All products

Aditional LED light

Code: 1605-NS1010
High beam with dimensions.
Voltage: 9-36V
4x10W Osram LED
Total flux (lm): 3520 lm
Number of LEDs: 4 (4 LEDx10W Osram).
Power consumption: 40W
- aluminum body,
- IP68.
- three options of fasteners and an anti-vibration mount included.
- Deutsch connector.
-cable 500 mm.
-diode marker lamp (daylight) with a power of 6 W.

Length: 245mm
Width: 103mm
Height: 72mm
3 year warranty.
- for connection it is necessary to use a set of wires 1605-WK007.

Stock: > 1 pcs.

Akumulatora / metināšanas kabelis

Article: VUK16PUN-50M.
Wire 16 mm.
-Red.
Packing size: 50 METERS.
the cost is indicated for 1 meter.
-application- for example, to connect winch to the back.
Manufacturer:
Country: ITALY.

Stock: > 1 pcs.

Akumulatora / metināšanas kabelis

Article: VUK16-50M.
Wire 16 mm.
-THE BLACK.
Packing size: 50 METERS.
the cost is indicated for 1 meter.
-application- for example, to connect winch to the back.
Manufacturer:
Country: ITALY.

Stock: > 1 pcs.

Vinča

The K12500XT-12V is a professional “Performance Series” winch that sets the standard for durability and functionality.
Reinforced tie rods - increased overall strength, attractive design and
almost 5.7 tonnes of pulling power - real power, can handle just about anything.
-steel rope - MBL over 10 tons, easy to use.
-sealed 6 hp engine - he is not afraid of severe weather conditions.
-Steel planetary gear - precise and durable.
-reinforced drum - high durability, tested in the most difficult conditions.
- 500A waterproof relay - one of the best on the market.
-Rubberized easy-to-use remote control.
-the reliable guide does an excellent job with the appropriate direction of the cable.
Raise and turn - a comfortable clutch lever, shifting has never been easier and more reliable.
Complete with a winch you get:
- rope 10 mm x 28 m.
- Hook with strap (handsaver).
- Control box with relay.
- A set of cables.

- Cable remote control
- Mounting bolts
- User's manual
- Written guarantee

Thrust 5670 kg
- motor 6 kv
- gear ratio 262: 1
-voltage 12 V or 24 V
-electromagnetic relay 500A
-brake machine in the drum
- rope 10 mm and length 28 m
- dimensions 574 mm x 170 mm x 198 mm
- drum dimensions 63 mm x 224 mm
- weight 32 kg
-speed 0 kg - 7.8 m / min. 5670 kg - 1.8 m / min.
- it is recommended to use position CZ0001.

Stock: > 1 pcs.

Vinča

The Kangaroowinch K13000-12V winch is a reinforced version of the best-selling K12000.
The model is equipped with very good seals and a modified relay box - reinforced, tighter and with better cable routing - you will not find it in competitors' winches!
The winch is equipped with a 6.5 HP serial sealed motor, a very precise brush holder and a long rotor with the best torque. Advanced, modern technical solutions allow you to effectively work with a winch with a power consumption of no more than 415 A at full load!

A box with a built-in 500A HD sealed relay is located above the motor. If you want to move it to another location, it will only take a few minutes.
In addition, Kangaroowinch has fitted its winch with a steel cable with a thimble, terminated as standard with a sturdy hook with protection. The rope is wound on a sturdy roller guide.
A robust friction brake is responsible for maintaining the load, and a robust three-stage planetary gearbox made entirely of reinforced steel will provide years of trouble-free operation.

We recommend the Kangaroowinch K13000-12V winch for emergency vehicles, off-road recreation and utility services.

The winch kit includes:
-steel rope with thimble, hook and manual switch,
-roller guide.
-control by cable.
-wireless control-panel.
- fixing screws.
-box with relay.
-user's manual.

specification
- towing force 5907 kg
- Engine 6.5 HP
- 3-speed planetary gearbox.
- Gear ratio 265: 1.
- Voltage 12 V or 24 V.
- relay 500A.
- Automatic brake in the drum.
- Steel cable 9.5 mm x 27 m.
- roller guide.
- Dimensions 546mm x 160mm x 218mm.
- Drum dimensions 64 mm x 226 mm.
- The distance between the fixing screws is 254 mm x 114.3 mm.
- Weight 40 kg.
-Current consumption 12V 0kg - 80A, 5907kg - 415A, 24V 0kg - 45A. 5907x - 210A.
- Speed ​​0 kg - 6.8 m / min 5907 kg - 1.5 m / min.

Stock: > 1 pcs.

Parkošanās sensors

Code 01565.
A parking sensor 01565 is a device that helps you park your vehicle. It works on the principle of sonar - it emits ultrasonic waves, which, being reflected from the obstacle, allow you to determine the distance between the car and the obstacle. When reversing, the device correctly recognizes obstacles in the path of the car and warns the driver with a sound signal.
The LED display shows the distance to the obstacle with an accuracy of tenths of a meter. It also has a built-in loudspeaker (buzzer), with the ability to completely mute the sound with a switch on the case.
Display size: 10 x 2 x 3 cm
Cable length: ~ 5 m.
The kit includes:
-4 black detectors.
-LED display with built-in buzzer
-4 touch control unit
- a saw for drilling holes in the bumper.
-installation instructions.
Full specification:
Working range / sensitivity -0-2.5 m
Power supply-12V.
Working frequency -40 kHz.
Working temperature -30 ° C - + 70 ° C.
Mounting diameter - 22 mm.

