All products

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 7 pin socket.

Stock: 0 pcs.

Kapota aizsargs FIAT DUCATO/PEUGEOT BOXER/OPEL MOVANO C/TOYOTA PROACE MAX/CITROEN JUMPER

Designed to protect from mechanical damages and scratches. Creates an upcoming air streams for less contamination of the wind shield and wiper blades. Aerodynamic design guarantee uplifting of an air flow as also it gives additional identity to your car. Made from firm acrylic glass, is absolutely safe to wash and don't need additional service. Deflector fixations design to exclude hood damaging and drilling.

Stock: > 1 pcs.

Vējsargi DAIHATSU MATERIA

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

Vējsargi DAIHATSU CUORE VII

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

Sānu sliekšņi HYUNDAI TUCSON

Car side steps, dedicated to the HYUNDAI TUCSON IV (NX4) 2020+ model.

Specification:
Brand: HYUNDAI TUCSON IV (NX4)
Model year: 2020+
Material: high-quality aluminum, automotive ABS + decorative stainless steel elements
Load capacity: 160 kg
New product, originally packaged.

Stock: 0 pcs.

Side steps HYUNDAI TUCSON

Car side steps, dedicated to the HYUNDAI TUCSON IV (NX4) 2020+ model.

Specification:
Brand: HYUNDAI TUCSON IV (NX4)
Model year: 2020+
Material: high-quality aluminum, automotive ABS + decorative stainless steel elements
Load capacity: 160 kg
New product, originally packaged.

Stock: 0 pcs.

Vējsargi DAIHATSU CUORE VII

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

Aizsargstienis VW T7 TRANSPORTER / FORD TRANSIT CUSTOM

Front guard bar, black color.
Product are valid according to UNECE R26/R61 legislation
Brackets OB-60-B are required to install additional headlights
-compatible with radar
-compatible with parking sensors
-compatible with camera (limited)
-compatible with tow loop
- diameter - 60 mm.
-weight- 7.2 kg.

Stock: 0 pcs.

Sānu sliekšņi IVECO DAILY

Stainless steel METEC side steps for Iveco Daily model.

Containing short step for left side and long step for right side. For 3520 mm wheelbase. For <3,5T models only.

Improves the style and practicality of your car. A great solution for easier passenger boarding and alighting.
Stainless steel (S355MC) has a very high resistance to corrosion in our weather conditions.
The kit includes assembly instructions and a mounting kit.
The products are valid in accordance with UNECE R26/R61 legislation.
Threshold weight 30 kg,
Pipe diameter 60 mm.

Stock: 0 pcs.

Sānu sliekšņi IVECO DAILY

Stainless steel METEC side steps for Iveco Daily model.

Containing short step for left side and long step for right side. For 4100mm wheelbase. For <3,5T models only.

Improves the style and practicality of your car. A great solution for easier passenger boarding and alighting.
Stainless steel (S355MC) has a very high resistance to corrosion in our weather conditions.
The kit includes assembly instructions and a mounting kit.
The products are valid in accordance with UNECE R26/R61 legislation.
Threshold weight 32 kg,
Pipe diameter 60 mm.

Stock: 0 pcs.

Aizsargstienis IVECO DAILY

SILVER Eurobar protective bar for the new Iveco Daily 2024+ model year. Unusual design and even better protection for your VAN.

The Eurobar is not only an elegant design element, but also thanks to its design - it protects the front bumper while driving or at the parking lot.

The diameter of the protective bar tube is 60 mm, made of stainless steel AISI 304 which has a very high resistance to corrosion in our weather conditions.

The kit includes assembly instructions and a mounting kit.

If you want your Renault Master to stand out from the others, while maintaining its perfect shape, you should definitely purchase our protective bar and other accessories.

Technical data:
Compatible with parking sensors - Yes,
Compatible with camera - Limited compatibility with camera,
Compatible with towing eye - Compatible with towing unit,
Product confirmity - Products are valid according to UNECE R26/R61 legislation.

Stock: 0 pcs.

Aizsargstienis IVECO DAILY

BLACK Eurobar protective bar for the new Iveco Daily 2024+ model year. Unusual design and even better protection for your VAN.

The Eurobar is not only an elegant design element, but also thanks to its design - it protects the front bumper while driving or at the parking lot.

The diameter of the protective bar tube is 60 mm, made of stainless steel AISI 304 which has a very high resistance to corrosion in our weather conditions.

The kit includes assembly instructions and a mounting kit.

If you want your Renault Master to stand out from the others, while maintaining its perfect shape, you should definitely purchase our protective bar and other accessories.

Technical data:
Compatible with parking sensors - Yes,
Compatible with camera - Limited compatibility with camera,
Compatible with towing eye - Compatible with towing unit,
Product confirmity - Products are valid according to UNECE R26/R61 legislation.

Stock: 0 pcs.

Original tow bar wiring kit

Stock: 0 pcs.

Auto sakabes āķis CITROEN C3

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis CITROEN DS 7

Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Vējsargi TOYOTA TUNDRA II

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

auto sakabes āķis Volvo S 90 / V 90

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Vējsargi VOLVO FHAero/FH16 Aero

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

Vējsargi FOTON eAumark

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.