Aizmugures bampera uzlika MERCEDES BENZ M-klasse(W164)
4710093 - Rear bumper trim.
- For Mercedes M-Class (W164) 2005-2011,
- Made of stainless steel (glossy finish),
- Dimensions: 89.3 / 11 cm,
- Easy installation - fixed with double-sided adhesive tape, which is located on all four edges of the bumper trim.
Stock:
0 pcs.
|
|
|
|
|
moldings
Car styling strip - 8 M,
- 6 x 3 mm
The flexible decorative strip chrome is weatherproof. Its assembly is very simple. The decorative strip has a strong double-sided adhesive tape on the underside. Decorative tape has a wide range of applications, such as: car interior decoration - on the dashboard, car exterior decoration - on bumpers and doors, yacht decoration, caravan decoration, home interior decoration. Dimensions: Width: 6 mm. Length: 5m.
Facility: Thoroughly clean the surface, removing oil and grease residues. Apply the tape to the bodywork and mark the position. Cut the decorative strip to the desired dimensions (leave about 1 cm margin). Remove the protective double-sided tape and stick the tape along the marked line. Press the strip with your fingers along its entire length. Attention. Install the decorative strip when the air temperature is above 18°C. Avoid washing the car in an automatic car wash for several hours after installation.
Stock:
> 1 pcs.
|
|
|
|
|
moldings
Car styling strip - 5 M,
- 40 X 4 MM
The flexible decorative strip chrome is weatherproof. Its assembly is very simple. The decorative strip has a strong double-sided adhesive tape on the underside. Decorative tape has a wide range of applications, such as: car interior decoration - on the dashboard, car exterior decoration - on bumpers and doors, yacht decoration, caravan decoration, home interior decoration. Dimensions: Width: 40 mm. Length: 5m.
Facility: Thoroughly clean the surface, removing oil and grease residues. Apply the tape to the bodywork and mark the position. Cut the decorative strip to the desired dimensions (leave about 1 cm margin). Remove the protective double-sided tape and stick the tape along the marked line. Press the strip with your fingers along its entire length. Attention. Install the decorative strip when the air temperature is above 18°C. Avoid washing the car in an automatic car wash for several hours after installation.
Stock:
> 1 pcs.
|
|
|
|
|
moldings
Car styling strip - 5 M,
- 26 X 5 MM
The flexible decorative strip chrome is weatherproof. Its assembly is very simple. The decorative strip has a strong double-sided adhesive tape on the underside. Decorative tape has a wide range of applications, such as: car interior decoration - on the dashboard, car exterior decoration - on bumpers and doors, yacht decoration, caravan decoration, home interior decoration. Dimensions: Width: 26 mm. Length: 5m.
Facility: Thoroughly clean the surface, removing oil and grease residues. Apply the tape to the bodywork and mark the position. Cut the decorative strip to the desired dimensions (leave about 1 cm margin). Remove the protective double-sided tape and stick the tape along the marked line. Press the strip with your fingers along its entire length. Attention. Install the decorative strip when the air temperature is above 18°C. Avoid washing the car in an automatic car wash for several hours after installation.
Stock:
> 1 pcs.
|
|
|
|
|
Aizmugures bampera uzlika RENAULT MASTER
Stainless steel rear bumper cover for Renault Master 2024 model year. Ideal for loading or unloading cargo, as it protects the bumper surface from mechanical damage.
Technical data:
- Material: AISI 304L,
- The product complies with the requirements of UNECE R26/R61 legislation,
- Installation does not require any changes to the car door structure (no holes are made in the bodywork).
Stock:
> 1 pcs.
|
|
|
|
|
Numura rāmis
License plate frame, gold metallic color.
The frame allows you to securely fix the license plate and protects it from loss.
It has mounting holes, thanks to which it is not necessary to drill the car body.
In addition, the frame is equipped with a latch that will protect the license plate from falling out.
The frame is made of high-quality material, resistant to harmful weather conditions and scratches.
Designed for installation in cars with single-row number plates.
Dimensions:
- width: 53 cm
- height: 13 cm
Stock:
> 1 pcs.
|
|
|
|
|
Aizmugures bampera uzlika VW GOLF VII
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.
 |
|
|
|
|
Aizmugures bampera uzlika OPEL CROSSLAND
Rear bumper cover.
