All products

Parking sensor

Stock: > 1 pcs.

Parking sensor

Stock: 0 pcs.

Parkošanās sensors

Code 02279.
Product description
The parking sensor is a device that supports parking and reversing. It works on the principle of sonar - it emits ultrasonic waves, which, when reflected from an obstacle, allow you to determine the distance between the car and the obstacle. When reversing, the device correctly detects obstacles in the vehicle's path and warns the driver with an audible signal.
The LED display shows the distance to the obstacle with an accuracy of tenths of a meter. There is also a built-in loudspeaker (buzzer), warning with the ability to completely mute the sound using a switch on the case.
Display size: 10 x 2 x 3 cm
Cable length: ~ 5 m
Parking sensor black external TRUCK. It has a mounting bracket bolted to the bumper. Can be used without support for rounded bumpers.
Sensor dimensions: 63 x 30 x 32 mm
The kit includes:
4 black 19 mm TRUCK detectors
LED display with built-in buzzer
4-touch control unit
Installation instructions
Full specification:
Working range / sensitivity
0-2.5 m
Power
12 in
Working frequency
40 kHz
Working temperature
-30 ° С - +70 ° С

Stock: > 1 pcs.

Numura rāmis ar "Nakts redzamības" kameru XD-402

License plate frame with 'Night vision' camera XD-402
Identical to the original parking sensor. Mounting diameter ø18 mm, outer diameter ø22 mm. It will fit perfectly in any car without breaking the stylistic line.

The room frame has a modern camera. The camera makes it easy and convenient to see what is happening behind the car. This perfectly solves the problem of standing in difficult places, making this maneuver a child's play. The device is connected to a monitor with a video input. The camera is completely waterproof and shockproof. The frame also has an LED well. Ability to set the camera tilt angle.

Stock: > 1 pcs.

Mob.telefona lādēšanas ierīce

Universal Mobile Phone Charger
The cable is equipped with a very strong magnet, robust connectors and a strong sheath. Includes 3 magnetic tips:
Type-C
microUSB
Lightning (iOS)
Fast charging of phones and tablets in the Quick Charge standard with a maximum intensity of 2.4A
Cable length: 1 meter
NOTE: The cable does not support data transmission.

Stock: > 1 pcs.

Aptieciņa

Made of waterproof fabric
Dimensions: 240 mm x 140 mm x 60 mm
- Adhesive tape 5m x 2,5cm 1pc
- Plaster set 14pcs
- First aid dressing 6x8cm 1pc
- First aid dressing 8x10cm 2pcs
- First aid dressing 10x12cm 1pc
- Cleansing wipe 2pcs
- Burn dressing 40x60cm 1pc
- Burn dressing 60x80cm 1pc
- Wound compress 10x10cm 6pcs
- Elastic bandage 6x400cm 2pcs
- Elastic bandage 8x400cm 3pcs
- Triangular bandage 96x96x136cm 2pcs
- First aid blanket 160x210cm 1pc
- Scissors 1pc
- Vinyl gloves 4pcs/2 pairs
- First aid instruction 1pc
Content conforms to EU

Stock: > 1 pcs.

Pedaļu uzlikas

Gas Brake Pedal Cover
Fit models with Automatic Transmission
Materials: Stainless steel + black antislip rubber, surface brushed treatment
Installation: NO drill is required. The existing rubber of the brake pedal(only brake pedal) need to be removed before installing this

Stock: 0 pcs.

Riepa Hankook ICept X

Tire Hankook ICept X

Stock: 0 pcs.

paklājs bagāžniekā RENAULT GR SCENIC

Trunk mat - especial made mat for each model using 3D floor scan technology.
- It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 7 pin socket.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 7 pin socket.

Stock: 0 pcs.

Tow bar Mercedes Lexus RX 450hL

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 7 pin socket.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 7 pin socket.

Stock: 0 pcs.

Paklāji salonā auduma

Textile floor mats - made from special auto textile material. Good protection from dust and water. Easy to clean and wash. Ads additional sound isolation and makes your interior more elegant and comfortable.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.