moldings
Car styling strip - 5 M,
- 40 X 4 MM
The flexible decorative strip chrome is weatherproof. Its assembly is very simple. The decorative strip has a strong double-sided adhesive tape on the underside. Decorative tape has a wide range of applications, such as: car interior decoration - on the dashboard, car exterior decoration - on bumpers and doors, yacht decoration, caravan decoration, home interior decoration. Dimensions: Width: 40 mm. Length: 5m.
Facility: Thoroughly clean the surface, removing oil and grease residues. Apply the tape to the bodywork and mark the position. Cut the decorative strip to the desired dimensions (leave about 1 cm margin). Remove the protective double-sided tape and stick the tape along the marked line. Press the strip with your fingers along its entire length. Attention. Install the decorative strip when the air temperature is above 18°C. Avoid washing the car in an automatic car wash for several hours after installation.
Stock:
> 1 pcs.
|
|
|
|
|
moldings
Car styling strip - 5 M,
- 26 X 5 MM
The flexible decorative strip chrome is weatherproof. Its assembly is very simple. The decorative strip has a strong double-sided adhesive tape on the underside. Decorative tape has a wide range of applications, such as: car interior decoration - on the dashboard, car exterior decoration - on bumpers and doors, yacht decoration, caravan decoration, home interior decoration. Dimensions: Width: 26 mm. Length: 5m.
Facility: Thoroughly clean the surface, removing oil and grease residues. Apply the tape to the bodywork and mark the position. Cut the decorative strip to the desired dimensions (leave about 1 cm margin). Remove the protective double-sided tape and stick the tape along the marked line. Press the strip with your fingers along its entire length. Attention. Install the decorative strip when the air temperature is above 18°C. Avoid washing the car in an automatic car wash for several hours after installation.
Stock:
> 1 pcs.
|
|
|
|
|
Halogēnlampa OSRAM
O64193NL-2HB - OSRAM NIGHT BREAKER LASER 64193NL-2HB H4 P43t 12V 60/55W
Stock:
0 pcs.
|
|
|
|
|
Sēdekļu pārvalks Tailor Made Man TGX II
Tailor Made 1TP for passenger seat MAN TGX II from 2020
Tailor-made cover for the first row of seats as indicated on the label.
The set contains seat covers for:
1 passenger seat (the cover fits the armrests mounted on the sides of the seatbacks)
Stock:
0 pcs.
|
|
|
|
|
Sēdekļu pārvalks Tailor Made Man TGX II
Tailor Made 1TD for driver seat MAN TGX II from 2020
Tailor-made cover for the first row of seats as indicated on the label.
The set contains seat covers for:
1 driver seat (the cover fits the armrests mounted on the sides of the seatbacks)
Stock:
0 pcs.
|
|
|
|
|
Logu slotiņas
The original 'Multiclip' series wiper blades from EinParts Automotive brand are an innovative and high-quality solution, offering even better resistance to wear and weather conditions due to the use of high-quality materials.
The frameless design of the wiper blade ensures a perfect fit to the shape of the windshield, and the graphite blade guarantees quiet and precise operation.
The 'Multiclip' series features a set of universal mounting adapters and an innovative blade construction, ensuring excellent and long-lasting wiping effects.
Each wiper blade comes with up to 10 adapters, making it compatible with 99% of passenger, commercial, and heavy-duty vehicles, including newer models.
The list of included adapters for each wiper blade includes:
Adapter type A/A1 - dedicated to arms with special side mounting, used in cars such as Alfa Romeo, BMW, Opel, Seat, VW.
Adapter type B - installed by pressing, used in cars such as Citroen, Fiat, Ford, Kia, Opel, Renault, and others.
Adapter type B1 - also installed by pressing with an additional locking element for the mounting rail. Used in Japanese cars such as Honda, Mazda, Mitsubishi, Nissan, Subaru, and Toyota.
Adapter type C - the set includes two pieces, one for the right and one for the left (for two wiper systems: 'single sweep wipers' moving from right to left and for the 'double sweep wipers' moving from the center to the sides). Used in modern cars, most often produced after 2004.
Adapter type C1 - a typical adapter for VW cars, used in Audi, BMW, Porsche, Seat, Skoda, VW, and others. Mounted on a simple hook with a width of about 5-6 mm.
Adapter type D - a bayonet-shaped adapter, typical for thin and flat D-type mountings that are inserted into the adapter until they are locked. Used in cars such as Citroen, Dacia, Fiat, Peugeot, Smart, Saab, and many others.
