Towbars

Tow bar

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Piekabes āķa gals

American towbar with pin, not for bike platform.
- pulling force 3500 kg.
- vertical load 100 kg.

Stock: 0 pcs.

Rezerves daļa piekabes āķim

Locking handle for GDW towbar.

Stock: 0 pcs.

Sakabes āķa automāts

Tow bar.

Stock: 0 pcs.

Rezerves daļa sakabes āķim

Lowering the towbar flange
Sizes:
- height 20.5 cm.
- width 15.5 cm.
- distance between holes: 90 mm x 50 mm.

Stock: > 1 pcs.

Sakabes āķa gals

Removable hook for a towbar from a RANGE ROVER EVOQUE
Car. supplied as an original spare part.

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Piekabes āķa detaļa

Trailer weight: 3500 kg
Ball diameter Ø 50 mm.
The flange is fastened with two screws, with clamp
  equipped with a clamp. You can tow traditional trailers or trailers equipped with a drawbar with a loop.
The clamp provides additional protection against the uncoupling of the trailer.
The mechanism is intended for vans equipped with support beams with two holes It is certified for use in all countries of the European Union.

Stock: > 1 pcs.

Sakabes āķa gals

KL1 2X4
Towbar hook adapter that allows you to change the model of the hook itself on the towbar.
- the distance of fastening the towbar on the base is 45 mm between the bolts.
- Hook attachment distance at the rear horizontally 90, vertically 55 mm.

Stock: > 1 pcs.

Hook tow bar with thread

Stock: 0 pcs.

Piekabes āķa sijas stiprinājumi

Trailer hook beam 2067 fasteners for Iveco Daily Van 7/9/11m² 2014-
Wheel base 3000 + 3520 - 1 wheel.

Stock: 0 pcs.

Piekabes āķa sijas stiprinājumi

Trailer hook beam 2067 fasteners for Iveco Daily Van 7/9/11m² 2014-
Wheel base 3520 - double wheels.

Stock: 0 pcs.

Piekabes āķa detaļa

Traction capacity approved 3.500 kg
Ball joint Ø 50mm.
2-hole fixation:
Center to center 90mm
Ø 25mm axle
D value: 17 kN
S value: 250 kg

Stock: 0 pcs.

Sakabes āķa automāts

Body assembly method:
1. Attach the machine body to the drawbar beam using M12x25mm bolts as shown in the illustration.
Hook installation:
1. To secure the ball, pull the lever down until it stops.
2. Insert the ball into the body so that the pins on the ball fit into the seats in the body.
3. Release the lever. It should return to its original position, which means that the hook mechanism is correctly locked into the body.
4. Insert the cotter pin through the hole in the lever and the hole in the hook shackle.

Stock: 0 pcs.

Piekabes āķa gals ieskrūvējams

Hook for towbar with thread according to customer's special order.
- For American type cars.
- Thread diameter 18 mm.
- The diameter of the hook apple is 60 mm.

Stock: 0 pcs.

Piekabes āķa gals

-hook for the tow bar.
- sizes:
between screws 65mm
apple height 170mm
distance from the middle of the apple to 1 screw 270mm

Stock: > 1 pcs.

Piekabes āķa gals

American towbar with pin, not for bike platform.
- pulling force 3500 kg.
- vertical load 140 kg.

Stock: > 1 pcs.

Pin

Code: E.H. B-C/Z.AH (E.H. B-C -pin and Z.AH-cotter)
Pin allows attachment of any towbar adapter or other accessory to US standard 2” (51x51 mm) or 1 ¼” (32x32 mm) sizes.

The 16mm diameter pin is universal and fits all cars, ATVs, tractors, SUVs or ATVs equipped with a square profile on the rear of the vehicle with dimensions of 2' (51x51mm) or 1 ¼' (32x32mm).

The US towbar pin can be used for a wide range of American standard auto accessories including: US towbar adapters, bike racks, rope winches, snow blowers, sweepers, drywall lifts, road salt spreaders and many more.

Stock: > 1 pcs.