Winches

Vinča

K4500XP 12V Winch – Synthetic Rope – 191:1 Gear Ratio – IP68 Rated
Key advantages:
Highly sealed motor with exceptionally low power consumption
Resettable overload circuit breaker – protects the motor during voltage drops
3-stage planetary gear system made of steel
Forged steel drum designed to withstand use with synthetic ropes
Clutch lever operable in all conditions, even while wearing thick gloves
Dynamic brake capable of holding 100% of the load
Wired remote control and handlebar-mounted switch included
The Kangaroo Winch XP series is a product line designed for ATVs. The Kangaroo Winch XP excels in challenging, swampy, and steep terrain, boasting an IP68 waterproof rating. With a 2,041 kg (4,500 lb) pulling capacity and a sealed, low-draw motor, it is perfectly suited for quads, ATVs, and UTVs.
Three reasons why the Kangaroo Winch XP is the best choice:
1. Reliable motor – The motor drives everything, and the difference is obvious to the naked eye. The Kangaroo Winch XP ATV series rotor features thicker copper windings, resulting in greater efficiency converted into higher torque. Rotating on sealed cartridge bearings, the Kangaroo Winch XP is an industry-leading powerhouse.
2. Reliable gearbox – Size matters. See how much thicker our gears are compared to the competition! Wider gears ensure better meshing, resulting in more efficient power transmission and a longer service life.
3. Reliable protection – High-quality sealing prevents the ingress of water, dirt, and dust, while the included thermal circuit breaker protects your equipment against electrical overloads. The electrical cables for this winch are manufactured according to strict Kangaroo Winch guidelines.
A wireless remote control kit is available for purchase separately.
Line pull: 2,041 kg
Motor: Sealed permanent magnet, 3.7 HP
Voltage: 12V
Gear train: 3-stage planetary
Gear ratio: 191:1
Solenoid: Sealed integrated unit
Brake: 100% automatic
Rope: Synthetic, 6.5 mm x 16.5 m
Fairlead: Aluminum hawse
Controls: 3 m wired remote and handlebar-mounted switch
Dimensions: 387 mm x 115 mm x 123 mm
Drum dimensions: 50.8 mm x 124.5 mm
Mounting bolt pattern: 76 mm x 168 mm
Weight: 13 kg
Current draw: 32 A – 230 A
Line retrieval speed: 1.7 – 4.6 m/min

Stock: 0 pcs.

Vinčas platforma

Winch mount Toyota Hilux Travo 2016+

Stock: 0 pcs.

Vinčas platforma

Toyota Hilux Gen. IX Travo 2026 – HD winch mounting plate
Part number: WMHilux2026-hd.
Allows for the secure mounting of a winch (up to 13,000 lbs) entirely behind the factory bumper.
Toyota Hilux Travo Gen. IX 2026 – HD mounting plate for winches up to 13,000 lbs, designed for installation behind the original factory bumper. Installation requires no welding or drilling, it bolts directly into existing factory frame holes. Accommodates winches with a maximum height of 173 mm.
Constructed from 6 mm structural steel plate. Shot-blasted and powder-coated using a dual-layer textured finish. Features a cutout beneath the drum to facilitate the removal of debris from the winding rope. Weight: approx. 14.9 kg.
Product is not homologated (not road-legal).
Product details
Part number: WMHilux2026-hd
Description
Make: Toyota | Model: Hilux IX Travo 2026– | Year of production: 2026– | Engine: 2.8d, 2.8d-Hybrid, 2.4d, 2.7

Stock: > 1 pcs.

Vinčas stiprinājuma sistēma Volkswagen Amarok 2009–2016

Pick-up winch mount system for Volkswagen Amarok 2009–2016, designed for safe installation of a winch in the vehicle’s pick-up bed or body structure.
This solution allows the vehicle to be equipped with a winch while maintaining a practical and secure mounting point for daily work, off-road use, or professional applications.
The construction is made from durable steel and finished with a powder coating, helping to protect the part against corrosion, moisture, and different weather conditions.
The mounting system is designed specifically for Volkswagen Amarok, ensuring precise installation and good compatibility with the vehicle structure.
Before purchase, it is recommended to check the dimensions and mounting points of the selected winch for compatibility with this system.
Product fits Volkswagen Amarok 2009–2016 models.

Stock: 0 pcs.

Vinčas stiprinājuma sija Ford Ranger PHEV 2023+

Winch mount beam for Ford Ranger PHEV 2023+, designed for safe installation of a recovery winch inside the vehicle’s truck bed.
This solution is specially developed for the Ford Ranger PHEV, where standard under-bed winch mounting is not suitable due to the hybrid battery layout. The beam mounts directly to the inner rails of the truck bed, avoiding contact with the high-voltage battery area.
The construction is made from strong, heavy-gauge steel and finished with a durable matte black powder coating, providing protection against corrosion, weather conditions, and off-road use.
The system is designed and tested for use with the WARN VR 25-S winch with synthetic rope. When using a winch from another manufacturer, the winch dimensions and bolt pattern must be checked before purchase.
The set includes the winch mount beam, mounting hardware, and step-by-step installation instructions.
The LOW version is suitable for vehicles with roller shutters.
Product fits Ford Ranger PHEV 2023+ models, as well as Ford Ranger 2023+ models with internal combustion engines.