Adapter type E/E1 - mounting used in some American and Japanese cars. The adapter is folded into type E1, to make it a type E mounting, the square Holding element needs to be removed, increasing the mounting hole.
Adapter type F - the F-type adapter is most commonly used in cars such as Ford, Chrysler, Dodge, Jeep, and some Chevrolet models. However, many other manufacturers also use this type of adapter, such as Volvo, BMW, Audi, Mercedes-Benz, and Volkswagen.
Adapter type U - dedicated to the classic U-type (hook) mounting. These mountings are used in most passenger, commercial, and heavy-duty vehicles (about 75% of available vehicles have U-type mountings).
The huge set of included adapters ensures that the purchased wiper blade will be suitable for your car model and brand.
Stock:
> 1 pcs.
 |
|
|
|
|
Logu slotiņas
The original 'Multiclip' series wiper blades from EinParts Automotive brand are an innovative and high-quality solution, offering even better resistance to wear and weather conditions due to the use of high-quality materials.
The frameless design of the wiper blade ensures a perfect fit to the shape of the windshield, and the graphite blade guarantees quiet and precise operation.
The 'Multiclip' series features a set of universal mounting adapters and an innovative blade construction, ensuring excellent and long-lasting wiping effects.
Each wiper blade comes with up to 10 adapters, making it compatible with 99% of passenger, commercial, and heavy-duty vehicles, including newer models.
The list of included adapters for each wiper blade includes:
Adapter type A/A1 - dedicated to arms with special side mounting, used in cars such as Alfa Romeo, BMW, Opel, Seat, VW.
Adapter type B - installed by pressing, used in cars such as Citroen, Fiat, Ford, Kia, Opel, Renault, and others.
Adapter type B1 - also installed by pressing with an additional locking element for the mounting rail. Used in Japanese cars such as Honda, Mazda, Mitsubishi, Nissan, Subaru, and Toyota.
Adapter type C - the set includes two pieces, one for the right and one for the left (for two wiper systems: 'single sweep wipers' moving from right to left and for the 'double sweep wipers' moving from the center to the sides). Used in modern cars, most often produced after 2004.
Adapter type C1 - a typical adapter for VW cars, used in Audi, BMW, Porsche, Seat, Skoda, VW, and others. Mounted on a simple hook with a width of about 5-6 mm.
Adapter type D - a bayonet-shaped adapter, typical for thin and flat D-type mountings that are inserted into the adapter until they are locked. Used in cars such as Citroen, Dacia, Fiat, Peugeot, Smart, Saab, and many others.
Adapter type E/E1 - mounting used in some American and Japanese cars. The adapter is folded into type E1, to make it a type E mounting, the square Holding element needs to be removed, increasing the mounting hole.
Adapter type F - the F-type adapter is most commonly used in cars such as Ford, Chrysler, Dodge, Jeep, and some Chevrolet models. However, many other manufacturers also use this type of adapter, such as Volvo, BMW, Audi, Mercedes-Benz, and Volkswagen.
Adapter type U - dedicated to the classic U-type (hook) mounting. These mountings are used in most passenger, commercial, and heavy-duty vehicles (about 75% of available vehicles have U-type mountings).
The huge set of included adapters ensures that the purchased wiper blade will be suitable for your car model and brand.
Stock:
> 1 pcs.
 |
|
|
|
|
Logu slotiņas
The original 'Multiclip' series wiper blades from EinParts Automotive brand are an innovative and high-quality solution, offering even better resistance to wear and weather conditions due to the use of high-quality materials.
The frameless design of the wiper blade ensures a perfect fit to the shape of the windshield, and the graphite blade guarantees quiet and precise operation.
The 'Multiclip' series features a set of universal mounting adapters and an innovative blade construction, ensuring excellent and long-lasting wiping effects.
Each wiper blade comes with up to 10 adapters, making it compatible with 99% of passenger, commercial, and heavy-duty vehicles, including newer models.
The list of included adapters for each wiper blade includes:
Adapter type A/A1 - dedicated to arms with special side mounting, used in cars such as Alfa Romeo, BMW, Opel, Seat, VW.
Adapter type B - installed by pressing, used in cars such as Citroen, Fiat, Ford, Kia, Opel, Renault, and others.
Adapter type B1 - also installed by pressing with an additional locking element for the mounting rail. Used in Japanese cars such as Honda, Mazda, Mitsubishi, Nissan, Subaru, and Toyota.
Adapter type C - the set includes two pieces, one for the right and one for the left (for two wiper systems: 'single sweep wipers' moving from right to left and for the 'double sweep wipers' moving from the center to the sides). Used in modern cars, most often produced after 2004.
