All products

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.

Gaismas atstarotājs

Rectangular light reflector, red, 94×44 mm, fixed with adhesive tape.

Stock: > 1 pcs.

Gaismas atstarotājs

Rectangular light reflector, white, 94×44 mm, fixed with adhesive tape.

Stock: > 1 pcs.

Papildlukturu LED komplekts

Bespoke vehicle integration kit for Lazer LED light installation. Custom fit for Toyota Land Cruiser 250 (2024+). Designed for use with ST4 Evolution High Performance LED Lights. Kit also includes mounting brackets and two-lamp wiring kit.
- Brackets made from high strength, UV -stable, composite material,
- Fully road-legal,
- 5-year warranty,
- Made in Britain.
SPECIFICATIONS:
- Voltage Range (DC) 10-32V
- LED Life 50,000 hours
- Weight 1.34 kg
HIGH BEAM FUNCTION:
- Total Luminous Flux 8,272 Lm
- Total Driver 'FOV' Flux 4,980 Lm
- Colour Temperature 5000K
- Power Consumption 94 Watts
- Peak Current Draw 11 Amps
- Current Draw (14.4V) 6.6 Amps
- Connector 2-Pin Superseal (+25cm Cable)
CERTIFICATION:
- IP Rating # IP68
- High Beam (E9 approval) ECE R149 - Ref: 2x 10
- EMC Certification ECE R10
- Salt Spray Test ISO 9227
- Dump Load Protection ISO 7637-2
KIT INCLUDES:
1x Grille Mounting Kit,
2x ST4 Evolution LED Lamps,
1x Two-Lamp Wiring Kit,
Installation Instructions.

Additionally required LAZER CNY-DIR-K

Stock: > 1 pcs.

Aizmugures bampera uzlika MERCEDES BENZ M-klasse(W164)

4710093 - Rear bumper trim.
- For Mercedes M-Class (W164) 2005-2011,
- Made of stainless steel (glossy finish),
- Dimensions: 89.3 / 11 cm,
- Easy installation - fixed with double-sided adhesive tape, which is located on all four edges of the bumper trim.

Stock: 0 pcs.

Urbju komplekts metālam

gold-black metal drills 1.0-13.0mm made of 4341 HSS high-speed steel, TiN coated (titanium nitride). Drills compliant with DIN 338. Cylindrical handle.
Drills designed for making through and blind holes. They have two central blades ground at an angle of 135° and grooves that effectively remove chips up the hole.
Drills coated with a TiN layer are designed especially for machining difficult-to-cut materials. The use of a TiN coating results in an increase in the hardness of the drills, allows for the acceleration of the cutting process and allows for better quality of the processed elements. The titanium nitride layer reduces the wear of the blade by reducing the friction force, and therefore extends the life of the drills.
Drills packed in a convenient plastic box for storage.
Product characteristics:
drills made of HHS 4341 high-speed steel
TiN (titanium nitride) coating
very good waste removal thanks to the ground spiral
2-step tip ground at an angle of 135°
perfectly ground cutting edge
Technical specifications:
Steel: HSS 4341
Coating: TiN
Size: 1.00 / 1.50 / 2.00 / 2.50 / 3.00 / 3.50 / 4.00 / 4.50 / 5.00 / 5.50 / 6.00 / 6.50 / 7.00 / 7.50 / 8.00 / 8.50 / 9.00 / 9.50 / 10.00 / 10.50 / 11.00 / 11.50 / 12.00 / 12.50 / 13.00 mm
Top: 2-step, ground at 135°

Stock: > 1 pcs.

Double-sided adhesive

Stock: > 1 pcs.

Electric extension cord

Stock: > 1 pcs.

Electric heater

Stock: > 1 pcs.

Drill with vice

Stock: > 1 pcs.

Līmlente

Packing adhesive tape 48mm x 90m - transparent

Stock: 0 pcs.

Līmlente

Packing adhesive tape 48mm x 50m - transparent

Stock: > 1 pcs.

Set of step drills

Stock: > 1 pcs.

Instrumentu komplekts

4 Phillips bits 25mm: PH1, PH2 (x2), PH3
4 PoziDriv bits 25mm: PZ1, PZ2 (x2), PZ3
12 Torx bits 25mm: TX10 (x2), TX15 (x2), TX20 (x3), TX25 (x2), TX30 (x2), TX40
7 Torx bits with hole 25mm: TX B07, TX B08, TX B09, TX B010, TX B015, TX B020, TX B025
4 HEX bits 25mm: 3, 4, 5, 6 mm
bit holder

Stock: > 1 pcs.

Neilona savilcēji

Plastic cable ties .
-350x7.6 mm.
- black
- 50 pcs./set
Technical data:
- Made of high quality polyamide, with UV filter.
- Tear-resistant.
- Retains its properties in the temperature range from -40°C to +85°C. - Wide range of applications.
- Disposable product.

Stock: > 1 pcs.

Corner adaptor gear for drill

Stock: 0 pcs.

Leņķa skrūvgriezis uzgaļiem

Angle screwdriver for 1/4' bits
Angle screwdriver suitable for 1/4” bits.
Indispensable in places where it is impossible to use screwdrivers or manual screwdrivers directly due to limited maneuvering space. Made of CrV tool steel.
The ribbed surface of the screwdriver provides a secure grip.
Length: 105 mm.

Stock: 0 pcs.

Gari magnētiskie uzgaļi

Long magnetic socket heads set, 6-13mm.
The set includes 8 bits, 150 mm long and 6-13 mm in size.
Each bit has a magnet inside, ensuring secure holding of the screw/bolt.
Product features:
- Made of durable chrome vanadium (CrV) tool steel.
- Equipped with a magnet that holds the screw/bolt.
- Length: 150 mm, which allows you to reach hard-to-reach places.
- 8 bits in sizes: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm.

Stock: > 1 pcs.

Sešstūra magnētiskie uzgaļi

Magnetic hexagon sockets 8 mm x 48 mm ,1/4'.
The bits have a strong magnet inside that securely holds screws, sheet metal screws, etc.
Made of high-quality CrV steel, designed for use with screwdrivers.
The set includes 5 pcs. hex bits 8 x 48 mm, 1/4'.

Stock: > 1 pcs.