Informācija par sīkdatņu izmantošanu.
Šī vietne izmanto sīkdatnes, lai uzlabotu lietošanas pieredzi un optimizētu tās darbību.
Turpinot lietot šo mājas lapu, Jūs piekrītiet sīkdatņu lietošanai SIA ML-SERVISS tīmekļa vietnē.
Lasīt vairāk
The winch mounting plate - TDodge RAM 1500 2019+ Absolutely essential element to install the winch in the car. It allows for subtle winch mount behind the cars bumper.
All mounting plates are powder painted and supplied with a complete mounting kit designed for a particular car model. Furthermore, during installation you will not need special equipment, ie. welder.
Before buying check the dimensions of the mounting plate for compatibility with your winch or contact us to fit a particular winch model.
Code PLNK28X10 - kinetic rope 28 mm x 10 m, MBL 15T, reinforced loops on both sides. Dimensions: 26 mm x 10 m. Minimum breaking load: 15000 kg. Material: polyamide. Advantages: - elongation at maximum load: up to 30%, - reduced impact on vehicle components, - possibility of dynamic rupture, - ease of towing in confined spaces, - resistance to chemicals and ultraviolet radiation, - professional hand weaving.
S-shaped hook. A very convenient and useful accessory for off-road use. It allows you to quickly connect different types of elements such as straps, shackles, kinetic cables and hooks. Easy and quick installation and dismantling. Tensile strength – 8000 kg. Dimensions: 225 x 100 x 20 mm. Weight 3 kg. Black color.
Windscreen de-icer Quickly and effectively removes ice and frost from car exterior windows and wipers without the risk of damaging them. Safe for rubber, varnish and polycarbonate.
Additional high beam lamp SEEKER QUANTUM LED, code: 1605-NS2070. This is an extremely powerful 9' ultra high beam headlight that is approved for road use. SEEKER QUANTUM LED is equipped with 10 powerful Luminus LEDs that provide plenty of light over long distances and also on roadsides. The headlight has a round shape with a diameter of 229 mm, two functions of the marker light: orange and white (with its own wires, off-road only) and a U-shaped bracket with three screws and space for the top post. . Technical information: - Voltage: 10-32V. - Electricity consumption: 8.3A at 13.7V. - 10 glowing LEDs - Luminous flux: 12000/9500lm (from the manufacturer). - Range: 1 lux 780 m. - Color temperature: 6000K. - Parking light color: orange and white. - Connection type: 4-pin DT connector. - Cable length: 220 cm. - Material: Aluminum body, durable Lexan™ polycarbonate lens. - Stable and easily adjustable U-shaped bracket. - Width: 226 mm - Height: 229 mm (with brackets 247 mm) - Depth: 82 mm (with 100 mm brackets) - Certificates: ECE R112, R10, R7. - Link: 30 - Legal for road use.
The side steps are designed for the VW TOUAREG 2010-2018.g. Made of high quality aluminum and automotive ABS. One side capacity 160 kg. The side steps are designed to improve comfort when entering and exiting the vehicle, and to provide a more comfortable working position when placing cargo on the vehicle roof. The thresholds not only provide comfort, but also increase safety, which is especially important for children and the elderly. In addition, the use of car sills helps to avoid accidental scratching of the paintwork by doors parked next to cars, which sometimes happens in parking lots. The kit includes a set of side steps (right and left), assembly elements and instructions. The sills are mounted at the factory attachment points. Installation of steps does not require additional drilling! We recommend a professional installation in a workshop. A brand new product in its original packaging.
Alumīnija kravas kastes žalūzijas veida vāks VW AMAROK PANAMERICANA 2023+
Aluminum roller lid shutter in black matte color. New generation, patented 'Tessera Roll+' aluminum roller lid shutter, revolutionary and futuristic design, versatility, durability, 100% handmade and with 3 years warranty.
With built-in REAR TAIL LIGHT and STOP signal.
Built-in LED strip with a button located inside the running end bar that illuminates the cargo box from the inside.
It is possible to upgrade the existing BASIC set to the SPRING or ELECTRIC version.
Special aluminum side rails (5 mm thick) with built-in 'T-SLOTS' for convenient and safe installation without additional equipment, for example: roof rails or cross bars.
Specially designed internal locking system with aluminum locking guards to prevent unauthorized access. Use the strap to unlock the Tessera Roll+ automatically.
Specially designed wider, stronger slats for 100% load safety and rubber for maximum insulation.
2 specially designed '20' drainage systems with 2 overflow systems and integrated 'ANTI-LEAF' technology, for complete drainage and water protection.