Adapter type C1 - a typical adapter for VW cars, used in Audi, BMW, Porsche, Seat, Skoda, VW, and others. Mounted on a simple hook with a width of about 5-6 mm.
Adapter type D - a bayonet-shaped adapter, typical for thin and flat D-type mountings that are inserted into the adapter until they are locked. Used in cars such as Citroen, Dacia, Fiat, Peugeot, Smart, Saab, and many others.
Adapter type E/E1 - mounting used in some American and Japanese cars. The adapter is folded into type E1, to make it a type E mounting, the square Holding element needs to be removed, increasing the mounting hole.
Adapter type F - the F-type adapter is most commonly used in cars such as Ford, Chrysler, Dodge, Jeep, and some Chevrolet models. However, many other manufacturers also use this type of adapter, such as Volvo, BMW, Audi, Mercedes-Benz, and Volkswagen.
Adapter type U - dedicated to the classic U-type (hook) mounting. These mountings are used in most passenger, commercial, and heavy-duty vehicles (about 75% of available vehicles have U-type mountings).
The huge set of included adapters ensures that the purchased wiper blade will be suitable for your car model and brand.
Stock:
> 1 pcs.
 |
|
|
|
|
Logu slotiņas
'Multiclip' series wiper blades from EinParts Automotive brand are an innovative and high-quality solution, offering even better resistance to wear and weather conditions due to the use of high-quality materials.
The frameless design of the wiper blade ensures a perfect fit to the shape of the windshield, and the graphite blade guarantees quiet and precise operation.
The 'Multiclip' series features a set of universal mounting adapters and an innovative blade construction, ensuring excellent and long-lasting wiping effects.
Each wiper blade comes with up to 10 adapters, making it compatible with 99% of passenger, commercial, and heavy-duty vehicles, including newer models.
The list of included adapters for each wiper blade includes:
Adapter type A/A1 - dedicated to arms with special side mounting, used in cars such as Alfa Romeo, BMW, Opel, Seat, VW.
Adapter type B - installed by pressing, used in cars such as Citroen, Fiat, Ford, Kia, Opel, Renault, and others.
Adapter type B1 - also installed by pressing with an additional locking element for the mounting rail. Used in Japanese cars such as Honda, Mazda, Mitsubishi, Nissan, Subaru, and Toyota.
Adapter type C - the set includes two pieces, one for the right and one for the left (for two wiper systems: 'single sweep wipers' moving from right to left and for the 'double sweep wipers' moving from the center to the sides). Used in modern cars, most often produced after 2004.
Adapter type C1 - a typical adapter for VW cars, used in Audi, BMW, Porsche, Seat, Skoda, VW, and others. Mounted on a simple hook with a width of about 5-6 mm.
Adapter type D - a bayonet-shaped adapter, typical for thin and flat D-type mountings that are inserted into the adapter until they are locked. Used in cars such as Citroen, Dacia, Fiat, Peugeot, Smart, Saab, and many others.
Adapter type E/E1 - mounting used in some American and Japanese cars. The adapter is folded into type E1, to make it a type E mounting, the square Holding element needs to be removed, increasing the mounting hole.
Adapter type F - the F-type adapter is most commonly used in cars such as Ford, Chrysler, Dodge, Jeep, and some Chevrolet models. However, many other manufacturers also use this type of adapter, such as Volvo, BMW, Audi, Mercedes-Benz, and Volkswagen.
Adapter type U - dedicated to the classic U-type (hook) mounting. These mountings are used in most passenger, commercial, and heavy-duty vehicles (about 75% of available vehicles have U-type mountings).
The huge set of included adapters ensures that the purchased wiper blade will be suitable for your car model and brand.
Stock:
> 1 pcs.
 |
|
|
|
|
Battery charger
An advanced charging function rectifier EPCBC03 . Powered by 230V AC voltage, it offers an output voltage of 12/24V, providing versatile charging. The rectifier is ideal for charging batteries for cars with START / STOP engines.
Technical data:
Power supply: 230V AC.
Output Voltage: 12/24V.
Output Current: Max 15A.
Maximum load power: 130W.
Power without load: 3.2W.
Cooling System: Fan.
Dimensions: 17.5x13.5x7.5cm.
Voltage identification for 12V: 8V - 14.5V.
Voltage identification for 24V: 18V - 29V.
Output cable length: 120 cm.
Input cable length: 140 cm.
8 STAGES OF CHARGING:
Phase 1: Battery Assessment - Examining the battery's charge state and verifying the correctness of the connections to the rectifier.
