All products

sintētiskā vilkšanas skava

The More 4x4 soft shackle is made of the strongest Dyneema SK75 fiber. Compared to a traditional steel shackle, a soft shackle is a safe solution, especially in the event of a broken belt or kinetic rope. It enables the safe connection of two or more ropes. Thanks to the use of a protective sleeve, the shackle is protected against damage, which extends its life.

Technical data:
- 11mm thick
- Breaking strength 14.4 tons

Stock: > 1 pcs.

Auto sakabes āķis BMW X4 (G02)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.



VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis BMW X4 (G02)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.


Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Auto sakabes āķis BMW X4 (G02)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.


Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: > 1 pcs.

Auto sakabes āķis BMW 5 (G30)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.


Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Auto sakabes āķis BMW 5 (G30)

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: > 1 pcs.

Auto sakabes āķis FORD PUMA

VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis FORD PUMA

Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Auto sakabes āķis FORD PUMA

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Papildlukturis LED W-Light IMPULSE I

Code 1605-NS3841.
W-Light Impulse I - is a low-profile spotlight with a frameless diffuser. The Impulse is ideal for installation in tight spaces and on unobtrusive equipment such as on or behind the front grille. The auxiliary lamp has versatile mounting options, it has a long mounting cable that makes it easy to install.
More information:
• 12 5W Osram LEDs
• Luminous flux 7560 lm, measured brightness 5600 lm
• Luminous flux - 1 lux at 360 m
• Hue 5000 Kelvin
• Power consumption: 3.4 A at 13.7 V
• wire 220 cm
• 2-pin DT plug
• Approvals R112, R10
• Reference number 30
• Approved for road transport
Sizes:
• Length: 360 mm
• Width: 70 mm
• Height: 32.5 mm
• 5 year warranty

Stock: > 1 pcs.

Plāksnes turētāja montāžas komplekts

Code 1605-3032
Mounting kit for stand, 20 pcs.
The kit includes:
- 20 stainless steel screws for fixing the plate,
-2 screws for fixing a plated number plate,
- 2 white caps for screw heads.

Stock: > 1 pcs.

Lampu turētājs

Code 1605-3011
Headlamp holder.
Attached behind the license plate, black.

Stock: > 1 pcs.

Papildlukturis

Code 1605-NS7 LEDA
LED-KAUGTULI 9-36V, 1605-1605-NS7 LEDA is a modern additional high beam floodlight. Equipped with TIR optical system, which means total internal reflection - all light is effectively reflected and directed before it leaves the reflector. With this floodlight, you will get more efficient road illumination and minimize light loss!
Dimensions:
diameter - 180 mm,
thickness - 65 mm,
height - 191 mm, including the bracket,
Voltage - 9-36V
Power - 60W (12x5W LED)
Brightness - 5400 lm
Throw length - 380 m (1 lux)
Image: combined, light (wide and oblong)
Aluminium case
Ref. thirty
ECE R112 / R7 / R10 certificate
IP68 (waterproof / dustproof)
Weight - 1225 g
3 years warranty

Stock: 0 pcs.

DT kabelis Hane

Code 1605-N8K202
DT plug with cable.
Description
• Consists of 2 cables - with a DT plug and with a corresponding DT plug
• Total length 0.5 m
• wire 2x0.75 mm²
• ADR approved

Stock: > 1 pcs.

Papildlukturis LED W-Light IMPULSE II

Code 1605-NS3842.
The aditional LED light W-Light Impulse II is a low-profile floodlight that features a frameless diffuser. Impulse is ideal for tight fitting spaces and inconspicuous installations such as or behind the front grille. Versatile mounting options. The floodlight comes with a long power cord for easy installation.
Additional Information:
• 18 5W Osram LEDs
• Luminous flux 7560 lumens, measured 5600 lumens
• Hue 5000 Kelvin
• 1 lux at 409 m
• Power consumption: 5.3 A @ 13.7 V,
• cord 220 cm
• 2-pin DT plug
• Approvals R112, R10
• Reference number 37.5
• Approved for road transport
Dimensions:
• Length: 528 mm
• Width: 70 mm
• Height: 32.5 mm
• 5 year warranty

Stock: > 1 pcs.

vinčas trose

CodePLNE10X25KP
Synthetic rope with thimble.
Length: 25 m
Diameter: 10 mm
Blue colour
Minimum breaking load: up to 8200 kg
Any hook can be used. The synthetic rope is made of very high molecular weight polyethylene, which provides strength in relation to the load. The cable is resistant to abrasion, wear, moisture and chemicals.
Additional characteristics:
Elongation: max 3%
Fiber density ratio: 0.975 (mobile)
Melting point: 150 ° C
Heat resistance: Max. continuous working temperature 70 ° C

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.
-designed for all vehicles that have an electric preparation for the installation of a tow bar.
Suitable for car models:
- TOYOTA Yaris 04.2020.-
- TOYOTA Yaris Hybrid 04.2020.-
- TOYOTA Yaris Cross 04.2021.-
- TOYOTA Yaris Cross Hybrid 04.2021.-
- MAZDA 2 Hybrid 03.2022.-

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 7 pin socket.
-designed for all vehicles that have an electric preparation for the installation of a tow bar.
Suitable for car models:
- TOYOTA Yaris 04.2020.-
- TOYOTA Yaris Hybrid 04.2020.-
- TOYOTA Yaris Cross 04.2021.-
- TOYOTA Yaris Cross Hybrid 04.2021.-
- MAZDA 2 Hybrid 03.2022.-

Stock: 0 pcs.

Original tow bar wiring kit

Stock: 0 pcs.

Original tow bar wiring kit

Stock: 0 pcs.