Skid plates

Kartera aizsargs AL TOYOTA LAND CRUISER 100, LEXUS LX470

Crankcase protection - gearbox/reducer protection, OPA095ALU.
-TOYOTA LAND CRUISER 100, LEXUS LX470, 1998-2007 (petrol engines)
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK027ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Under engine cover aluminium FORD RANGER 2023-/VW AMAROK 2023-

Crankcase protection AL- 5mm.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA HILUX

Crankcase protection - engine and axle crankcase protection, OPA010ALU.
- For TOYOTA HILUX VIGO, 2005-2015 (for all engine versions).
- Material: aluminum 6 mm thick.
Installed on cars with original factory bumper.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK002ALU/OPAK014ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 120

Crankcase protection - engine crankcase protection, OPA027ALU.
- For Toyota Land Cruiser J120/J125, 2002-2009 (long and short base).
- Material: aluminum 6 mm thick.
It is installed on cars with Z001 bumper, cars with original factory bumper require OPA007ALU crankcase protection.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK001ALU-A kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER

Crankcase protection for FORD RANGER(T6/T7), 2011- (for all engine versions).
Designed to protect the engine crankcase and axle.
Designed for installation on cars under the original factory bumper.
Mounting screws are supplied in the kit to use the factory holes and threads on the vehicle frame when assembling.
The front crankcase and axle guard OPA041ALU is only one part of the crankcase guard kit OPAK011ALU but can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL VW TRANSPORTER T5, T6, T6.1

Crankcase protection - rear axle protection protection, OPA052ALU.
- For VW TRANSPORTER T5, T6, T6.1 (4Motion version)
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs SUBARU FORESTER

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs AL MERCEDES BENZ VITO/V-klasse (W447)

Mercedes-Benz V-Klasse / Vito
-designed for 4x4 models
Under engine cover aluminium
Weightt: 19,5kg
Time of mounting: 60min

Stock: > 1 pcs.

Kartera aizsargs AL Dodge RAM

Crankcase protection 804161.
- DODGE RAM, 2019- (all models).
- Protection of the transfer case and gearbox.
- Material: aluminum 5 mm thick.
All items required for installation are included in the kit.

Stock: > 1 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 200

Crankcase protection for Toyota Land Cruiser J200, 2007- , diesel.
Designed to protect the fuel tank.
Material: aluminum 6 mm thick.
Mounting screws are supplied in the kit to use the factory holes and threads on the vehicle frame when assembling.

Stock: 0 pcs.

Engine protection TOYOTA HI-LUX

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 100, LEXUS LX470

Crankcase protection - gearbox/reducer protection, OPA096ALU.
-TOYOTA LAND CRUISER 100, LEXUS LX470, 1998-2007 (diesel engines)
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the OPAK028ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Under engine cover CITROEN JUMPER,FIAT DUCATO,PEUGEOT BOXER

Quickly demountable tow bar - removable vertically. Fast and comfortable detachment with met

Stock: 0 pcs.

Under engine cover aluminium MERCEDES BENZ VITO/V-klasse (W447)

Under engine cover aluminium 5 MM

Stock: 0 pcs.

Kartera aizsargs AL 5mm MAN TGE,VW CRAFTER

Under engine cover 5mm aluminium.

Stock: 0 pcs.

Engine, gerbox, radiator and transfer case protection MET FORD F 150

Stock: 0 pcs.

Kartera aizsargs AL VW CADDY

Under engine cover aluminium- 5mm.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA HILUX REVO

Crankcase protection - front/ engine crankcase protection, OPA067ALU.
- For TOYOTA HILUX REVO, 2015 - (for all engine versions).
- Material: aluminum 6 mm thick.
Fits both cars with original factory bumper and Z020 bumper.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
The crankcase guard is only one part of the crankcase guard kit (OPAK017ALU) but can be used without the need to install other parts.

Stock: 0 pcs.

Kartera aizsargs AL TOYOTA LAND CRUISER 150

Crankcase protection - front/engine and axle crankcase protection, OPA039ALU.
- For Toyota Land Cruiser J150, 2009-2014- , diesel (for cars with bumper Z007).
- Material: aluminum 6 mm thick.
The set of screws required for installation is supplied in the kit, installation is carried out in the original mountings on the car frame.
Vehicles with original factory bumper require OPA034ALU crankcase guard.
The crankcase and axle guard is only one part of the OPAK007ALU kit, but it can be used without the need to install other parts.

Stock: 0 pcs.

Under engine cover aluminium Toyota Landcruiser 150

SKID PLATE Fuel tank - aluminium

Make Toyota
Model Land Cruiser 150
Assemblage year / Engine (2010 - 2017): 3.0TD, 4.0D, 4.0, 2.8
Assemblage year / Engine (2017 -): 2.8 AT
Material aluminium 5mm
Weight 10 kg
Skid plate is compatible with three-door and five-door versions.

Stock: 0 pcs.