All products

Windshield washig liquid

Stock: > 1 pcs.

Kukaiņu traipu tīrīšanas

Effective insect and tar remover Titanium Dr Marcus.
Suitable for car windows and other body parts, safe for car paint and perfect for bird droppings.
Ideal for removing tar residues from the car body.
Safe for plastic, glass and body parts.

Stock: > 1 pcs.

Paneļu tīrītājs

Panel care spray with cherry aroma.
-400ml.
Antistatic properties prevent dust from settling and leave a shiny surface for a long time.

Stock: > 1 pcs.

Paneļu tīrītājs

Panel care spray with strawberry aroma.
-400ml.
Antistatic properties prevent dust from settling and leave a shiny surface for a long time.

Stock: > 1 pcs.

Paneļu tīrītājs

Panel care spray with vanilla aroma.
-400ml.
Antistatic properties prevent dust from settling and leave a shiny surface for a long time.

Stock: 0 pcs.

Rokas vinča

ROPE WINCH WITH HOUSING.
Type - Cable winch with housing
Tractive power - 1150 kg
Rope and strap length - 6mm x 10m
Gear ratio - 4:1 / 8:1
Manufacturer - Knott
Weight - 6.4 kg

Stock: 0 pcs.

Canister 20L

Can for water with tap, 20 l.
Ideal for drivers on long journeys, also useful for camping etc.
The can is easy to use, it has a handle for carrying, a tap for pouring water.
Sizes:
Faucet length: 6 cm
Faucet diameter: 1.5 cm
Made of high density polyethylene (HDPE).

Stock: 0 pcs.

Ķēžu smērviela

K2 OFF-ROAD Chain Grease - is a highly efficient grease designed to lubricate chains and drive sprockets in off-road motorcycles and quads. Thanks to its lubricating and penetrating properties, it penetrates all gaps, protecting the chain and sprockets from premature wear. It can be used in all types of chains, x-ring, o-ring, z-ring, etc.

The biggest advantage of K2 OFF-ROAD chain grease is that after application it remains in a semi-liquid form, leaving a lubricating and protective layer. Mud, sand and other elements of the ground do not stick to this layer, and all contamination is removed with the rotation of the drive set. Thanks to this, it remains clean longer, which reduces friction between the chain and sprockets and significantly extends their service life.

The frequency of chain lubrication depends on the conditions in which the motorcycle is driven (mud, dust, sand, water, rocks, snow).

We recommend lubricating the chain before each off-road trip. However, it is important to remember that the lubricated chain should be free of dirt.

Stock: > 1 pcs.

Līme

Universal, strong glue that glues different types of surfaces.
Designed for gluing: metal, rubber, ceramics, leather, wood, paper.

Stock: > 1 pcs.

Aluminum roller lid shutter Foton Tunland G7 2019+

Aluminum roller lid shutter in black matte color. New generation, patented 'Tessera Roll+' aluminum roller lid shutter, revolutionary and futuristic design, versatility, durability, 100% handmade and with 3 years warranty.

With built-in REAR TAIL LIGHT and STOP signal.

Built-in LED strip with a button located inside the running end bar that illuminates the cargo box from the inside.

It is possible to upgrade the existing BASIC set to the SPRING or ELECTRIC version.

Special aluminum side rails (5 mm thick) with built-in 'T-SLOTS' for convenient and safe installation without additional equipment, for example: roof rails or cross bars.

Specially designed internal locking system with aluminum locking guards to prevent unauthorized access. Use the strap to unlock the Tessera Roll+ automatically.

Specially designed wider, stronger slats for 100% load safety and rubber for maximum insulation.

2 specially designed '20' drainage systems with 2 overflow systems and integrated 'ANTI-LEAF' technology, for complete drainage and water protection.

An innovative rear slat design combined with the smallest tank dimensions (26cm x 30cm) offers the advantage of increased capacity in both length and height.

Specially designed tank cover for easy access and control of the Tessera Roll+.

Next generation powder coating (Class 2) with fine texture and high weather resistance.

Simple installation in vehicles with or without bedliner. In the case of Bedliner, it can be easily installed with UNDER-rail or OVER-rail types.

Easy and quick installation without drilling holes.

Aerodynamic design that reduces fuel consumption.

Stock: 0 pcs.

Alumīnija kravas kastes žalūzijas veida vāks Foton Tunland G7 2019+

Aluminum roller lid shutter in black matte color. New generation, patented 'Tessera Roll+' aluminum roller lid shutter, revolutionary and futuristic design, versatility, durability, 100% handmade and with 3 years warranty.

Special aluminum side rails (5 mm thick) with built-in 'T-SLOTS' for convenient and safe installation without additional equipment, for example: roof rails or cross bars.

Specially designed internal locking system with aluminum locking guards to prevent unauthorized access. Use the strap to unlock the Tessera Roll+ automatically.

Specially designed wider, stronger slats for 100% load safety and rubber for maximum insulation.

2 specially designed '20' drainage systems with 2 overflow systems and integrated 'ANTI-LEAF' technology, for complete drainage and water protection.

An innovative rear slat design combined with the smallest tank dimensions (26cm x 30cm) offers the advantage of increased capacity in both length and height.

Specially designed tank cover for easy access and control of the Tessera Roll+.

Next generation powder coating (Class 2) with fine texture and high weather resistance.

Simple installation in vehicles with or without bedliner. In the case of Bedliner, it can be easily installed with UNDER-rail or OVER-rail types.

Easy and quick installation without drilling holes.

Aerodynamic design that reduces fuel consumption.

Stock: 0 pcs.

Kanna 10L

Can for water with tap, 10 l.
Ideal for drivers on long journeys, also useful for camping etc.
The can is easy to use, it has a handle for carrying, a tap for pouring water.
Sizes:
Faucet length: 5 cm
Faucet diameter: 2 cm
Made of high density polyethylene (HDPE).

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.
If the vehicle is not equipped from the factory with a pre-wired tow bar, an add-on module with part number 22040558 will be required.

Stock: > 1 pcs.

Rear bumper cover VW GOLF VIII

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: 0 pcs.

Numura rāmis

The frame of the license plate:
-from stainless steel
- two types of finish: polished steel or polished to a mirror finish (optional)
-saves high quality for many years
- frame with double license plate fixation

Stock: > 1 pcs.

Cruz slēdzeņu komplekts

4 anti-theft key locks CRUZ
Anti-theft locks: set of 4 cylinders + 2 keys.

Stock: 0 pcs.

Tow bar SUBARU Crosstrek / SUBARU XV

Stock: 0 pcs.

Door stills SKODA KODIAQ

Stock: 0 pcs.

Aizmugures bampera uzlika BMW X3

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: 0 pcs.

Aizmugures bampera uzlika SKODA KODIAQ

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: 0 pcs.