Choose your car model

Latest news

Bike carrier

06.05.2026 Read more >

towbars

05.05.2026 Read more >

All news >

ML-SERVISS

Auto accessories store
Auto service

SIA ML-SERVISS Maskavas ielas fil.

See our location on map

Address: Mazjumpravas street 66, Riga, Latvia, LV-1063

Phone: (+371) 66116670
(+371) 29212095

Email: info@mlserviss.lv

WhatsApp (+371) 29212095

SIA ML-SERVISS filiāle "Jugla"

See our location on map

Address: Brivibas gatve street 422, Riga, Latvia, LV-1024

Phone: (+371) 29522111

Email: brivibas@mlserviss.lv

All products

Category filter:

Car brand

Product Code Price Number

Product	Code	Price
Grīdas ieklājs bagāžniekā RENAULT KANGOO Trunk insert Cargo: RENAULT KANGOO E-Tech electric 2022- Description. These cargo mats are designed and manufactured to suit your vehicle type. The mat fits perfectly to the contour of the floor and protects the floor from dirt and scratches. Thanks to the use of high quality materials, it is easy to clean it with ordinary detergents. The advantage of special cargo mats is the ideal dimensional accuracy depending on the type of vehicle. - made of high quality plastic. - non-slip surface. - ease of maintenance. - durable material. - individual fixation system. - lack of smell. Stock: 0 pcs.	GP1013111	Price: 71.00 €	Add to cart View
Paklāji salonā gumijas LEXUS RX (AL30) Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology. - High edges protects interior from getting water and mud under the mat. - No rubber smell, is acid and oil neutral. - Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface. - Fixation kit for original fixation points is not included. It is can be purchased separately. - Easy washes with water or car shampoo. Stock: > 1 pcs.	RP202415	Price: 63.00 €	Add to cart View
Paklāji salonā gumijas FORD EXPLORER PHEV Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology. - High edges protects interior from getting water and mud under the mat. - No rubber smell, is acid and oil neutral. - Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface. - Fixation kit for original fixation points is not included. It is can be purchased separately. - Easy washes with water or car shampoo. Stock: 0 pcs.	RP200643	Price: 52.00 €	Add to cart View
Paklājs bagāžniekā BMW 3 (G20)/M3 (G20) Trunk mat - especial made mat for each model using 3D floor scan technology. - It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Precise mat form prevents mat from sliding on floor surface. - Easy washes with water or car shampoo. Stock: 0 pcs.	BP102150R	Price: 42.00 €	Add to cart View
Tow bar VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used. Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident. Stock: 0 pcs.	E0801EV	Price: 485.00 €	Add to cart View
Auto sakabes āķis VW ID BUZZ VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used. Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident. Stock: 0 pcs.	E6724AV	Price: 535.00 €	Add to cart View
Auto sakabes āķis NISSAN X-TRAIL The towbar is original, designed for a specific model. -Included is everything necessary for installation. VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used. Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident. Stock: 0 pcs.	E4417DV	Price: 535.00 €	Add to cart View
Vējsargi MITSUBISHI ASX Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses. Stock: 0 pcs.	PH23379	Price: 47.00 €	Add to cart View
Vējsargi MITSUBISHI ASX Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses. Stock: 0 pcs.	PH23380+	Price: 57.00 €	Add to cart View
Jumta bagāžnieks The Dromader D6+Aero140 roof rack is designed for plain roof cars. Conventional mounting to the car roof edge. Bar length: 140 cm. Width of bar (mm): 32. Bar height (mm): 20. The rack load capacity is 75 kg, unless the car manufacturer recommends a lower value. Material: steel. Color: silver+black. Bar typ: Rectangular. Security Key: (Key can be purchased separately: Komplekt PLUS) Certificate: Pimot Mounting: using tools. Set includes: 2 steel bars + 4 support feet + assembly instruction. The roof rack for this model can be equipped with different cross bars of 'O', 'AERO', 'DYNAMIC' type. Stock: 0 pcs.	DromaderD6+Aero140	Price: 120.00 €	Add to cart View
Vējsargi JEEP AVENGER Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses. Stock: 0 pcs.	PH19134	Price: 47.00 €	Add to cart View
Vējsargi JEEP AVENGER Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses. Stock: 0 pcs.	PH19135+	Price: 57.00 €	Add to cart View
Aizmugures bampera uzlika VW ID BUZZ Rear bumper cover from stainless steel. Stock: 0 pcs.	840099	Price: 80.00 €	Add to cart View
Sliekšņu trubas VW ID BUZZ Side bars 840095 -wheelbase L1. The product is valid according to UNECE R26 / R61 legislation Material - AISI304. Pipe diameter - 60 mm. Stock: 0 pcs.	840095	Price: 325.00 €	Add to cart View
Sliekšņu trubas VW ID BUZZ Side bars with LED 840096 -wheelbase L1. The product is valid according to UNECE R26 / R61 legislation Material - AISI304. Pipe diameter - 60 mm. Stock: 0 pcs.	840096	Price: 520.00 €	Add to cart View
Aizsargstienis VW ID BUZZ BAR, code 840090, no certified. Specification: - Material: AISI304 stainless steel. - Base tube diameter: 60 mm. - Surface treatment: polished. - Complete set: instructions and necessary mounting brackets for installation. - Number of mounting points for additional headlights: 3 holes. - Weight: 8,3 kg. can be manufactured under code 84009071 and painted black. Stock: 0 pcs.	840090	Price: 465.00 €	Add to cart View
Lukturu turētājs VW ID BUZZ Lamp holder, code 840092, certified (EС certificate) Diameter - 60 mm, Material -AISI304 Surface - polished Weight - 5.3 kg Number of headlight attachment points - 3 fixed holders Stock: 0 pcs.	840092	Price: 285.00 €	Add to cart View
Dubļu aizsargi (kompl.) TOYOTA RAV 4 The mud flaps effectively protect the underbody and bumpers against excessive dirt. In addition, they also enormously reduce dangerous road chippings and water spray. Color: matte black. Installation is made on regular seats of the car. The main purpose: to protect the lower part of the car body from chipping, scratching. With such model mud flaps on your car, you will get rid of such problems as: - dirt on the bottom of the car, - intense pollution of the side of the car, starting from the front wings, - reduction of accumulated dirt or snow on the vehicle’s rapids. Stock: 0 pcs.	PK38942K00EP	Price: 113.00 €	Add to cart View
Car roof tent Car roof tent, code 20000127125. A summer adventure or a free weekend away from everyday stress? Now they will be at your fingertips! You just get into the car and take a comfortable and very functional tent with you on the roof of the car. The advantage of such a tent on the roof of a car is that while traveling or going out into nature, you can relax by stopping at a regular campsite or in any other place where vehicle parking is allowed, as well as spending the night in a tent within the dimensions of your car, and you you won't have to worry about running out of hotel or camping space in the middle of the night. The awning of the tent has an aerodynamic shape, which minimizes the noise inside the car while driving - there are no additional vibrations and noises in the car. This aerodynamic design of the tent will make you forget that it is on the roof, no matter if you have a big car or a small one. Rails are built into the base of the awning, to which buckles are attached, with which the awning is attached to the roof rack of the car. It is very easy to unfold and fold such a tent and it takes no more than 2 minutes. Just remove the cover and unlock the closing lock - thanks to its design, the tent can be easily unfolded. The proposed tent model is extremely functional, made of high-quality, waterproof and UV-resistant material. All tubes and brackets are made of high quality aluminium. The body of the tent is equipped with fasteners for special aluminum crossbars, with which you can fix it on the roof of the car. The tent is equipped with two double-layer windows and a double-layer door, which ensures good ventilation. Both windows and doors are additionally equipped with mosquito nets that prevent insects from entering. Inside the tent there is a pocket for improvised things, and on both sides of the front door there are capacious pockets for shoes. The kit includes: - Mattress made of foam rubber 8 cm thick. - Telescopic aluminum ladder with a load capacity of up to 150 kg. Tent options: - Length: 221 cm. - Width: 190 cm - Unfolded height: 102 cm. - Weight: 70 kg - Water resistance: 3000 mm - The tent is designed to comfortably accommodate 2 adults and 2 children. Stock: > 1 pcs.	20000127125	Price: 2012.00 €	Add to cart View
Vītņu fiksators Treadlock hight srenght, red MA262, 6 ml. High-strength sealant prevents loosening of parts subject to vibration, ideal for protecting stable joints in cylinder blocks and pump casings. The product will harden when placed between tightly fitting metal surfaces in the absence of air. Heat resistant up to +149°C. Initial hardening takes about 20 minutes, full - 24 hours. When used on less active metals such as zinc, aluminium, stainless steel, pure aluminium, curing time may be increased. Recommended for fastening bolts from M6 to M25 in devices that do not require frequent disassembly. For disassembly, it is necessary to heat the place to a temperature above +150°C or apply great force to break the connection. Recommended for use in places where regular disassembly of parts is not required. Tightening torque for M10 bolt: 22 Nm. Stock: > 1 pcs.	20-A89	Price: 4.00 €	Add to cart View

