Stock:
0 pcs.
|
|
|
|
|
Dienasgaismas spuldzes LED
Daytime running lights DRL 510HP
DESCRIPTION
Daytime running lights DRL 510HP can be used in round holes prepared for the fog lights and flat surfaces of bumper. This is possible thanks to masking flanges, which successfully hides the bumper's mounting hole and differences in size of the space that left after fog lamps dismantling. From a technical point of view the usage of 1W SMD LEDs and perfectly shiny reflector provides extremely good road lightening. Moreover the back part of the tube acting as a radiator effectively dissipates heat from inside the tube and extends the entire system's lifetime.
Full specification:
Diodes - 4 x SMD 1W/ per lamp
Size (length x height x width) - ø70 (ø80) x 63 (mm)
Main board - Aluminium
Total power consumption - 11,16W
Voltage - 12-24V
Homologation - RL00, E4. Entry into service on the basis of RCE87
Heat radiator removal - Yes
Waterproofness - Yes
Clamping handle - Yes
Vent hole with pressure regulator - Yes
Automatic switch included - Yes
Machinery integrated elements - Yes
Reflector - Shiny
Front glass - PE (in keeping with UE's requirements and safe)
Stock:
0 pcs.
 |
|
|
|
|
Dienasgaismas spuldzes LED
WARNING LIGHTS 12 / 24V 16W, SET OF 4 PCS. WITH CONTROLLER AND REMOTE ON CABLE
Set of 16 high intensity LED bulbs.
Has a choice of 7 lighting programs via the controller and a memory function for the last lighting option. Universal for all vehicles with 12V DC power supply, waterproof, weather resistant
Included:
- 4 LED lamps - 4 pcs.
- cable with switch
- Control block
- mounting accessories
Specifications:
Voltage: 12V
Power: 16W
Cable length: 100 cm.
Lampshade color: transparent
Light color: orange
Sealing: IP 65
Stock:
> 1 pcs.
|
|
|
|
|
LED darba lampa
Universal LED work light LED 1300 lm, 9 diodes, on a magnetic holder with a hinge, body color - black. The lamp is equipped with an extended spiral cable up to 3 m (length of the spiral 0.6 m), equipped with a standard 12 / 24V cigarette lighter plug.
The new FT-036 LED series of versatile work lights is equipped with highly efficient LEDs from OSRAM, which made it possible to achieve high lighting parameters min. 1300 lumens at a power consumption of 13.5 W.
Work lights are widely used in road and water transport, agriculture, construction and water sports, and wherever there are adverse weather conditions including high humidity. The body is made of impact-resistant materials in combination with the glass of the lantern made of polycarbonate (PC) creates a product that is extremely durable and resistant to mechanical damage, shock and moisture, which is confirmed by the relevant certificates.
The compact size allows the headlights to be installed even in the most difficult to reach places.
Headlamp parameters:
- Universal supply voltage: 12-55 V DC
- Current consumption = 12V / 24V / 48V = 1.1A / 0.55A / 0.28A
- Rated power: 13.5W
- Color temperature 6000 K
- Actual (measured) light output min. 1300 lm.
- 9 LEDs from OSRAM.
- Electromagnetic Compatibility Certificate - EMC.
- The headlamp is completely waterproof (IP68).
- Headlight resistant to shock and vibration - IK.
- Ambient operating temperature range from - 40 ° C to + 35 ° C.
- The headlamp is protected against alternating polarity of the supply.
- Weight - white wire, PLUS - black wire.
Stock:
> 1 pcs.
 |
|
|
|
|
LED darba lampa
Universal LED work lamps 1300 lm, 9 diodes, joint holder, black colour housing with a Deutsch Stecker socket.
Series of universal LED work lamps FT-036 is equipped with highly efficient LED diodes made by OSRAM. That process allowed us to obtain high light paramtres, about 1300 lm for rated power consumption 13,5W. Those lamps are widely used in both road and water transportation, agriculture, construction and in every sphere where severe atmospheric conditions occur including high humidity. The body is made of shock proof material and along with the lampshade made of polycarbonate (PC) form an extremely solid and resistant to mechanical damage, moisture and shock product that is confirmed with the relevant certificate. The small size allows the lamp to be placed in even the most inaccessible places.
