All products

Paklājs bagāžniekā SEAT LEON IV (MK4)/CUPRA LEON

Approximate product dimensions (cm): 78 x 112
Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Paklājs bagāžniekā CHRYSLER PACIFICA

Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Under engine cover aluminium FORD RANGER RAPTOR

Stock: 0 pcs.

Kartera aizsargs AL FORD RANGER

Aluminum skid plate for VW Amarok 2023 and Ford Ranger 2023
Specifications:
Weight: 24.0 kg
Material: AW5754
Aluminum width: 5 mm
Product compliance: Valid according to UNECE R26/R61
Engine, gearbox and transfer case protection.

Stock: > 1 pcs.

Tow bar VOLVO V40

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Halogēnlampa H4 60w/55w 12V

+100%
Car lamp
NIGHT BREAKER H4 60/55W 12V P43T Osram O64193NBS01B

Stock: 0 pcs.

ķēdes riepām

KB-250
Set: 2 pcs.
- 16 mm
-TÜV / GS
-for cars: up to 7500 kg

255/65 R15

275/55R16
255/65R16
245/70R16
215/80R16

235/65 R17
245/65 R17
225/70 R17
235/70 R17
215/75.5 R17

285/40 R18
270/45 R18
235/60 R18
225/65 R18

275/40 R19
255/45 R19
235/50 R19
245/50 R19
235/55 R19

255/40 R20
235/45 R20
245/45 R20

265/35 R21

Stock: > 1 pcs.

Numura rāmis

License plate holder, color blue.

Stock: > 1 pcs.

Lādēšanas ierīce USB

USB charger.
Charging current:
2 sockets 1x1A, 1x2.1A, total 3.1A Input voltage: 12/24V

Stock: > 1 pcs.

Aizmugures bampera uzlika MB Citan / Renault Kangoo

Rear bumper cover from stainless steel.
MERCEDES - BENZ CITAN 22 -
RENAULT KANGOO 22 -

Stock: > 1 pcs.

Engine, gearbox and radiator protection MET HYUNDAI IONIQ

Stock: 0 pcs.

Engine, gearbox and radiator protection MET HYUNDAI IONIQ

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET FORD TRANSIT 2022-

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET FORD TRANSIT 2019-2022

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FORD TRANSIT 2019-

Stock: 0 pcs.

Engine, gearbox and radiator protection MET FORD TRANSIT 2019-

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET FORD TOURNEO CUSTOM

Metal protection made from 2mm steel.
Is covered by layer of zinc, paint and varnish.
All necessary installation screws and brackets are included.

Stock: 0 pcs.

Auto sakabes āķis TESLA Model 3

Towbar Tesla Model 3 (2017- ) - model(s) with maximum towing capacity

Vertical load on the ball -116 kg.
The mass of the towed trailer is 1600 kg (the maximum towing capacity depends on the total weight of the vehicle and can therefore be lower)
Before installing the hook, make sure it is prepared for this. It depends on the color of the indicator located on the handle. The indicator should be red. Otherwise, press the knob and turn it (always pressed) clockwise until it reaches its final position. The handle must remain in this position.
Remove the plug that protects the inside of the housing from dirt. Make sure the inside of the case is not contaminated with dust, sand, etc. Insert the hook into the case from below so that the protruding pins are inserted into the prepared places in the case.
When inserting the hook into the housing, do not touch the rotary knob. Then pull the ball towards you (the ball pins on the left and right sides must be in the housing cavities). The mechanism should automatically lock the hook, and the handle should turn so that a green color appears in the window on the handle, and the handle itself snaps off by about 5 mm.
Before using the system, always check that the handle window is always set to green. Otherwise, remove the hook and start assembly from the beginning.
C. The lock in the mechanism is an anti-theft device. This is not an element that affects the safety of using the system. It is safe to use the towbar without a lock if the mechanism is installed correctly in the manner described above.
D. Close the mechanism lock by turning the key half a turn clockwise. Once the key is removed, it is not possible to press and turn the handle and thus the hook cannot be removed. If you can close the mechanism with the key, it means that the ball is correctly installed. The most important indicator remains the window on the handle, which should indicate green before towing begins. Be sure to remove the key from the mechanism lock before towing. The quick release system is now ready to use.
Withdrawal.
Always unhitch the trailer before releasing the ball and any accessories that interfere with access to the ball release mechanism.
Open the mechanism lock by turning the key half a turn counterclockwise.
Hold the hook with your left hand. Push down on the knob and then (the knob will be pressed all the time) turn it fully clockwise. The handle must remain in this position.
The hook should come out of the housing under the action of gravity. Support the hook so that it does not fall to the floor.
After removing the ball from the housing, insert the supplied plug, which protects the inside of the housing from contamination.
When not in use, the hook should be stored in a safe, clean and dry place. If it is stored in a vehicle, it must be secured in such a way that it cannot move freely. A loose hook can be a threat in case of sudden braking or making any sudden maneuvers.

Stock: 0 pcs.

Engine and gearbox protection MET FORD KUGA

Stock: 0 pcs.

Kabata

Net for storage compartment - 366 x 180 mm
Shelf net with sturdy three-sided holding frame.

Stock: > 1 pcs.