Grīdas ieklājs bagāžniekā RENAULT KANGOO

Trunk insert Cargo: RENAULT KANGOO E-Tech electric 2022-
Description.
These cargo mats are designed and manufactured to suit your vehicle type. The mat fits perfectly to the contour of the floor and protects the floor from dirt and scratches. Thanks to the use of high quality materials, it is easy to clean it with ordinary detergents. The advantage of special cargo mats is the ideal dimensional accuracy depending on the type of vehicle.
- made of high quality plastic.
- non-slip surface.
- ease of maintenance.
- durable material.
- individual fixation system.
- lack of smell.

Stock: 0 pcs.

GP1013111

Price: 71.00 €

Choose your car model

Car brand:

Car model:

Latest news

Bike carrier

towbars

ML-SERVISS

All products

Grīdas ieklājs bagāžniekā RENAULT KANGOO

Paklāji salonā gumijas LEXUS RX (AL30)

Paklāji salonā gumijas FORD EXPLORER PHEV

Paklājs bagāžniekā BMW 3 (G20)/M3 (G20)

Tow bar

Auto sakabes āķis VW ID BUZZ

Auto sakabes āķis NISSAN X-TRAIL

Vējsargi MITSUBISHI ASX

Vējsargi MITSUBISHI ASX

Jumta bagāžnieks

Vējsargi JEEP AVENGER

Vējsargi JEEP AVENGER

Aizmugures bampera uzlika VW ID BUZZ

Sliekšņu trubas VW ID BUZZ

Sliekšņu trubas VW ID BUZZ

Aizsargstienis VW ID BUZZ

Lukturu turētājs VW ID BUZZ

Dubļu aizsargi (kompl.) TOYOTA RAV 4

Car roof tent

Vītņu fiksators

Categories

Categories

Car accessories

Information

Contact Us