The FT-063 LED, FT-036 LED, FT-036 LED ALU 2800 lamp video
Technical specification:
- universal supply votlage – from 12V up to 55V DC
- power consumption: 12V/24V/48V = 1,1A/0,55A/0,28A
- rated power: 13,5W
- color temperature: around 6.000K (Kelvin)
- effective (measured) light beam – min. 1.300 lm
- 9 x OSRAM LED’s
- ElectroMagnetic Compatibility – EMC certificate
- full waterproofness (IP68)
- shock-resistance – IK
- operating temperature: – 40°C to + 35°C
- reverse polarity protection system
- fixed polarisation: GROUND - white wire, (+) - black wire
Stock:
> 1 pcs.
 |
|
|
|
|
LED darba lampa
Universal LED work lamps, joint holder, white colour casing. Made by applying acid-resistant mounting elements. Designed especially for watercraft and 1,5 m wire.
Series of universal LED work lamps FT-036 is equipped with highly efficient LED diodes made by OSRAM. That process allowed us to obtain high light paramtres, about 1300 lm for rated power consumption 13,5W. Those lamps are widely used in both road and water transportation, agriculture, construction and in every sphere where severe atmospheric conditions occur including high humidity. The body is made of shock proof material and along with the lampshade made of polycarbonate (PC) form an extremely solid and resistant to mechanical damage, moisture and shock product that is confirmed with the relevant certificate. The small size allows the lamp to be placed in even the most inaccessible places.
The FT-063 LED, FT-036 LED, FT-036 LED ALU 2800 lamp video
Technical specification:
- universal supply votlage – from 12V up to 55V DC
- power consumption: 12V/24V/48V = 1,1A/0,55A/0,28A
- rated power: 13,5W
- color temperature: around 6.000K (Kelvin)
- effective (measured) light beam – min. 1.300 lm
- 9 x OSRAM LED’s
- ElectroMagnetic Compatibility – EMC certificate
- full waterproofness (IP68)
- shock-resistance – IK
- operating temperature: – 40°C to + 35°C
- reverse polarity protection system
- fixed polarisation: GROUND - white wire, (+) - black wire
Stock:
> 1 pcs.
 |
|
|
|
|
LED darba lampa
Universal LED work lamps, joint holder, black colour casing, and 1,5 m wire. The lamp meets ADR requirements.
Series of universal LED work lamps FT-036 is equipped with highly efficient LED diodes made by OSRAM. That process allowed us to obtain high light paramtres, about 1300 lm for rated power consumption 13,5W. Those lamps are widely used in both road and water transportation, agriculture, construction and in every sphere where severe atmospheric conditions occur including high humidity. The body is made of shock proof material and along with the lampshade made of polycarbonate (PC) form an extremely solid and resistant to mechanical damage, moisture and shock product that is confirmed with the relevant certificate. The small size allows the lamp to be placed in even the most inaccessible places.
The FT-063 LED, FT-036 LED, FT-036 LED ALU 2800 lamp video
Technical specification:
- universal supply votlage – from 12V up to 55V DC
- power consumption: 12V/24V/48V = 1,1A/0,55A/0,28A
- rated power: 13,5W
- color temperature: around 6.000K (Kelvin)
- effective (measured) light beam – min. 1.300 lm
- 9 x OSRAM LED’s
- ElectroMagnetic Compatibility – EMC certificate
- full waterproofness (IP68)
- shock-resistance – IK
- operating temperature: – 40°C to + 35°C
- reverse polarity protection system
- fixed polarisation: GROUND - white wire, (+) - black wire
Stock:
> 1 pcs.
 |
|
|
|
|
LED darba lampa
Universal LED work lamps 650 lm with reversing light function (350 lm), joint holder, black colour casing and 1,5 m wire.
Stock:
> 1 pcs.
|
|
|
|
|
LED darba lampa
Universal LED work lamps 650 lm, 9 diods, magnetic joint holder, black colour casing. The lamp is additionally equipped with a 3 m long spiral lead (in spiral 0.6 m) with a standard 12/24 V cigarette lighter socket plug.
1-functional LED lamp - universal work field illumination
ElectroMagnetic Compatibility (EMC) homologation
Shock-resistance – PC lampshade
Optional polarity connection
The FT-063 LED, FT-036 LED, FT-036 LED ALU 2800 lamp video
Lamp functions:
- universal work field illumination
Lamp parameters:
- universal supply voltage – from 12V up to 36V DC
- operating temperature: – 40°C to + 55°C
- effective (measured) light beam – 650 lm
- lamp is resistant to any weather conditions
- lamp is fully airtight
Power consumption:
- 12V/24V = 0,5A/0,25A
Power consumption (rated power):
- 12V/24V = 6W/6W
Stock:
> 1 pcs.
|
|
|
|
|
LED darba lampa
LED working lamp on a magnetic holder, 12/24V.
