All products

Auto sakabes āķis FORD FIESTA

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Rezerves ritenis un instrumentu komplekts

RRKD4108651258017LL kpl - spare wheel - roller and tool kit.
- Size: 125/80 R17.
- Distance between bolts: 4x108x65,1 mm.
Included:
- spare wheel - stowage,
- trapezoidal jack with ratchet mechanism and a case for storing it,
- telescopic wheel wrench, retractable (up to 50 cm), with four heads: 17, 19, 21, 23 mm,
- wheel cover equipped with a Velcro fastener for attaching to the trunk floor,
- 1 pair of work gloves.

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Auto sakabes āķis HONDA e:NY1

The towbar is original, designed for a specific model. Not intended for towing a trailer!!! Max vertical 138kg
-Included is everything necessary for installation.
VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Paklājs bagāžniekā MERCEDES BENZ V-CLASS

-Suitable for options with a shelf behind the rear seat and without a shelf.
-Suitable for cars Extra Long.

Stock: 0 pcs.

Piekabes tents

Trailer tarpaulin with rack.
To pass for these models: PB75-2614/1/2.

Tarpaulin with frame

Stock: > 1 pcs.

kravas kastes reliņi

Stock: 0 pcs.

Pick-up railings

Side grab bars in sporty design in brushed black stainless steel (150 cm).
Reinforced duralumin mounts with rubber gaskets and bolt caps, connected by stainless steel pipe ᴓ 33mm. Length 150cm.

-when ordering this item, you need to make sure that they will fit in length if arcs are installed in the body.
-railing length 150 cm.

Stock: 0 pcs.

Paklāji salonā gumijas VW T 7 Multivan

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Rubber car mats HYUNDAI KONA ELECTRIC

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Paklājs bagāžniekā OPEL ASTRA (L)

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Paklājs bagāžniekā JEEP GRAND CHEROKEE WL

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Trunk mats BMW 5 (G31)

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Paklājs bagāžniekā LEXUS RZ 450e

Approximate product dimensions (cm): 96 x 149
Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Paklājs bagāžniekā HYUNDAI SANTA FE

Approximate product dimensions (cm): 109 x 136
Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mats HONDA ZR-V

Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Atbalsta riteņa turētājs

Support wheel holder
- support pipe diameter - 60 mm

Stock: > 1 pcs.

Jumta bagāžnieka platforma Peugeot Expert, Citroen Jumpy, Opel Vivaro, Toyota ProAce

Code 826448 - Roof rack platform kit.
- Length 2350 and width 1340 mm.
- For car models: Toyota Proace 2016- (wheelbase L1), Citroen Jumpy 2016 - (wheelbase L2), Peugeot Expert 2016 - (wheelbase L2), Opel Vivaro 2019- (wheelbase L2).
- Material: AISI304 - polished stainless steel.
- The products are valid in accordance with: UNECE R26/R61 legislation.
- Assembly time: 60 min.
- Attachments included.
- Maximum load 150 kg (60 kg per leg).
- Weight: 25 kg.

Stock: 0 pcs.

Rezerves ritenis

RRKD5114671559017 - spare wheel.
- Size: 155/90 R17
- Distance between bolts: 5x114,3x67.2 mm

Stock: 0 pcs.

Aizmugures bampera uzlika VW ID BUZZ/ ID BUZZ CARGO

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: 0 pcs.