Instruments

Kombinēta atslēga

Spanner is made by the hot stamping method (forging hammers).
Has a standard open end profile and 12 point box end profile.
Material – chrome-vanadium tool steel CRV6150.
Protected from corrosion by chrome coating with matt surface effect.

Stock: 0 pcs.

Kompresors

AIR COMRESSOR
-250psi
-constant working time 10 minutes.
-constant working time if the pressure is more than 5 bar - 5 minutes.
Pause 10 minutes.
Not intended for pumping wheels of agricultural machinery.
Power supply 12 and 220 volts.

Stock: 0 pcs.

Krusta ratatslēga

Cross ratchet 17x19x21x23

Stock: > 1 pcs.

Krusta ratatslēga

Made of the chrome-vanadium tool steel by the hot stamping method (forging hammers).
It has standart hex working profile.
Rods are made by resistance welding and reinforced with the steel riveted pad.
Reduced arm length and wrench rod diameter.
Protected against corrosion by synthetic polymer coating.

Stock: 0 pcs.

Uzsitējveseris

The head of sledgehammer is made from tool steel using hot forging (drop-hammers forging).
It is heat treated and phosphate plated to resist corrosion.
Sledgehammer handle is made from fibreglass.
It has high mechanical strength, water and heat resistance.
Equipped with rubber pads for softening the impact and easy gripping.

Stock: 0 pcs.

Uzsitējveseris

The head of sledgehammer is made from tool steel using hot forging (drop-hammers forging).
It is heat treated and phosphate plated to resist corrosion.
Sledgehammer handle is made from fibreglass.
It has high mechanical strength, water and heat resistance.
Equipped with rubber pads for softening the impact and easy gripping.

Stock: 0 pcs.

Atslēdznieka āmurs

HAMMER WITH A WOODEN HANDLE
Hammer head is made of 45 steel by the hot stamping method (forging hammers).
Hardness of the impact part - 45-45 HRC.
Square-shaped hammer head with flat and pointed impact parts.
Handle of the hammer is made of wood and covered with protective varnish.
Hammer head is protected from corrosion by chemical oxidation.

Stock: 0 pcs.

Steel wire brush

Stock: 0 pcs.

Salona paneļu nocēlāju komplekts

Применяется при проведении арматурных работ при покраске автомобиля и при ремонте элементов декора салона автомобилей.
Применим для снятия панели приборов, центральной консоли, демонтажа аудиосистем, элементов обшивки салона и декоративных молдингов.
Набор состоит из 11 съёмников-лопаток различной конструкции.
Blades are made of high quality plastic.
Лопатки размещены в качественной тетроновой сумке, поставляются в картонной коробке.

Stock: 0 pcs.

Instrumentu komplekts

Universal set is optimized for use both in the car and in the garage.
All tools are made from chrome vanadium tool steel, tempered to hardness 39 HRC and are crome plated to resist corrosion.
Set meets requirements of Russian GOST and European DIN.
6-point sockets are made by of cold stamping .
Set includes wrenches and sockets with 1/4 'and 1/2' square drive.

Stock: 0 pcs.

Instrumentu komplekts

A set of heads.
Sockets are made by cold stamping.
6-point sockets are made by cold stamping.
Hardness at least 39 HRC.
Covering — chrome with matting effect.
Packaging - plastic case.

Stock: 0 pcs.

Instrumentu komplekts

6-point sockets.
Manufactured by cold stamping.
Hardness at least 39 HRC.
Chrome protective and decorative coating with matt surface effect .
Has 1/4'(6.3 mm) square drive.
Heads.
-4, 4.5, 5, 5.5, 6, 7, 8, 9,10,11,12,13,14 mm.
Set is packed in a plastic case.

Stock: 0 pcs.

Kombinētā atslēga komplekts

Set includes 12 combination wrenches packed in a durable tetron bag.
Wrenches are made of CRV6150 chrome-containing steel by hot stamping (forging hammers).
Wrench heads are hardened to 39-41 HRC.
Wrenches are protected against corrosion by matt chromium plating.

Stock: 0 pcs.

Kombinētā atslēga komplekts

Set includes 12 combination wrenches placed on a durable plastic holder.
Wrenches are made of CRV6150 chrome-containing steel by hot stamping (forging hammers).
Wrench heads are hardened to 39-41 HRC.
Wrenches are protected against corrosion by chromium plating with matt surface effect.
Set includes wrenches 6, 7, 8, 10, 11, 12, 13, 14, 15, 17, 19, 22 mm.

Stock: 0 pcs.

Kombinētā atslēga komplekts

Wrenches are made of CRV6150 chrome-containing steel by hot stamping (forging hammers).
Wrench heads are hardened to 39-41 HRC.
Wrenches have a standard open end part.
Wrenches are protected against corrosion by matt chromium plating.
Set includes wrenches 6,8,10,12,13,14,17,19 mm.

Stock: > 1 pcs.

Kombinētā atslēga komplekts

Combination key set.
Set includes 6 combination wrenches placed on a durable plastic holder.
Wrenches are made of CRV6150 chrome-containing steel by hot stamping (forging hammers).
Wrench heads are hardened to 39-41 HRC.
profile of OVER DRIVE, which is perfectly adapted for work with undamaged fasteners.
Wrenches are protected against corrosion by matt chromium plating.
Set includes wrenches 8,10,12,13,14,17 mm.

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: > 1 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.