An innovative rear slat design combined with the smallest tank dimensions (26cm x 30cm) offers the advantage of increased capacity in both length and height.
Specially designed tank cover for easy access and control of the Tessera Roll+.
Next generation powder coating (Class 2) with fine texture and high weather resistance.
Simple installation in vehicles with or without bedliner. In the case of Bedliner, it can be easily installed with UNDER-rail or OVER-rail types.
Easy and quick installation without drilling holes.
VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
Semi-automatic towbar Mechanism with quickly demountable ending
Body install: 1. Fix body of the mechanism to brackets by bolts M12x25mm.
Ball fastening: 1. To install the ball in mechanism push the lever down till resistance. 2. Slip the ball into body in this way so pins if the ball will be in nests of the body. 3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism. 4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.
Ball unfastening: 1.To unfasten the ball take out the safety pin. 2.Push the lever down till resistance. 3.With fast move take out the ball. Let go the lever. It should return to initial position. 4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.
Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
Get ready for the winter season with METEC snow plows. V plow for 4x4 car. Snow plow frame 888698 is included in the package. The car model adapter must be selected separately depending on the required car model.
- Hydraulic lift up and down, - Hydraulic blade turning, - The snow plow is controlled by a Wi-Fi remote, - EU license plate holder included.
The complete set consists of Snow plow + car adapter. You can find out the price of the adapter by entering the required code in the search engine. Types of adapters:
Get ready for the winter season with METEC snow plows. D plow for 4x4 car. Snow plow frame 888698 is included in the package. The car model adapter must be selected separately depending on the required car model.
- Electric lift up and down, - Electric blade turning, - The snow plow is controlled by a Wi-Fi remote.
D plow type shovel for 4x4 car. Shovel frame 888698 is included. The car model adapter must be selected separately depending on the required car model. Electric lift up and down, mechanical shovel rotation right and left.
Additionally you can get an accessory for the snow plow - 888810 - Additional light and license plate holder for D plow type snow shovel. EU license plate holder included. Weight 6 kg.
The complete set consists of Snow plow + car adapter. You can find out the price of the adapter by entering the required code in the search engine. Types of adapters:
Code 1605-NS3867. The W-light Impulse 4.1 additional high beam headlight is a stylish frameless model of a new generation of additional light with dark optics. The headlight has a good combination beam that provides the user with a beam width and range of 1 lux at a distance of 463 m. The Impulse Series optional lights are compact and provide a stylish and unobtrusive installation. The frameless lens and sleek profile minimize the accumulation of dirt and ice. W-Light Impulse 4.1 is the longest model in the Impulse series, its length is 787 mm. The optional headlight has universal mounting options and a long mounting cable for easy installation. Technical information: - Voltage: 11-32 V - Current consumption: 9.73 A at 13.7 V, - LED: 30 x Osram - Luminous flux (theoretical/measured): 13500 lm/ 11140 lm - Color temperature: 5700K. - Distance range: 1 lux at a distance of 463 m. - Connection type: 2-pin DT connector. - Cable length: 2.20 m - Housing material: aluminum - Lens material: polycarbonate. - Certificates: P112, P10, ref.50. - Dimensions: 787.00 x 36.00 x 58.00 mm. - Weight: 2.1 kg
Code 1605-NS3843. The optional W-Light Impulse III high beam headlight is a compact and very powerful spotlight. Its bright light provides an optimal and uniform light beam. The light has an excellent color index and color temperature, making it pleasing to the eye. Versatile mounting options. The floodlight comes with a long power cable, making it easy to install. Plug&Drive 1605-WK031 wiring (not included) simplifies installation. Specifications: - Voltage: 10-32 V - Current consumption: 9.6 A at 13.7 V, - LED: 36 x Osram - Luminous flux (theoretical/measured): 15120 lm/ 11400 lm - Color temperature: 5000K. - Distance range: 1 lux at a distance of 549 m. - Plug: 2-pin DT. - Cable length: 2.20 m - Housing material: Aluminum - Lens material: polycarbonate. - Certificates: R112, ref. 2x40, Р10. - Dimensions: 527.00 x 57.00 x 75.00 mm. - Weight: 2.35 kg
The winch mounting plates - MERCEDES BENZ SPRINTER 2018- Absolutely essential element to install the winch in the car. It allows for subtle winch mount behind the cars bumper.
All mounting plates are powder painted and supplied with a complete mounting kit designed for a particular car model. Furthermore, during installation you will not need special equipment, ie. welder.
Before buying check the dimensions of the mounting plate for compatibility with your winch or contact us to fit a particular winch model.