Work lamps are used to illuminate areas around cars, tractors, slow moving machines and any other area that can be supplied with a given voltage.
Technical details:
- Dimensions: Ø87x72 mm.
- Maximum power: 18W
- Light source: 4 LEDs
- Supply voltage: DC 12V-24V
- Luminous flux: 1500 lm
- Beam Angle: 35°
- Light beam: wide
- Protection class: IP67
- Conform to EMC Directive 2004/108/EC.
- Fastening: magnetic.
- 8 m cable with cigarette lighter plug.
- On/off switch on the lamp housing.
Stock:
0 pcs.
|
|
|
|
|
LED darba lampa
Universal LED work lamp,code FT-036 LED ALU 2800 MAG M30.
The new series of universal work lights FT-036 LED ALU 2800 is equipped with CREE high-efficiency LEDs and aluminum body.
Farah has:
- 9 diodes,
- lighting parameters: min. 2800 lm at 34 W power consumption.
- black aluminum case, on a magnetic holder with a hinge,
- the length of the spiral cable in the stretched form is 3 m (the length of the spiral is 0.6 m).
-universal 12/24V cigarette lighter plug with replaceable fuse and removable red tip that allows use with EURO and DIN connectors.
Work lights are widely used in road and water transport, agriculture, construction and water sports, and wherever there are adverse weather conditions, including high humidity.
The aluminum body combined with the headlight glass made of polycarbonate (PC) creates a product that is extremely durable and resistant to mechanical damage, shock and moisture, which is confirmed by the relevant certificates. Compact dimensions allow you to install headlights even in the most inaccessible places.
Attention!
The housing of the FT-036 LED ALU 2800 headlight simultaneously performs the function of a cooling radiator and can become very hot!
Stock:
> 1 pcs.
 |
FT-036 LED ALU 2800 MAG M30
|
|
|
|
LED darba lampa
Universal LED work lamp,code FT-036 LED ALU 2800.
The new series of universal work lights FT-036 LED ALU 2800 is equipped with CREE high-efficiency LEDs and aluminum body.
Farah has:
- 9 diodes,
- lighting parameters: min. 2800 lm at 34 W power consumption.
- black aluminum case, on a magnetic holder with a hinge,
- the length of the cable: 1,5 m.
Work lights are widely used in road and water transport, agriculture, construction and water sports, and wherever there are adverse weather conditions, including high humidity.
The aluminum body combined with the headlight glass made of polycarbonate (PC) creates a product that is extremely durable and resistant to mechanical damage, shock and moisture, which is confirmed by the relevant certificates. Compact dimensions allow you to install headlights even in the most inaccessible places.
Attention!
The housing of the FT-036 LED ALU 2800 headlight simultaneously performs the function of a cooling radiator and can become very hot!
Stock:
> 1 pcs.
 |
|
|
|
|
LED darba lampa
LED work light BOSS, 12/24V.
Multifunctional LED work light is recommended for SUVs, tractors, all-terrain vehicles and off-road vehicles, rally and racing cars, agricultural and construction equipment, etc.
Specification:
- Functions: turn signals, positional, high and low beam.
- Power: 55 W
- Light source: LED
- Power supply: 9-36V
- Light temperature: 6000K
- Luminous flux: high beam 5500 lm/low beam 3600 lm.
- Operating temperature: -45°C to +85°C.
- Shape: round.
- Waterproof, shockproof, dustproof.
- Size: 7 inches/170 mm
- Thickness: 65 mm
The lamps fit like the original to these car models.
