All products

Auto sakabes āķis SSANGYONG / KGM ACTYON

SSANGYONG / KGM ACTYON 2025 - VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis SSANGYONG / KGM ACTYON

Semi-automatic towbar SSANGYONG / KGM ACTYON 2025 -
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Auto sakabes āķis SSANGYONG / KGM ACTYON

SSANGYONG / KGM ACTYON 2025 -Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Kartera aizsargs BMW 1(F20,F21)/2 (F22,F23,F87)/3 (F30,F31,F34,F80)/4(F32,F36 F82,F33,F83)

OE No.: 51757241814, 51757241772
For car models:
- BMW 1 (F20/F21) 2011–2019
petrol engine versions: 114i, 116i, 118i, 120i, 125i, M135i, M140i,
diesel engine versions: 114d, 116d, 118d, 120d, 125d,
- BMW 2 (F22/F23/F87)Coupe 2012–2021
petrol engine versions: 218i, 220i, 228i, 230i, M235i, M240i, Diesel engine versions: 218d, 220d, 225d,
-BMW3 (F30/F31/F80) 2011-2019
Gasoline engine versions: 316i, 318i, 320i, 328i, 330i, 335i, 340i,
Diesel engine versions: 316d, 318d, 320d, 325d, 328d, 330d, Hybrid3,
-BMW 3 (F34) Gran Turismo (GT) 2013-2021
Gasoline engine versions: 320i, 328i, 335i, 340i,
Diesel engine versions: 318d, 320d, 325d, 330d,
-BMW 4 (F32/F82/F33/F83) Coupe 2013–2020
petrol engine versions: 418i, 420i, 428i, 430i, 435i, 440i,
diesel engine versions: 418d, 420d, 425d, 430d,
-BMW 4 (F36) Gran Coupe 2014–2020
petrol, engine versions: 418i, 420i, 428i, 430i, 435i, 440i,
diesel engine versions: 418d, 425d, 430d.

Stock: 0 pcs.

Kartera aizsargs BMW 1 (F40)/ 2 (F44)/Gran Coupe, MINI Clubman II (F54), COUNTRYMAN II (F60)

OE No.: 51757402947
For car models:
- BMW 1 (F40) 2019–2024
diesel engine version 116d,
- BMW 2 (F44) Gran Coupe 2019–2024,
petrol and diesel engines,
- MINI CLUBMAN II (F54) 2015–2024,
engine versions: B36, B36C, B37, B37B, B38, B38B, B38C, B46, B46C, B47, B47B, B47D, B48, B48C, B48E,
- MINI COUNTRYMAN II (F60) 2017-2023,
engine versions: B36, B36C, B37, B37B, B38, B38B, B38C, B38X, B46, B46C, B47, B47B, B47D, B48, B48C, B48E.

Stock: 0 pcs.

Paklāji salonā gumijas RENAULT FLUENCE

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Paklājs bagāžniekā PEUGEOT 5008/ E-5008

Approximate product dimensions (cm):43 x 104
Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Paklājs bagāžniekā MG 4 XPower

Approximate product dimensions (cm): 75 x 98.
Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Amortizators

Shock absorber for leaf spring axle
Travel 250-390mm, hole 12mm

Stock: 0 pcs.

Blīve

Seal for hub
- 42x56x7mm, (for Art. No.10473)

Stock: > 1 pcs.

Microfiber polishing cloth

Stock: > 1 pcs.

Paklājs bagāžniekā JEEP CHEROKEE

Approximate product dimensions (cm): 69 x 104
Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Additional anti-sliding material prevents baggage from sliding.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Leather care product

Stock: > 1 pcs.

Ādas kopšanas līdzeklis

Preparation for skin care, 400 ml
Preparation for skin care contains a mixture of substances ensuring both the effective removal of surface contamination, and active maintenance of the components upholstery and motorcycle. ProTech center of the brand owes its effectiveness composition of active substances with highly moisturizing and softening the skin, and the addition of the UV filter protects upholstery from loss of color.

Stock: > 1 pcs.

Riepu spīdums

Tire Shine Restorer - CarPlan Ultra Tyre Shine, 500 ml.
Restores the shine of 'wet-look' tires while protecting them from general wear.

Stock: > 1 pcs.

