Skid plates

Kompozītmateriāla motora aizsargs MITSUBISHI L 200

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs AL

Skid plate radiator + engine
-6 mm Alu.

Stock: 0 pcs.

Engine protection VW AMAROK

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs AL DODGE RAM

Crankcase protection - front/engine and axle crankcase protection, OPA054ALU.
- For DODGE RAM 1500, 2019-
- Material: aluminum 6 mm thick.
It is installed on cars with an original factory bumper.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase and axle guard is only one part of the OPAK012ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL DODGE RAM

Crankcase protection - gearbox/reducer protection,OPA055ALU.
- For DODGE RAM 1500, 2019-
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The gearbox/reducer protection is only one part of the OPAK012ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER

Aluminum skid plate for VW Amarok 2023 and Ford Ranger 2023
Specifications:
Weight: 24.0 kg
Material: AW5754
Aluminum width: 5 mm
Product compliance: Valid according to UNECE R26/R61
Engine, gearbox and transfer case protection.

Stock: > 1 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 120/125

Set of crankcase protection for Toyota Land Cruiser J120/J125, 2002-2009(long and short base), diesel.
Material - aluminum, 6 mm thick.
The kit consists of:
- front crankcase protection (OPA007ALU).
- transmission protection (OPA008ALU).
- gear cover protection (OPA009ALU).
A set of mounting screws is supplied with the guards, and the installation is carried out in the original mountings on the car frame.

Stock: > 1 pcs.

Kartera aizsargs AL TOYOTA HILUX

Set of crankcase protection for TOYOTA HILUX VIGO, 2005-2011 (for all engine versions).
Material: aluminum 6 mm thick.
The kit consists of:
- engine crankcase protection (OPA010LU).
- gearbox/reducer protection (OPA043ALU).
A set of mounting screws is supplied with the guards, and their assembly involves the use of factory holes and threads in the vehicle frame.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA HILUX

Set of crankcase protection for TOYOTA HILUX VIGO , 2011-2015 (for all engine versions).
Material: aluminum 6 mm thick.
The kit consists of:
- engine crankcase protection (OPA010LU).
- gearbox/reducer protection (OPA028ALU).
A set of mounting screws is supplied with the guards, and their assembly involves the use of factory holes and threads in the vehicle frame.

Stock: > 1 pcs.

Kartera aizsargs AL VW TRANSPORTER T5, T6, T6.1

Crankcase protection - front/protection of the engine, gearbox and reducer, OPA051ALU.
- For VW TRANSPORTER T5, T6, T6.1 (for all engines)
- Material: aluminum 6 mm thick.
It is installed on cars with the original factory bumper.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.

Stock: 0 pcs.

Kartera aizsargs AL NISSAN NAVARA/PATHFINDER

Set of crankcase protection for NISSAN NAVARA (D40) /PATHFINDER (R51), 2005-2010 (before facelift version, for all engines).
Material: aluminum 6 mm thick.
The kit consists of:
- front crankcase protection (OPA064ALU)
- transmission protection (OPA065ALU)
- gear protection (OPA066ALU)
A set of mounting screws is supplied with the guards, and their assembly involves the use of factory holes and threads in the vehicle frame.

Stock: 0 pcs.

Under engine cover aluminium FORD RANGER RAPTOR

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER

Set of crankcase protection for FORD RANGER, 2011-, (for all engine versions).
Material: aluminum 6 mm thick.
The kit consists of:
- engine crankcase protection (OPA041ALU).
- gearbox/reducer protection (OPA042ALU).
A set of mounting screws is supplied with the guards, and their assembly involves the use of factory holes and threads in the vehicle frame.

Stock: 0 pcs.

Kartera aizsargs AL MERCEDES BENZ X-CLASS

Set of crankcase protection for MERCEDES BENZ X-CLASS, 2017-2020 (2.3L engine).
Material: aluminum 6 mm thick.
The kit consists of:
- front crankcase protection (OPA020ALU)
- transmission protection (OPA021ALU)
- gear protection (OPA022ALU)
A set of mounting screws is supplied with the guards, and their assembly involves the use of factory holes and threads in the vehicle frame.

Stock: 0 pcs.

Kartera aizsargs AL VW AMAROK

Set of crankcase protection for Volkswagen Amarok, 2009-(for all engine versions).
Material: aluminum 6 mm thick.
The kit consists of:
- front crankcase protection (OPA023ALU)
- transmission protection (OPA024ALU)
- gear protection (OPA025ALU)
A set of mounting screws is supplied with the guards, and their assembly involves the use of factory holes and threads in the vehicle frame.
Also available (sold separately) is a fuel tank guard (OPA026ALU).

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 95

Set of crankcase protection for Toyota Land Cruiser J95, 1996-2002(long base), diesel.
Material - aluminum, 6 mm thick.
The kit consists of:
- front crankcase protection (OPA013ALU).
- transmission protection (OPA014ALU).
- gear cover protection (OPA015ALU).
A set of mounting screws is supplied with the guards, and the installation is carried out in the original mountings on the car frame.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 95

Set of crankcase protection for Toyota Land Cruiser J95, 1996-2002(long version), for petrol engines.
Material - aluminum, 6 mm thick.
The kit consists of:
- front crankcase protection (OPA013ALU).
- transmission protection (OPA074ALU).
- gear cover protection (OPA075ALU).
A set of mounting screws is supplied with the guards, and the installation is carried out in the original mountings on the car frame.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 90

Set of crankcase protection for Toyota Land Cruiser J90, 1996-2002(lshort base), petrol.
Material - aluminum, 6 mm thick.
The kit consists of:
- front crankcase protection (OPA013ALU).
- transmission protection (OPA074ALU).
- gear cover protection (OPA075ALU).
- reducer cover beam (OP062MET).
A set of mounting screws is supplied with the guards, and the installation is carried out in the original mountings on the car frame.

Stock: 0 pcs.

Kartera aizsargs AL MERCEDES BENZ X-CLASS

Set of crankcase protection for MERCEDES BENZ X-CLASS, 2017-2020 (3.0L engine).
Material: aluminum 6 mm thick.
The kit consists of:
- front crankcase protection (OPA020ALU)
- transmission protection (OPA021ALU)
- gear protection (OPA058ALU)
A set of mounting screws is supplied with the guards, and their assembly involves the use of factory holes and threads in the vehicle frame.

Stock: 0 pcs.

Kartera aizsargs AL MITSUBISHI L200, FIAT FULLBACK

Set of crankcase protection.
Intended for car models (for all engine versions):
- MITSUBISHI L200, 2015-.
- FIAT FULLBACK, 2015-.
Material: aluminum 6 mm thick.
The kit consists of:
- front crankcase protection (OPA047ALU)
- transmission protection (OPA049ALU)
- gear protection (OPA050ALU)
A set of mounting screws is supplied with the guards, and their assembly involves the use of factory holes and threads in the vehicle frame.

Stock: 0 pcs.