Do you often load shopping, luggage, construction materials, or travel with your dog?
The Avisa Rear Bumper Cover is the perfect solution for your vehicle as it offers both protective functionality and a great decorative appearance. Resistant to weather conditions (temperature -40 ° C / + 50 ° C) and visits to car washes (moisture).
- Cover to protect the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
- Ability to cover a damaged item (if the rear bumper is broken or damaged).
- Protection from external factors (moisture, road salt, frequent visits to car washes, car detergents, etc.).
- Gives the car an exclusive character and unique appearance.
- This is not your typical chrome trim because it is made of polished stainless steel. Thanks to cleaning, its surface perfectly scales between strong chrome and a deep matte layer.
- A special feature of the trim is that it also protects the edge of the bumper by means of a bend specially profiled for this purpose.
- Attached using double-sided tape, which is located along all four edges of the lining.
Attention! Stick the product carefully, as after a one-time installation it will be impossible to improve the installation.
Package Included:
- car bumper cover,
- assembly instructions “Step by step”,
- 3M degreasing material,
- tube of Autosol (5 ml) - polishing and renewing stainless steel, which provides the steel surface with a long-lasting shine without scratches and a durable protective layer.
Stock:
0 pcs.
 |
|
|
|
|
Aizmugures bampera uzlika MITSUBISHI OUTLANDER
Rear bumper cover.
The STRONG EDITION rear bumper cover is the perfect combination of high quality thick stainless steel with original design. Manufactured from 0.8mm thick steel that is durable and resistant to bending. The decorative element in the form of ribs embedded in the base plate in ribbed grooves attracts attention with its unique design. They are made of EPAMOULD thermoplastic polyurethane, characterized by high resistance to deformation and above average durability.
STRONG EDITION rubbers have been tested for many months, resulting in a product improved in every way.
Stock:
0 pcs.
|
|
|
|
|
Durvju rāmja uzlikas TOYOTA YARIS/ YARIS CROSS
Door frame inserts
- TOYOTA YARIS CROSS 2021-
- TOYOTA YARIS 2020-
Stock:
0 pcs.
|
|
|
|
|
Sānu moldingi (universāli)
Side moldings reliably protect your car from 'anonymous' scratches or dents in parking lots
They have a protective and decorative function. ...
Made from polyurethane molded technology.
Perfectly tailored to the door and fits onto the tape on the 3M market.
It's no secret that many modern cars are not equipped with side moldings from the factory, for design reasons in the first place. However, the realities of life make car owners think about purchasing protective rubber moldings, since only with the help of them it is possible to protect the paintwork of your favorite car from damage in a narrow parking lot. Also, a properly selected molding has a decorative function, giving your car a personality.
Moldings are made of polyurethane, this material has stable properties in a wide temperature range, it will not melt in the sun and lose its shape, and it will not crack in frost.
Moldings are glued to the 3M double-sided tape that comes with the kit. There is nothing difficult in the installation, almost every car owner will be able to install protective moldings on the door, you just need to carefully mark the door and be sure to degrease the gluing site.
The product is universal, suitable for many car brands and models.
Stock:
> 1 pcs.
 |
|
|
|
|
Durvju rāmja uzlikas NISSAN QASHQAI
Door stills
Stock:
0 pcs.
|
|
|
|
|
Durvju rāmja uzlikas Skoda Octavia
Door stills Skoda Octavia III 2013-2019
Stock:
0 pcs.
|
|
|
|
|
Aizmugures bampera uzlika VW TIGUAN
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
> 1 pcs.
 |
|
|
|
|
Aizmugures bampera uzlika SUBARU OUTBACK
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.
 |
|
|
|
|
Aizmugures bampera uzlika SKODA KODIAQ
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
> 1 pcs.
 |
|
|
|
|
Rear bumper cover VW GOLF VIII
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.
 |
|
|
|
|
Numura rāmis
The frame of the license plate:
-from stainless steel
- two types of finish: polished steel or polished to a mirror finish (optional)
-saves high quality for many years
- frame with double license plate fixation
Stock:
> 1 pcs.
|
|
|
|
|
Door stills SKODA KODIAQ
Stock:
0 pcs.
|
|
|
|
|
Aizmugures bampera uzlika BMW X3
Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Stock:
0 pcs.
 |
|
|
|
|