Mains voltage converter

PT12A - Universal 230V to 12V mains voltage converter.
Equipped with a 12V car cigarette lighter socket. The reducer has overload and overvoltage protection, which protects the equipment from voltage surges in the electrical installation. Suitable for all electronic devices that are usually powered by a 12V car cigarette lighter.
Specification:
- Material: ABS plastic
- Input voltage: 230V from the network (50/60Hz)
- Output voltage: 12V
- Output power: 64W
- Maximum current (output): 6A
- Dimensions (without cables): 11.6 cm x 5.7 cm x 3.5 cm
- Power cord length: 150 cm
- Cable length with 12V socket: 45 cm
- Color: black

Stock: > 1 pcs.

Piepīpētājspraudnis

PLS34H - Plug on the lighter socket - adapter 3xUSB OC.
A great and extremely practical car charger for charging USB devices while traveling.
Equipped with 3 standard USB Type A ports with a maximum current of 3.1 A. Works from a standard 12 or 24 V car cigarette lighter (can also be used in trucks).
The charger automatically adjusts the current according to the capabilities of the device being charged, which prevents damage to the battery. Compatible with earlier USB standards. This allows you to charge two devices simultaneously via the USB interface, such as: mobile phones, smartphones, tablets, MP3 / MP4 players or GPS navigators.
The blue backlight on the front panel of the device allows you to easily connect the USB cable in low light conditions (in the dark).
The ultra-compact design will not take up much space in the car and will protrude only a few centimeters from the cigarette lighter socket. Specification:
- Material: Plastic (ABS)
- Interface: USB Type A
- Fast charging function.
- Output voltage: 5V (3.1A)
- Output voltage: 12V (1.8A)
- Power voltage: 12-24V
- Maximum charging current: 3.1A with different intensity distribution
3x USB Type A (max 3.1A)
- Dimensions: 78mm x 29mm x 44mm
- Color: Black

Stock: > 1 pcs.

Bampera aizsargi TOYOTA LAND CRUISER 250

Stainless steel rear protection bar in black color- Toyota Land Cruiser 250 - elegant styling and better protection against smaller parking collisions.

Rear protection bar mainly provides bumper protection against smaller parking collisions. In addition, the product perfectly highlights the modern styling of the car.

Protection bars, 70mm diameter and 2 mm thickness, are made of stainless steel and are polished by hand to ensure the sustainability and give additional protection for the integral elements of the vehicle.

With protection bars we add a complete mounting set and easy installation instructions for your car.

If you want to make your Toyota Land Cruiser 250 stands out from the crowd while preserving its perfect form, you should invest in our protection bars without a doubt.

Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry.

We confirm the quality of our products, providing a 24-month warranty on the polished bars and a 12 month warranty on the black bars paintwork.

Stock: > 1 pcs.

Sliekšņu trubas TOYOTA LAND CRUISER 250

Side bars from stainless steel in black colour - Toyota Land Cruiser 250 - highlit the style of your car.

Protection side bar is the best solution for people who want to emphasize the car body line. The product is not intended to be used as a step but perfectly protects threshold from mechanical damage.

Stainless steel steps with 48mm diameter and 2 mm thickness and combination with a hand-finished provide the product for years not only one season.

With the product you will find a stainless steel mounting set for your car and instructions for easy installation. Solid construction ensures static load at 115 kg, so the steps can be successfully used by adults.

If you want to make your Toyota Land Cruiser 250 stands out from the crowd while preserving its perfect form, you should invest in our protection bars without a doubt.

Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry.

We confirm the quality of our products, providing a 24-month warranty on the polished bars and a 12 month warranty on the black bars paintwork.

Stock: 0 pcs.

Piepīpētājspraudnis

PLS34E - Plug on the lighter socket - adapter QC 3.0 TYPE C 2xUSB .
A great and extremely practical car charger for charging USB devices while traveling.
Equipped with 2 standard USB ports and 1 USB C port with a maximum current of 3.1 A. Works from a standard 12 or 24 V car cigarette lighter (can also be used in trucks).
The charger automatically adjusts the current according to the capabilities of the device being charged, which prevents damage to the battery. Compatible with earlier USB standards. Allows you to charge devices several times faster than with standard USB chargers.
The blue backlight on the front panel of the device allows you to easily connect the USB cable in low light conditions (in the dark).
The ultra-compact design will not take up much space in the car and will protrude only a few centimeters from the cigarette lighter socket.
Specification:
- Material: plastic (ABS)
- Interface: USB and USB-C
- Fast charging function.
- Output voltage: 5V (3.1A)
- Output voltage: 12V (1.8A)
- Power voltage: 12-24V
- Maximum charging current: 3.1A with different intensity distribution
- 2x USB + 1x USB-C max. 3.1A
- Dimensions: 79mm x 44mm x 24mm
- Color: black

Stock: > 1 pcs.