All products

Paklājs bagāžniekā SKODA ENYAQ iV

Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Paklājs bagāžniekā MERCEDES BENZ GLA-klasse

Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Under engine cover aluminium FORD RANGER 2023-/VW AMAROK 2023-

Steering rod guard AL- 5mm.

Stock: 0 pcs.

Under engine cover aluminium FORD RANGER 2023-/VW AMAROK 2023-

Crankcase protection AL- 5mm.

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER 2023-/VW AMAROK 2023-

Crankcase guard rear part.
- Protects the gearbox.
- Material: Aluminum - 5mm.
- Comes with everything needed for installation.

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER 2023-/VW AMAROK 2023-

SKID PLATES for tank
AL 5mm.

Stock: 0 pcs.

Reduktora aizsargs AL 5mm FORD RANGER 2023-/VW AMAROK 2023-

Differential guard 5mm aluminium.

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER 2023-/VW AMAROK 2023-

Crankcase guard rear part.
- Protects the gearbox.
- Material: Aluminum - 5mm.
- Weight 18 kg.
- Comes with everything needed for installation.

Stock: 0 pcs.

Papildlukturis LED komplekts

LAZER GK-VWA-ELITE-03K - Exclusive Lazer LED auxiliary headlight kit for VW Amarok, 2023 -
Fully road legal.
The LED headlight kit is designed for vehicle installation and is optimized for use with the high-performance Triple-R 750 LED headlights.
Included in the package:
- 2x Triple-R 750 - 2 pcs.
- precisely designed mounting brackets - 4 pcs. and bolts that are made of high-strength, UV-resistant composite material.
- a set of wires for connecting two headlights.
Data sheet:
- 2x Triple-R 750 Elite (E-Boost mode)
- High beam function
- Voltage range (DC): 10-32V
- Power consumption: 104 W
- Current consumption (at 14.4V): 7.2A
- Number of LEDs: 2 x 4
- LED service life: 50,000 hours.
- Total luminous flux: 10136 lm
- Driver Field of View Total Flux†: 6680 Lumens († Driver Field of View Flux is a measure of effective lumens that takes into account the amount of light in the driver's 'field of view', defined as an area of +/- 45o left/right and +/- 10° up/down .)
- Color temperature: 5000K
CERTIFICATION
- High beam: ECE R112.
- EEC standard: not applicable (12.5 x 2 - E-Mark mode)
- Positioning light (white only): no
Photometric data:
- Horizontal beam angle: 42°
- 0.25 lux Line 1358m
- 0.5 lux Line 960m
- 1 lux line 679m
- 3 lux Line 392m
Weight 2 kg.
5 years warranty
Made in Great Britain.

Additionally required LAZER CNY-DIR-K

Stock: > 1 pcs.

Tow bar FORD TRANSIT

Stock: 0 pcs.

Sensor protection plate ALUMINUM FORD RANGER 23 -/ VW AMAROK 23-

Protection cover for sensors.
The protective vehicle accessories help prevent or reduce damage to the vehicle itself in the event of minor collisions.
Made from corrosion-resistant materials aluminium 5mm.
Installation is done based on the model - no need to drill or weld.

Stock: 0 pcs.

Sānu sliekšņi VW AMAROK, FORD RANGER

Side steps compatible with Ford Ranger 2023+ and Volkswagen Amarok 2023+
Side steps made of PP polypropylene (plastic resistant to corrosion and UV radiation)
Sturdy metal brackets
Comfortable, wide construction
Non-slip surface
Elegant appearance
Easy installation without drilling
Environmentally friendly, 100% recyclable
Maximum load capacity: 150 kg

Stock: 0 pcs.

Sānu sliekšņi VW AMAROK

Side steps make it easier to get into a car, such as a pickup truck or SUV. The stainless steel side steps are made of 70 mm diameter and 2 mm thick bars. The installation uses the original mounting points, so the car retains its original construction.
With the product you will find a stainless steel mounting kit for your car and instructions for easy installation. The solid construction ensures a static load of 115 kg, so the steps can be successfully used by adults.
Stainless steel (AISI 304) has a very high resistance to corrosion in all weather conditions.
The highest quality is confirmed by TÜV and EN ISO 9001:2008 certificates.

Stock: 0 pcs.

Akumulatora lādēšanas ierīce

Compact and powerful lithium starter OSRAM BATTERYstart 300 with external battery function for small and medium-sized vehicles with a voltage of 12 V (petrol engines 6 l and diesel engines 3 l).
The starter is equipped with a bright LED flashlight.
This jump starter features a power bank feature with two 2.1A USB ports to charge your electronic devices on the go - just plug in the USB charger and the battery starts working.
Technical description:
- Voltage: 12 V.
- Starting current: 300A (max. 1500A)
- Battery: LiCo2 13000 mAh.
- Charging: micro USB 3 hours.
- Operating temperature: -20°С…+40°С
- Dimensions: 168.00 x 88.00 x 33.00 mm.
- Weight: 490 g.

Stock: 0 pcs.

Kalpaki dekoratīvie

Wheel caps WIND 17 color silver.
- size 17.
- 4 pieces.

Stock: > 1 pcs.

Relejs

Universal relay 12V 40A.
Technical details:
- Maximum working current: 40A
- Voltage: 12V
- Number of contacts: 5, with different colored wires.
- Wire length: 14.5 cm.
- Thickness of current wires: 6.3 mm.

Stock: > 1 pcs.

Rezerves ritenis un instrumentu komplekts

Compact spare wheel 145/85 R18 and tool kit.
- Size: 145/85 R18.
- Tire brand: LINGLONG.
- Bolt spacing: 5 x114.3mm x 60.1mm
The kit includes:
-Compact spare wheel 145/85 R18.
- Trapezoidal jack with ratchet mechanism.
- Wheel wrench with 2 sockets.
- A case for storage of a jack and a wheel key.
- Spare wheel cover.
- Protective gloves.

Stock: 0 pcs.

Auto sakabes āķis VOLVO V90 Cross Country

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis VOLVO V90 Cross Country

Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Auto sakabes āķis VOLVO V90 Cross Country

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.