Stock: 0 pcs.

Kinetiskā trose

PLNK14X8 code
Kinetic rope PLNK14X10 , reinforced loops on both sides.
Dimensions: 14 mm x 10 m.
Minimum breaking load: 4000 kg.
Material: polyamide.
Benefits:
- extensibility at maximum load: up to 30%,
- reducing the impact on vehicle components,
- the possibility of a dynamic break,
- convenience when towing in confined spaces,
- resistance to chemicals and ultraviolet radiation,
- professional hand weaving.

Stock: > 1 pcs.

vinčas ruļļu bloks

Roller fairlead Powerwinch - universal
This 4-way roller fairlead guides your wire rope onto the drum and protects it by reducing friction and excessive wear on winch cables or wire ropes, especially during high angle pulls. It is easy to install and works with all standard winch plates.

Mounting bolts pattern 190 mm
Material Galvanized steel
Weight 4 kg

Stock: 0 pcs.

Spirālkabelis

Spiral cable 25 mm², black, spiral length 4.0 m

Stock: 0 pcs.

24 volt winch relay kit with remote control.

Stock: 0 pcs.

The 15” J-type towing hook with round eye is a professional recovery accessory for tow trucks, car carriers and roadside assistance vehicles.
Manufactured from high-strength steel, it is designed for demanding working conditions.
The Working Load Limit (WLL): 5400 lbs / 2450 kg provides a high safety margin during towing and vehicle transport operations.
The J-hook design allows fast and secure attachment to vehicle frames, axles or suspension components.
The round eye hole is compatible with towing chains, recovery chains and securing systems.
Ideal for:
-towing passenger cars and light commercial vehicles
-transporting damaged or accident vehicles
-professional roadside assistance and recovery
flatbed trucks and car carriers

Stock: > 1 pcs.

The 15” J-type towing hook with oval eye is a professional recovery accessory for tow trucks, car carriers and roadside assistance vehicles.
Manufactured from high-strength steel, it is designed for demanding working conditions.
The Working Load Limit (WLL): 5400 lbs / 2450 kg provides a high safety margin during towing and vehicle transport operations.
The J-hook design allows fast and secure attachment to vehicle frames, axles or suspension components.
The oval eye hole is compatible with towing chains, recovery chains and securing systems.
Ideal for:
-towing passenger cars and light commercial vehicles
-transporting damaged or accident vehicles
-professional roadside assistance and recovery
flatbed trucks and car carriers

Stock: > 1 pcs.

vinčas apvalks

Darba cimdi “Pūķa ragana”, kas paredzēti roku aizsardzībai, strādājot ar vinču. Pastiprināta konstrukcija.
- XL izmērs.

Stock: > 1 pcs.

vinčas apvalks

Stock: > 1 pcs.

vinčas apvalks

Stock: > 1 pcs.

vinčas apvalks

TRUCK DRAGON WINCH winch cover
-40 cm x 18 cm

Stock: > 1 pcs.

Vinčas platforma

Nissan Navara D23 NP300 2015- winch mounting plate under the original bumper. Installation requires no welding or drilling. Made from 6 mm thick structural steel plate. Shot- blasted and powder-coated black with textured double layer technology. Weight approx. 14.9 kg.

Stock: 0 pcs.

Vinčas trose

Synthetic winch rope, 10 mm.
- Gray
- MBL (tensile strength): 10.5 T
- Size: 10 mm x 28 m, set of 2.
Powerline synthetic ropes are extremely tear-resistant and exhibit very little stretch. Their extremely long service life, good wear resistance, very low weight, high UV resistance, flexibility, and splicability make this type of rope indispensable in many different applications. Powerline ropes are an ideal replacement for steel ropes.

Stock: 0 pcs.

Kinetic rope

Stock: > 1 pcs.

Tālvadības pults

PWM8_42 — remote control.
- Compatible with PW12000/13000 winches.
- Voltage: 12 V
- Cable length: 4.5 m.

Stock: > 1 pcs.

Vinčas troses ierobežotājs

Rubber winch cable tension limiter.
This limiter protects the guide and hook from pinching and damage.
The limiter ensures proper winch cable tension by stabilizing the hook on the guide.
The limiter also prevents the cable from tangling on the drum and removes thick layers of dirt.
Its simple spiral design allows for quick installation on the winch cable.
Suitable for synthetic cables up to 12 mm thick.

Stock: > 1 pcs.