Moto accessories

Motocikla riteņu balansētājs

Balancer for static balancing of motorcycle wheels with a diameter of 10 to 28 inches. Equipped with two cones and a spindle for precise and easy wheel balancing.

For wheels with a diameter of 10 to 28 inches.
Double roller bearings.
Adjustable leveling feet.
Powder-coated steel frame with a carbon steel balance shaft.
Technical data:
Height: 490 mm
Length: 405 mm
Width: 200 mm

Stock: > 1 pcs.

Motocikla pr. riteņa turētājs

G02169 - motorcycle front wheel stand.
The stand is suitable for 99% of motorcycles. The GEKO motorcycle stand is designed for front wheels with a diameter of 17 - 21 inches and a tire width of 90 - 130 mm. It is designed for safe parking and transportation, as well as for winter storage or maintenance of the motorcycle.
Technical parameters of the product:
- Width: 45-49 cm.
- Length: 60 cm.
- Weight: 5.0 kg

Stock: > 1 pcs.

Ķēžu smērviela

K2 OFF-ROAD Chain Grease - is a highly efficient grease designed to lubricate chains and drive sprockets in off-road motorcycles and quads. Thanks to its lubricating and penetrating properties, it penetrates all gaps, protecting the chain and sprockets from premature wear. It can be used in all types of chains, x-ring, o-ring, z-ring, etc.

The biggest advantage of K2 OFF-ROAD chain grease is that after application it remains in a semi-liquid form, leaving a lubricating and protective layer. Mud, sand and other elements of the ground do not stick to this layer, and all contamination is removed with the rotation of the drive set. Thanks to this, it remains clean longer, which reduces friction between the chain and sprockets and significantly extends their service life.

The frequency of chain lubrication depends on the conditions in which the motorcycle is driven (mud, dust, sand, water, rocks, snow).

We recommend lubricating the chain before each off-road trip. However, it is important to remember that the lubricated chain should be free of dirt.

Stock: > 1 pcs.

Motocikla pr. riteņa turētājs

Adjustable according to wheel size. The holder can be installed temporarily or permanently

Stock: > 1 pcs.

Moto rack system

Stock: 0 pcs.

Rampas pagarinājums

AC-023 attaches to the ramp and makes it longer, which makes it possible to load motorcycles up to 3 meters long. Easy to install and will fit all ramp models.

Stock: 0 pcs.

Sniega motocikla adapteris rampai

Ramp adapter for snowmobiles. Designed for low angle of approach. With the AC-006, you can easily load and unload even the largest snowmobiles. It bolts to the existing wheel tray. Height and width can be adjusted.

Stock: 0 pcs.

3-riteņu transporta rampas adapteris

The AC-005 tricycle adapter allows you to transport a three-wheel motor vehicle. This accessory greatly facilitates the loading and unloading of the three-wheeled motor vehicle.

It takes about 15 minutes to remove the stock wheel choke top and install the 3 wheel adapter.

Stock: 0 pcs.

Īsais rampas pagarinājums

This accessory attaches to the main frame of the ramp. It is mainly used for motorcycles with a long wheelbase for loading into buses. This allows the motorcycle to be slid further into the bus so that the rear door can be closed.

Stock: 0 pcs.

Bezskrūvju stiprinājuma komplekts rampai

Using the AC 012 boltless attach kit one can attach the ramp to vehicles without drilling holes in the cargo bed. You can attach / remove the ramp in a matter of minutes.
From a legal point of view, when the ramp is strapped to a vehicle, and not bolted, it is regarded as “payload” in most countries and therefore exempt of many regulations regarding changes made to a vehicle.
From a practical point of view, users can easily detach the ramp from one vehicle and then attach to another, which makes life easier for many motorcycle owners. It makes it also possible to rent the ramp out to people that need transporting motorcycles for either professional or leisure use.

Stock: > 1 pcs.

Platformas iekrāvējs

AC-008 is a ramp adapter for transporting different types of cargo, pallets, lawnmowers, snowmobiles, barrels, etc. The size of the loading platform is 2m x 1m. The loading platform floor can be adapted to the dimensions of your vehicle. The main thing is that the weight of the transported cargo does not exceed 550 kg.
The ramp is complete with an access ramp that lowers for easy loading. It folds up during transport so that your license plate is visible. Includes 8 attachment hooks for strap attachment.

Stock: > 1 pcs.

Rampas adapteris

Designed for long bed trucks, the AC 004 tailgate adapter lets you close the tailgate after loading your motorcycle. It clips on to the main frame of the ramp without tools. It lets you slide the motorcycle over the tailgate to load and off-load it.
Very handy if you want to drive with your tailgate closed.

Stock: > 1 pcs.

Noņemams rampas pagarinājums

The AC 001 clips on to the tilt frame, making it longer.
It uses a pair of quick-release brackets and it will boost your load height considerably. Standard AUN 200 ramps will lift motorcycles up to 90cm height. However using this extender, users can lift motorcycles up to 1,3 meters or even higher.
AC 001 is compatible with other accessories such as AC 008 (cargo loader) or AC 006 (snowmobile adapter). It is used by clients with higher than normal trucks, or for clients with adventure trucks etc.
It is also very useful for clients having long exhaust pipes that otherwise risk to scrape the ground during loading and off-loading.

Stock: > 1 pcs.

Salokamā moto rampa

The AUN-200F-K folding ramp is a versatile loading, unloading and transportation solution for motorcycle transport and cargo.