Phase 2: Desulfation - Identifying a battery with sulfate deposits. Low-voltage, high-current pulsating charging allows for the removal of sulfate from electrodes, restoring the original battery capacity.
Phase 3: State Check - Checking whether the battery is not damaged and whether it is capable of accepting a charging current. This prevents charging a damaged battery.
Phase 4: Soft Start - Begins charging an undamaged battery with low current (about 15%), gradually increasing its value.
Phase 5: Main Charging - Charging the battery with maximum constant current, automatically adjusted depending on the charge state, until 80% capacity is reached.
Phase 6: Final Charging - Charging with decreasing current and constant voltage until the battery is fully charged (100%).
Phase 7: Charging Test - About a two-minute test to check if the battery charge level is maintained after charging has ended. If so, the charging process is completed.
Phase 8: Voltage Maintenance - Monitoring the battery voltage and maintaining an optimal charge at the 95-100% capacity level using current pulses.
Stock:
> 1 pcs.
 |
|
|
|
|
Kompresors
EPSL03 -tire Sealant 400 ml.
The tire sealant is a product for quick repair of tubeless tires, applied directly into the tire through the air valve. The sealant is based on gel molecule technology, which can be easily washed out with water to allow for later full repair.
An air compressor is required to introduce the sealant directly into the tire.
Does not damage the tire, easily washes out with water, allowing for full repair.
Compatible with any air compressor supporting standard Schrader car valves.
Refill bottle for compressor kit model: EPAP09. See the EPAP09 compressor kit.
Technical Specifications:
Connection: Schrader car valve (AV)
Storage Temperature: -30 °C to +70 °C
Operating Temperature: -30 °C to +70 °C
Capacity: 400 ml.
Shelf Life: 5 years from the production date.
Stock:
> 1 pcs.
|
|
|
|
|
Kompresors
EPSL02 -tire Sealant 450 ml.
The tire sealant is a product for quick repair of tubeless tires, applied directly into the tire through the air valve. The sealant is based on gel molecule technology, which can be easily washed out with water to allow for later full repair.
An air compressor is required to introduce the sealant directly into the tire.
Does not damage the tire - Easily washes out with water, allowing for full repair.
Compatible with any air compressor supporting standard Schrader car valves.
Refill bottle for compressor kit model: EPAP08.
See the EPAP08 compressor kit .
Technical Specifications:
Connection: Schrader car valve (AV)
Storage Temperature: -30 °C to +70 °C
Operating Temperature: -30 °C to +70 °C
Capacity: 450 ml
Shelf Life: 5 years from the production date
Stock:
> 1 pcs.
|
|
|
|
|
Kompresors
EPSL01- tire sealant 450 ml.
Refill bottle for compressor kit model: EPAP07.
The tire sealant is a product for quick repair of tubeless tires, applied directly into the tire through the air valve. The sealant is based on gel molecule technology, which can be easily washed out with water to allow for later full repair.
An air compressor is required to introduce the sealant directly into the tire.
Does not damage the tire - Easily washes out with water, allowing for full repair.
Compatible with any air compressor supporting standard Schrader car valves.
compressor kit.
Technical Specifications:
Connection: Schrader car valve (AV)
Storage Temperature: -30 °C to +70 °C
Operating Temperature: -30 °C to +70 °C
Capacity: 450 ml
Shelf Life: 5 years from the production date
Stock:
> 1 pcs.
|
|
|
|
|
Kompresors
EPAP09- Compressor 120W with Sealant 400 ml.
Repair kit equipped with a compact 400ml sealant, perfect for quickly fixing punctures in tubeless tires. The high-performance compressor and durable construction make the set an excellent solution for traveling drivers.
Included in the set:
120W Compressor.
400ml Sealant.
Needle for inflating balls and nozzle
Storage case/bag.
COMPRESSOR - Technical Specifications:
Storage Temperature: -30 °C to +70 °C
Operating Temperature: -20 °C to +60 °C
Performance: Large wheel (50 liters) inflates in approx. 7 minutes to 2.5 bar
Power cord length: 3m
Air hose length: 50 cm
Max current draw: 10A
Max power: 120W
Max working pressure: 90 psi/6.2 bar
Electrical connection: Car socket plug
SEALANT - Technical Specifications:
Connection: Schrader-type car valve (AV)
Storage Temperature: -40 °C to +80 °C
Operating Temperature: -30 °C to +70 °C
Capacity: 400 ml
Stock:
> 1 pcs.
|
|
|
|
|
Kompresors
EPAP08- compressor 120W with Sealant 450 ml.
A complete repair kit for quick and effective tire repairs. The set includes a high-performance compressor and a sealant that enables immediate sealing of punctures in tubeless tires. The perfect solution for drivers who value safety and convenience while traveling.