1994-2013 Electra Glide Classic FLHTC
1995-2009 Electra Glide Standard FLHT
1999-2002 Electra Glide Classic EFI FLHTCI
1994-1995 Electra Glide Road King FLHR
1995-2004 Ultra Classic Electra Glide EFI FLHTCUI
2010-2013 Electra Glide Ultra Limited FLHTK
1995-2013 Ultra Classic Electra Glide FLHTC
Fit for: Road King & CVO
2007-2013 Road King Classic FLHRC
1996-2006 Road King EFI FLHRI
2004-2006 Road King Custom EFI FLHRSI / FLHRS
1995-2014 Road King FLHR
1998-2006 Road King Classic EFI FLHRCI
2003 CVO Road King FLHRSEI
2002 CVO Road King 2 FLHRSEI2
2004-2005 CVO Electra Glide FLHTCSE
2006-2013 CVO Ultra Classic Electra Glide FLHTCUSE
Fit for: Others Motorcycle / for Jeep with 7 Inch Headlight
2009-2016 Tri Glide Ultra Classic FLHTCUTG
2012-2016 Switchback FLD
for Yamaha Road Star
for Royal Star
for Jeep Wrangler JK,LJ,TJ,CJ,2 door & umlimited 4 door
For uaz4x4 Jungle
For uaz4x4 Jungle Hunter
For uaz4x4 Jungle Hunter ALL terrain off-road MPV
1997 For Land Rover Defender 90
1994~1995 For Land Rover Defender 90
2012~2014 For Land Rover Defender 90
1995 For Land RoverRange Rover County Classic Sport Utility 4-Door
For Land Rover 90/110 1983 to 1991
For Land Rover 90/110 Defender 200 Tdi
For Land Rover 90/110 Defender 300 Tdi
For Land Rover 90/110 Defender Td5
For Land Rover 90/110 Tdci
1992~2001 For AM General Hummer
2003~2009 For Hummer H1 H2 (H2 Hummer needs 9007 to H4 adpter)(not included)
For Military Hmmwv Hummer H1 H2
For Lada 4x4 urban Niva
For UAZ Hunter
For Suzuki Samurai
For SUZUKI-Jimmy
For Suzuki Bandit 600 anno 2004
For Nissan Patrol Y60
For Nissan Safari
For Toyota FJ Cruiser
For Toyota Landcruiser HZJ75 75 78 79 series JTX
For Toyota Land Cruiser FJ40s FJ45s
For Toyota Land Cruiser FJ60
For Dodge Dakota 2004
For Mazda Miata
For Mazda Na Miata mx-5 First generation
For Mazda RX-7 1985
For 88 Porsche 924S
For Porsche 928
For Ford F-150 1976
For Ford Mustang 1965-1978
For 1967-1981 Chevy Camaro
For Mercedes BENZ-G55
For Mecesdes Benz-G
For Truck 4x4 off-road vehicle
For 2004 Santana PS10
For VW Beetle Classic
For For Mazda Miata MX5
For keenworth T-2000 1998-2010
For 7 inch Motorcycle Headlight （ check size before buy ）
Stock:
> 1 pcs.
 |
|
|
|
|
LED work/warning light
Code 1603-300642 is a compact, multifunctional 30 W Bullboy LED work light.
This innovative work light is only 44mm high and has an efficient light output with a reversing light certificate and an R65 approved signal light.
Thanks to its small size and dark reflector optics, it is easy to install even in very tight spaces. The frameless housing has a modern design and prevents snow, ice and dirt from getting on the glass.
Application:
- Working light 5500K: 6 Osram LEDs 5 W.
Characteristics:
- Dimensions : 157.00 x 43.70 x 60.00 mm
- Voltage : 10-30 V
- Lumen (theory/measured) : 2880lm/1490lm
- Power : 30W
- Color temperature : 5500K
- Wire length : 400 mm
- IP protection class : IP67, IP69K
- Approvals : R10, R65, R23
- Certificate: R65
Stock:
0 pcs.
|
|
|
|
|
Numura zīmes LED gaismas panelis NUUK E-LINE
LED license plate panel NUUK E-LINE.
Easily integrates into your license plate holder and provides a brighter, safer and more reliable night driving experience for everyone.
Perfectly complements the high beam, providing both style and functionality.
With Nuuk E-line you get excellent visibility over 400 meters, a pleasant and warm light temperature and effective brightness, creating an optimized light beam. Not only does it provide clear forward visibility, but it also detects obstacles and wild animals in advance, making night driving easy and safe.
The LED panel's slightly curved design and adjustable bolts ensure seamless integration into most vehicles with a European license plate (520x110cm).
Connect the LED strip to the battery and then directly to the high beam signal and you're done. If your vehicle is equipped with a Canbus lighting system, connect the Nuuk E-line to the Canbus interface.
If necessary, you can easily return the car to its original condition.
With a power consumption of just 82W and easy installation without the need for modifications to the front of the vehicle, Nuuk Eline is also ideal for electric vehicles.
Technical data and characteristics:
- Voltage: 9-36V
- Lumens: 8800 lm
- Measured lumen: 7800 lm
- Power: 82 W
- Light temperature: 5000K (neutral white)
- Range, illumination 1 lux: 417 m
- Cable length: 2.50 m
- Frame material: aluminum.
- Lens material: Polycarbonate.
- IP rating: IP68/IP69K
- Certificates: ECE R10, R149.
- Dimensions: 535.00 x 154.00 x 36.00 mm.
Stock:
> 1 pcs.
 |
|
|
|
|
