All products

Auto sakabes āķis KIA SORENTO

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis KIA SORENTO

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.


Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Auto sakabes āķis KIA SORENTO

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: > 1 pcs.

vinčas trose

Synthetic rope 6 mm x 15 m.
-the color is gray, with a thimble and a hook.
made from the highest quality materials.

It is a very high molecular weight polyethylene that provides maximum strength combined with minimum weight:
- maximum strength in relation to weight
- very good resistance to abrasion and material fatigue.
- good compressive strength.
- low tensile properties.
- limited heat resistance (melting point 150 ° C).
-Maximum temperature of continuous work 70 ° C.

The low elongation of the cable is very beneficial in cases of limited space for movement, where the possible dynamic force resulting from stretching can be very dangerous, for example, for winches, tugs and for mooring vessels with heavy equipment.
HMPE fiber ropes are especially recommended where light weight and ease of handling are very important, as well as in water transport for fast and safe mooring and towing.

Dimensions: 6 mm x 15 m.
Grey colour
Weight: 1.5 kg.
Material: ultra high molecular weight polyethylene.
Construction: twelve-piece weave.
Hook included: Yes
Minimum breaking load: 3600 kg.
Elongation: Max 3%.
Fiber density ratio: 0.975.
Moisture resistance: excellent.

Powerline ropes are unmatched in the European market - top quality at an attractive price!

Stock: > 1 pcs.

Vinča

Kangaroowinch K6000E-12V-STB is a robust winch in a compact body.
New in the wide range of Kangaroowinch winches! Responding to the needs of our customers, we have prepared a winch that is a compromise between small utility units and ATVs, as well as standard size units with a towing capacity of more than 4 tons.
K6000E-12V-STB is available with 12V voltage and can handle loads up to 2722 kg!
The kit includes:
-roller guide.
-universal mounting plate.
-cable control.
-steel cable 6.4 mm x 16.8 m.
- the required wiring.
- fixing screws.
-user guide.
-written guarantee.
specification:
1. Towing force 2722 kg
2. Engine 1.9 HP
3.3-speed gearbox, planetary.
4. Gear ratio 226: 1.
5. Voltage 12V.
6. Relay in a sealed 250A case.
7. Automatic brake in the drum.
8. Steel cable 6.4 mm x 16.8 m.
9. Roller guide.
10. Dimensions 380 x 115 x 190 mm.
11. Drum dimensions - 120 mm.
12, Distance between mounting bolts 168mm x 76mm.
13. Weight 14.5 kg.
14. Current consumption 12 V 0 kg - 40 A, 2722 kg - 250 A.
15. Speed ​​2722 kg - 1.2 m / min.

Stock: 0 pcs.

Vinča

Kangaroowinch K4500 is our most powerful winch mainly for ATVs - for extreme use!
Kangaroowinch K4500 with steel cable is a compact electric winch mainly designed for ATVs and ATV/UTV vehicles.

It has a well-sealed 3.9 HP engine and a 2-speed planetary gearbox, with a gear ratio of 271:1, resulting in a pulling power of over 2000 kg.
The K4500 is a great choice for ATVs, ATVs, UTVs, boats.

The standard equipment of the winch includes:

steel cable with hook
roller guide,
cable management,
wireless control,
waterproof relay,
mounting plate,
mounting screws,
electrical cables,
user manual,
2 year warranty.

Specification:
1 Pulling force 2040 kg
2 3.9 hp engine
3 2-speed planetary gearbox
4 Ratio 271:1
5 Voltage 12V
6 relay closed complex 300A
7 Brake self-locking gear
8 Rope 6.5 mm x 15 m
9 Roller guide
10 Dimensions 350x115x120 mm
11 Drum dimensions 50 x 115 mm
12 Fixing screw step 165 x 76 mm
13 Weight 12.1 kg + 1.55 mounting plate

Stock: > 1 pcs.

ķēdes riepām

KB-240
Set: 2 pcs.
- 16 mm
-TÜV / GS
-for cars: up to 7500 kg

255/60 R15
215/75 R15
225/75R15

235/60R16
225/65R16
205/75R16
205/80R16

225/60 R17
235/55 R17
205/65.5 R17

245/45 R18
255/45 R18
235/50 R18
225/55 R18

255/40 R19
225/45 R19
235/45 R19
215/55 R19

Stock: 0 pcs.

Aizmugures bampera uzlika CITROEN/TOYOTA/PEUGEOT

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: > 1 pcs.

Seat covers Peugoet Expert, Citroen Jumpy, Opel Vivaro

Stock: > 1 pcs.

Sliekšņu trubas ISUZU D-MAX

Stainless steel side bars
Designed for Isuzu D-Max 2020-.
A set of fasteners and installation instructions are included with the side bars.
Sill pipes for the car are installed in the installation locations in accordance with the instructions.
They facilitate access to the car and protect the sides of the car from mechanical damage when driving off-road.

Pipe diameter: 70 mm
Wall thickness: 2 mm

Stock: 0 pcs.

Paklājs bagāžniekā HONDA STREAM

Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Additional anti-sliding material prevents baggage from sliding.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Sliekšņu trubas ISUZU D-MAX

Stainless steel side bars black color.
Designed for Isuzu D-Max 2020-.
A set of fasteners and installation instructions are included with the side bars.
Sill pipes for the car are installed in the installation locations in accordance with the instructions.
They facilitate access to the car and protect the sides of the car from mechanical damage when driving off-road.

Pipe diameter: 76 mm
Wall thickness: 2 mm

Stock: 0 pcs.

Sliekšņu trubas ISUZU D-MAX

Stainless steel side bars
Designed for Isuzu D-Max 2020-.
A set of fasteners and installation instructions are included with the side bars.
Sill pipes for the car are installed in the installation locations in accordance with the instructions.
They facilitate access to the car and protect the sides of the car from mechanical damage when driving off-road.

Pipe diameter: 76 mm
Wall thickness: 2 mm

Stock: 0 pcs.

Side steps ISUZU D-MAX

Stock: 0 pcs.

Side steps ISUZU D-MAX

STAINLESS STEEL SIDE STEPS WITH CHECKER PLATE
Dedicated stainless steel bars Ford Transit 2019-.
Made of highest quality hand polished stainless steel - assembled in a factory-made mounting hole.
Side protection bars emphasize a visual design and facilitate getting in the car. They protect door sills from mechanical damages during off-road journeys.

Bar diameter: 70 mm
Wall thickness: 2 mm

Stock: 0 pcs.

Under engine cover MERCEDES BENZ A-klasse, B-klasse

Stock: 0 pcs.

Paklāji salonā gumijas Mercedes GLE II C167

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Paklāji salonā gumijas Ford Tourneo Custom

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Aizsargstienis ISUZU D-MAX

Code D-MAX-L2070-05-B.
Front bar black color for ISUZU D-MAX.
This product has an EU CERTIFICATE, which allows it to be used throughout the EU, as well as pass vehicle inspection without having to remove it.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.

Aizsargstienis ISUZU D-MAX

Code D-MAX-L2070-05.
Front bar for ISUZU D-MAX.
This product has an EU CERTIFICATE, which allows it to be used throughout the EU, as well as pass vehicle inspection without having to remove it.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.