Instruments

Portable lamp

Designed to protect from mechanical damages and scratches. Creates an upcoming air streams f

Stock: > 1 pcs.

Tool kit

Stock: > 1 pcs.

riepu spiediena mērītājs

Tyre pressure gauge.
- 7,5 BAR.
- Metal.

Stock: > 1 pcs.

L-veida seškanšu atslēgu kompl.

L-type ball end hex wrench set
Set is equipped with ball hex keys placed on a plastic holder.
Individual packaging - a blister.
Number of items - 8
Kitting - 3,0, 4,0, 5,0, 6,0, 7,0, 8,0, 10,0, 12,0 мм

Stock: 0 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.

Rokas pumpis

Hand pump

Stock: > 1 pcs.

Tool kit

Stock: 0 pcs.

Krusta ratatslēga

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers).
It has standart hex working profile.
Rods are made by resistance welding and reinforced with the steel riveted pad.
Reduced arm length and wrench rod diameter.
Protected against corrosion by synthetic polymer coating.

Stock: 0 pcs.

accumulator tester

Stock: > 1 pcs.

Side cutters

>Made by hot stamping (forging hammers)
>Material – chrome-vanadium tool steel 50CRV
>Hardened to hardness 41-46 HRC
>Cutting edges are induction hardened to 55-58 HRC
>Equipped with comfortable ergonomic two-component handles
>Protected from corrosion by phosphatizing with additional grinding

Stock: > 1 pcs.

Skrūvgriežu komplekts

Precision screwdriver set 25 pcs.
In the set:
- 24 spare bits.
- Profiled, comfortable handle, length 8.9 cm.
Made of high quality materials, packed in a durable zippered case.

Stock: > 1 pcs.

Krusta ratatslēga

Cross ratchet 17x19x21x23

Stock: > 1 pcs.

Tool kit

Stock: 0 pcs.

Tool kit

Accessory with decorative and practical effect for door, side window element. Designed to im

Stock: 0 pcs.

Oil changing pan

Stock: > 1 pcs.

Oil filter wrench jaw type

Stock: > 1 pcs.

Clip removal tool kit

Tool set for removing car upholstery fastening clips, 4 pcs.
- Lever with cutouts at both ends: 220x20mm.
- Lever with cutouts at both ends: 185 x 20 mm.
- Lever with both blunt ends: 140x20 mm.
- Spoon lever: 160x22 mm.
- Material: hardened nylon, does not scratch or damage the upholstery.

Stock: > 1 pcs.

Āmurs

Safety hammer with hanger.
Hammer and safety knife in one.
A very useful and indispensable device in case of a collision or accident.
In modern cars, belt tensioners are triggered on impact, sometimes it is impossible to unfasten them. Thanks to this device, we can easily break the glass when the door is jammed or cut the seat belt, even if we have a limited range of motion.
Dimensions:
- total height approx. 17.5 cm
- width max. at the top about 7cm

Stock: > 1 pcs.

Sprūdatslēga ar kvadrātu

>Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
>Equipped with a flag switch, a quick-reset button and a holding ball.
>Material - chrome-vanadium steel CrV50BV30.
>It is hardened to hardness not less than 39HRC.
>It is chrome plated and matt finish to resist corrosion.

Stock: 0 pcs.

Uzsitējveseris

The head of sledgehammer is made from tool steel using hot forging (drop-hammers forging).
It is heat treated and phosphate plated to resist corrosion.
Sledgehammer handle is made from fibreglass.
It has high mechanical strength, water and heat resistance.
Equipped with rubber pads for softening the impact and easy gripping.

Stock: 0 pcs.