All products

Car radiator decorative cover

Stock: 0 pcs.

Paklāji salonā auduma

Textile floor mats - made from special auto textile material. Good protection from dust and water. Easy to clean and wash. Ads additional sound isolation and makes your interior more elegant and comfortable.

Stock: 0 pcs.

Rear bumper cover TOYOTA AVENSIS

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: 0 pcs.

Safety rope

Safety rope

Stock: > 1 pcs.

Trunk mats SKODA KAROQ

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mats NISSAN LEAF

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Trunk mats LANDROVER RANGE ROVER

Trunk mat - especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mats LANDROVER DISCOVERY

Trunk mat - especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Rear bumper cover VW PASSAT (B8)

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: 0 pcs.

Tow bar CITROEN BERLINGO,OPEL COMBO,PEUGEOT PARTNER/RIFTER,TOYOTA PROACE CITY/CITY Furgon/CITY VERS

Options for electrical installation
- 12500637 - 7 PIN - oriģinal, 09.2018 >
- 21500637 - 13 PIN - oriģinal, 09.2018 >
- 737561 - 7 PIN - oriģinal, 07.2018>
- 747269 - 13 PIN - oriģinal, 07.2018>
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Door stills TOYOTA RAV 4

Stock: > 1 pcs.

Domkrats hidrauliskis

Hydraulic bottle jack low profile
Designed for lifting vehicles with low ground clearance during repair works.
Equipped with a safety valve which prevents exceeding the maximum permissible load.
Equipped with the hydraulic pump drive handle.
Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C.
Has an additional working piston screw (exception – hydraulic bottle jacks with a load capacity 30 and 50 t).
Delivered in individual cardboard box.
Max load (kg) 5000
Nominal load (kg) 3750
Pick up high (mm) 185
Plunger stroke (mm) 110
Screw pitch (mm) 60
Lift high (mm) 355
Package (pcs) 1
Weight: 4.12

Stock: 0 pcs.

Domkrats hidrauliskis

Hydraulic bottle jack low profile
Designed for lifting vehicles with low ground clearance during repair works.
Equipped with a safety valve which prevents exceeding the maximum permissible load.
Equipped with the hydraulic pump drive handle.
Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C.
Has an additional working piston screw (exception – hydraulic bottle jacks with a load capacity 30 and 50 t).
Delivered in individual cardboard box.
Max load (kg) 3000
Nominal load (kg) 2250
Pick up high (mm) 180
Plunger stroke (mm) 110
Screw pitch (mm) 60
Lift high (mm) 350
Package (pcs) 1
Weight: 3.75

Stock: 0 pcs.

Domkrats hidrauliskis

Hydraulic bottle jack low profile
Designed for lifting vehicles with low ground clearance during repair works.
Equipped with a safety valve which prevents exceeding the maximum permissible load.
Equipped with the hydraulic pump drive handle.
Hydraulic jack system is designed for use at an ambient temperature from -20 ° C to + 50 ° C.
Has an additional working piston screw (exception – hydraulic bottle jacks with a load capacity 30 and 50 t).
Delivered in individual cardboard box.
Max load (kg) 10000
Nominal load (kg) 7500
Pick up high (mm) 195
Plunger stroke (mm) 120
Screw pitch (mm) 60
Lift high (mm) 375
Package (pcs) 1
Weight: 5.85

Stock: 0 pcs.

mobīlā telefona turētājs

Magnetic phone holder with sucker

Stock: 0 pcs.

Saules aizsargs

Front glass cover - 130x60 cm - silver, EPE foam
- size 130X60 cm
- color SILVER
-protect the cabin from burnout in the sun and excessive heat.

Stock: > 1 pcs.

Saules aizsargs

Front glass cover.
- size 150X80 cm
- color SILVER
-protect the cabin from burnout in the sun and excessive heat.

Stock: 0 pcs.

Logu plēve

Solar window film 75 x 300 cm, light transmission approx. 30%
Content:
- solar window film
- plastic spatula
- knife

Stock: 0 pcs.

Logu plēve

Solar window film 75 x 300 cm, light transmission approx. 15%
Content:
- solar window film
- plastic spatula
- knife

Stock: > 1 pcs.

Logu plēve

Solar window film 75 x 300 cm, light transmission approx. 60%
Content:
- solar window film
- plastic spatula
- knife

Stock: 0 pcs.