Included in the set:
120W Compressor.
450ml Sealant.
Needle for inflating balls and nozzle.
Storage case/bag.
COMPRESSOR - Technical Specifications:
Storage Temperature: -30 °C to +70 °C
Operating Temperature: -20 °C to +60 °C
Performance: Large wheel (50 liters) inflates in approx. 5 minutes to 2.5 bar.
Power cord length: 3m.
Air hose length: 50 cm.
Max current draw: 10A.
Max power: 120W.
Max working pressure: 90 psi/6.2 bar
Electrical connection: Car socket plug
SEALANT - Technical Specifications:
Connection: Schrader-type car valve (AV)
Storage Temperature: -40 °C to +80 °C
Operating Temperature: -30 °C to +70 °C
Capacity: 450 ml
Stock:
> 1 pcs.
|
|
|
|
|
Kompresors
EPAP07- tire repair kit with 450ml sealant.
Technical data:
Storage temperature: -30°C to +70°C.
Operating temperature: -20°C to +60°C.
Efficiency: Large wheel (50 liters) inflates in about 5 min to 2.5 bar.
Power cord length: 3m.
Air hose length: 50 cm.
Maximum power consumption: 10A.
Maximum power: 120W.
Maximum working pressure: 10 bar.
Electrical connection: car socket plug.
BOTTLE technical data:
Storage temperature: -40°C to +80°C.
Operating temperature: -30°C to +70°C.
Capacity: 450 ml.
Included in the set:
- 120W Compressor.
- 450ml Sealing fluid.
- ball pumping needle, nozzle.
Stock:
> 1 pcs.
|
|
|
|
|
Lukturis Hella
1AB007145001 Headlight Halogen, rectangular, 12V, transparent/yellow, bolt on, 180x120x126mm, Hella
Unit - Each
Productomschrijving - Headlight for surface mounting
Pros - Universal range of applications, Agricultural vehicles, Construction machines, Vehicles for municipal services
Product details - Supplied without bulb, Compact design, Wide variety of applications
Application - Universal, tractor, Construction vehicle
Authorisation number - E1 44439
Consists of - Bulbs are not included
Bulbs technology - Halogen
Bulbs type - H4
ECE standard - E1 44439
Function - High beam, Low beam, Position light, Vehicle Headlights
Height - 126 mm
Housing colour - Black
Housing material - Plastic
Length (depth) - 120 mm
Lens material - Glass
Light colour - White
Mounting position - Front, Left, Right
Mounting thread diameter - M10
Mounting type - Bolt on
Nominal voltage - 12 V
Plug type - Blade terminal
Shape - Rectangular
Suitable for machine/vehicle brand - Universal
Width - 180 mm
Stock:
0 pcs.
|
|
|
|
|
Sānu slieksnis MB SPRINTER
Running board 'PROBLACK', sidedoor - 818025
- MB SPRINTER 2007- 2018, wheel base L2, L3.
- MB SPRINTER 2018 -- the set consists of items 818643 and 88860371.
- VW CRAFTER 2007-2018, wheel base L2, L3.
- Material: AISI304.
- Surface treatment: painted.
- Approval: in accordance with UNECE legislation R26/R61.
- Load capacity 120 kg.
The price is indicated for 1 piece.
Stock:
> 1 pcs.
|
|
|
|
|
Dubļu aizsargi (kompl. VW GOLF VII
The mud flaps effectively protect the underbody and bumpers against excessive dirt. In addition, they also enormously reduce dangerous road chippings and water spray.
Color: matte black.
Installation is made on regular seats of the car.
The main purpose: to protect the lower part of the car body from chipping, scratching.
With such model mud flaps on your car, you will get rid of such problems as:
- dirt on the bottom of the car,
- intense pollution of the side of the car, starting from the front wings,
- reduction of accumulated dirt or snow on the vehicle’s rapids.
Stock:
0 pcs.
|
|
|
|
|
Dubļu aizsargi (kompl.) TOYOTA RAV 4
The mud flaps effectively protect the underbody and bumpers against excessive dirt. In addition, they also enormously reduce dangerous road chippings and water spray.
Color: matte black.
Installation is made on regular seats of the car.
The main purpose: to protect the lower part of the car body from chipping, scratching.
With such model mud flaps on your car, you will get rid of such problems as:
- dirt on the bottom of the car,
- intense pollution of the side of the car, starting from the front wings,
- reduction of accumulated dirt or snow on the vehicle’s rapids.
Stock:
> 1 pcs.
|
|
|
|
|