Key Features:
- Motorcycle lift and cargo platform. The ramp effortlessly lifts any moto equipment and cargo (the weight of which does not exceed 550 kg).
- Made of high class alloy. Metal parts are galvanized and powder coated for long-lasting performance.
- The ramp is adaptable to any car, as it can be cut or extended. Load or unload your motorcycle or cargo quickly and easily with the help of a cordless screwdriver. The battery tool has a recommended torque of 60 Nm, providing efficient performance with 18 or 24 V professional tools.
- Available accessories - The ramp can be equipped with various accessories to increase the loading / unloading height or reduce the loading / unloading angles.

1. AC-001 Ramp extension gives the possibility to load any type of motorcycle equipment or cargo up to 1.5 meters.
2. AC-003 Used for motorcycles with a long wheelbase for loading into buses. This allows the motorcycle to be slid further into the bus so that the rear door can be closed.
3. AC-004 Adapter allows you to close the tailgate of the pickup truck after loading the motorcycle.
4. AC-005 Adapter allows to transport three-wheeled motor transport.
5. AC-006 Adapter for snowmobiles.
6. AC-008 Adapter to be able to load, unload and transport different types of cargo, pallets, lawnmowers, barrels, etc.
7. AC-012 Screwless mounting kit. Possibility to fix the ramp without screwing it to the car body. Allows you to use the same ramp on all your cars.
8. AC-023 Adapter allows loading motorcycles up to 3 meters long.

Stock: 0 pcs.

Izjaucamā moto rampa

The AUN-250S-K ramp, which can be easily and quickly disassembled and reassembled, is a versatile loading, unloading and transportation solution for motorcycle transport and cargo.

Key Features:
- Motorcycle lift and cargo platform. The ramp effortlessly lifts any moto equipment and cargo (the weight of which does not exceed 550 kg).
- Made of high class alloy. Metal parts are galvanized and powder coated for long-lasting performance.
- The ramp is adaptable to any car, as it can be cut or extended. Load or unload your motorcycle or cargo quickly and easily with the help of a cordless screwdriver. The battery tool has a recommended torque of 60 Nm, providing efficient performance with 18 or 24 V professional tools.
- Available accessories - The ramp can be equipped with various accessories to increase the loading / unloading height or reduce the loading / unloading angles.

1. AC-001 Ramp extension gives the possibility to load any type of motorcycle equipment or cargo up to 1.5 meters.
2. AC-003 Used for motorcycles with a long wheelbase for loading into buses. This allows the motorcycle to be slid further into the bus so that the rear door can be closed.
3. AC-004 Adapter allows you to close the tailgate of the pickup truck after loading the motorcycle.
4. AC-005 Adapter allows to transport three-wheeled motor transport.
5. AC-006 Adapter for snowmobiles.
6. AC-008 Adapter to be able to load, unload and transport different types of cargo, pallets, lawnmowers, barrels, etc.
7. AC-012 Screwless mounting kit. Possibility to fix the ramp without screwing it to the car body. Allows you to use the same ramp on all your cars.
8. AC-023 Adapter allows loading motorcycles up to 3 meters long.

Stock: 0 pcs.

Moto rampa

The AUN-200 ramp is a versatile loading, unloading and transportation solution for motorcycle transport and cargo.

Key Features:
- Motorcycle lift and cargo platform. The ramp effortlessly lifts any moto equipment and cargo (the weight of which does not exceed 550 kg).
- Made of high class alloy. Metal parts are galvanized and powder coated for long-lasting performance.
- The ramp is adaptable to any car, as it can be cut or extended. Load or unload your motorcycle or cargo quickly and easily with the help of a cordless screwdriver. The battery tool has a recommended torque of 60 Nm, providing efficient performance with 18 or 24 V professional tools.
- Available accessories - The ramp can be equipped with various accessories to increase the loading / unloading height or reduce the loading / unloading angles.

1. AC-001 Ramp extension gives the possibility to load any type of motorcycle equipment or cargo up to 1.5 meters.
2. AC-003 Used for motorcycles with a long wheelbase for loading into buses. This allows the motorcycle to be slid further into the bus so that the rear door can be closed.
3. AC-004 Adapter allows you to close the tailgate of the pickup truck after loading the motorcycle.
4. AC-005 Adapter allows to transport three-wheeled motor transport.
5. AC-006 Adapter for snowmobiles.
6. AC-008 Adapter to be able to load, unload and transport different types of cargo, pallets, lawnmowers, barrels, etc.
7. AC-012 Screwless mounting kit. Possibility to fix the ramp without screwing it to the car body. Allows you to use the same ramp on all your cars.
8. AC-023 Adapter allows loading motorcycles up to 3 meters long.

Stock: > 1 pcs.

Motorcycle mobile phone holder

Holder for a mobile phone on the handlebars of a motorcycle Gold Wing DCT.

Stock: 0 pcs.

Elkoņu balsti

Motorcycle passenger armrests.
Suitable for 2018-2020 Honda Gold Wing motorcycles.
Armrests provide passenger comfort during long journeys.
Thanks to the possibility of folding, it is enough to fold them up to make it easier for the passenger to get on and off the motorcycle.
- Durable aluminum and cast steel construction with soft padding.
- Armrest dimensions: length 17 cm, width 6 cm, thickness 3.8 cm.
- Installation is made in place of the original holes, fastening with bolts, drilling is not required.

Stock: 0 pcs.

Numura rāmis mopēdam

Moped, scooter license plate frame.
-for Latvian type license plates.
- Dimensions: 177 x 130 mm

Stock: > 1 pcs.

Numura rāmis mopēdam

Moped, scooter license plate frame.
- for Latvian type license plates.
- Dimensions: 177 x 130 mm

Stock: > 1 pcs.