Dienasgaismas spuldzes LED
Car manufacturers increasingly equip cars with additional LED lights for daytime driving called DRL (Daytime Running Lights). There is also undoubtedly the fashion for installation this type of lighting in older vehicles. As show the recent laboratory studies made by major automotive manufacturers of lighting systems - it is not solely dictated by the desire to embellish the car, but action to achieve savings during its everyday use.
ECONOMICS AND VERSATILITY
The set of ordinary halogen bulbs applied in low beam headlamps uses about 100-150W. The set of two daytime running lamps LPQ080 produced by Magneti Marelli, made using the latest generation of LED consumes only 4W (2x2W), which is certainly an excellent result among all the major manufacturers of this type of lighting. In addition, long service life of the DRL diodes, used in the set of LPQ080 reaches up to 100.000 hours of continuous operation, which is several times more than standard bulbs. This translates immediately to reduce fuel consumption of up to 0,25 L/ 100km, because that much consumes a moving car with low-beam headlamps. Daytime running lamps do not practically affect the size of the combustion of a car, and their use is essentially maintenance-free. A wide range of options for power supply of daytime running lamps kit LPQ080 of Magneti Marelli (12V/ 24V) gives great versatility of use (passenger cars, vans and trucks).
HOW TO CHOOSE THE PROPER ONE?
In this case, we must be very careful. To make the use of this kind of light legal, it has to meet several conditions. The cheap sets present on the market, sold as daytime running lamps, often have no characteristics and certicates required by law. First of all, when deciding to purchase this type of lights, it should be noted that they have HOMOLOGATION. Its E-mark together with the identication code of the country, which issued the certicate should be kept on the glass lamps DRL. Choose only the daytime lamps approved for use with a clear, indelible and visible markings after installation on the lens reector in the form of letters RL and with a number of version of the Regulations under which the certicate was issued. The minimum required by European regulations approval, the illuminating surface of each of the daily lamps should be 25cm². A set of daytime running lamps LED LPQ080 of Magneti Marelli, of course, has all features listed above and required by law.
SAFETY - BE VISIBLE
According to European Commission Regulation ECE R87 all new passenger car models that obtained homologation after 01.01.2011 must necessarily be equipped by the factory with daytime running lights. Excellent visibility of the car in the set of Magneti Marelli daytime running lamps LPQ080 provides LED that emit light at very high colour temperature, as much as 6000 Kelvin’s degrees. Such light is visibly cutting off from natural sunlight and does not dazzle. The bright, white color ensures that we run the car which is already noticeable from a distance to other road users. A car equipped with daytime running lamps can use them during the day as the primary lighting.
According to law, DRL lights should automatically turn on and in such standard daytime running lights LPQ080 of Magneti Marelli work. Used in this set electronic system 'sleep' - STANDBY – turn on DRL headlights with the starting of the vehicle and the emergence of an appropriate voltage in the electrical system, and daytime running lights automatically turn off after starting low beam headlamp, high beam headlamp and fog lamps.
Although the connection of daytime lamps set LPQ080 Magneti Marelli for the electrical system of the car is very simple, it has to be made according to strict rules of law and based on the absolutely basic knowledge of electrical installations. Detailed instruction in the picture version, included with each set of daily lamps LPQ080 Magneti Marelli makes its installation not complicated and time consuming for the average user of the car.
PRODUCT MADE IN EU
VOLTAGE RANGE: 12/ 24V (CARS, VANS, TRUCKS)
POWER CONSUMPTION 12/24V = 2 x 2W = 4W/ SET
COLOR TEMPERATURE: 6000 K (KELVIN)
LUMINOUS LIGHTS INTENSITY - 220 LM (LUMEN)
EQUIPPED WITH STANDBY SYSTEM
E9 EUROPEAN PRODUCT HOMOLOGATION
MANUFACTURED ACCORDING TO ECE R87 EUROPEAN COMISSIOM REGULATION
DIMENSIONS: 23mm/ 126mm/ 29mm (H/ W/ D)
ALL ACCESSORIES AND MANUAL ASSEMBLY INSTRUCTION AVAILABLE IN EACH BOX
> 1 pcs.