Stock: 0 pcs.

Parkošanās sensors

Code 01576.
Parking sensor kit with buzzer.
Product description-
-4 black detectors (sensors),
-sound buzzer.
-special drill for drilling holes in the bumper.
-installation instructions.
The buzzer can work in 3 sound modes: high, low and completely muted, the mode can be changed with a switch on the case.
A parking sensor is a device that helps you park your vehicle.
It works on the principle of sonar - it emits ultrasonic waves, which, being reflected from the obstacle, allow you to determine the distance between the car and the obstacle.
When reversing, the device correctly detects obstacles in the vehicle's path and warns the driver with an audible signal.
The sensors in the 'GOLD' version are smaller than the standard ones and have a sealed connector on the cable, thanks to which we can disconnect the sensors from the car when installing or removing the bumper.
Full specification:
Working range / sensitivity -0-2.5 m.
Power - 12V
Working frequency is 40 kHz.
Working temperature -30 ° С - + 70 ° С.
Mounting diameter-18mm.
Weight 0.734 kg.

Stock: 0 pcs.

Parkošanās sensors

Code 01567.
Parking sensor kit with buzzer.
Product description-
-4 black detectors (sensors),
-sound buzzer.
-special drill for drilling holes in the bumper.
-installation instructions.
The buzzer can work in 3 sound modes: high, low and completely muted, the mode can be changed with a switch on the case.
A parking sensor is a device that helps you park your vehicle. It works on the principle of sonar - it emits ultrasonic waves, which, being reflected from the obstacle, allow you to determine the distance between the car and the obstacle. When reversing, the device correctly detects obstacles in the vehicle's path and warns the driver with an audible signal.
Full specification:
Working range / sensitivity -0-2.5 m.
Power - 12V
Working frequency is 40 kHz.
Working temperature -30 ° С - + 70 ° С.
Mounting diameter-22mm.
Weight 0.734 kg.

Stock: > 1 pcs.

Antena

Antenna lenght: 34cm
Cable lenght: 2,1m
Windscreen antenna
Built-in amplifier

Stock: > 1 pcs.

Antena

Mast lenght: 20cm

Adapters: 5 mm. 6mm.

Stock: 0 pcs.

Antena

Antenna lenght: 40cm

Cable lenght: 3m

Diameter: 5mm

Stock: > 1 pcs.

Antena

Antenna lenght: 40cm

Cable lenght: 3m

Diameter: 5mm

Built-in amplifier

Stock: > 1 pcs.

Pneimatiskā pistole

Air blow gun with hose and tee included.
It is used to remove various types of contamination with a jet of compressed air.
The small diameter of the gun tip allows you to remove dirt even from small holes and crevices, which makes the kit a very useful tool in the work of various services or mechanics.
Maximum pressure 13 kg / cm2 (13 atm)
1/4 inch connector
Included:
- pistol
- tee
- hose 5 meters.

Stock: 0 pcs.

Velosipēda pārvalks

DRESCO 5252001 - PROTECTIVE COVER FOR 2 BIKES - BLACK.
Waterproof coating for improved protection from rain, dust, dirt, snow and heat.
Elasticated hem with hook-and-eye closure.
Excellent abrasion resistance.
Dimensions: 150 x 74 x 122 cm
Weight: 900 g
Material - polyester.

Stock: 0 pcs.

Dubļu aizsargi LANDROVER RANGE ROVER VELAR

The mud flaps effectively protect the underbody and bumpers against excessive dirt. In addition, they also enormously reduce dangerous road chippings and water spray.
Color: matte black.
Installation is made on regular seats of the car.
The main purpose: to protect the lower part of the car body from chipping, scratching.
With such model mud flaps on your car, you will get rid of such problems as:
- dirt on the bottom of the car,
- intense pollution of the side of the car, starting from the front wings,
- reduction of accumulated dirt or snow on the vehicle’s rapids.

Stock: 0 pcs.

Aizmugures bampera uzlika VW T6

Do you often load purchases, luggage, building materials or travel with your dog?
Then, such an accessory is very necessary for you.
The rear bumper cover 2/35975 is the perfect solution for your vehicle as it has both protective functions and looks great as a decorative element.
Resistant to weather conditions (temperature -40 ° C / + 50 ° C) and visits to a car wash.
Made of polished stainless steel.
Thanks to cleaning, its surface scales perfectly between the strong chrome and the deep matte layer.
The edge of the bumper is also closed in the trim through a specially shaped bend.
It is secured with double-sided tape that runs along all edges of the overlay.
Attention!
The product must be glued neatly, as it is impossible to repeat the installation after a single fixing.
Once installed, you can easily load and remove luggage, and the scratched element now covers the exclusive accessory.
You will receive the cover in a sturdy package with step-by-step assembly instructions. and 3M degreasing material. The kit also includes an Autosol tube (5 ml) - polishing and refurbishing stainless steel. The excellent formula of the preparation provides the steel surface with a durable gloss without scratches and a durable protective layer.

✔️ Gives the car an exclusive character and unique appearance.

Stock: 0 pcs.

Auto sakabes āķis BMW X5

303485600001 - production of WESTFALIA.
Towbar on BMW X5
- G05 including M-Sport 08 / 2018-.
- BMW X7 G07 2019-.
Quick-release, vertical ball mount on the key. Invisible bumper cutout.
Loads:
- the mass of the towed trailer is 3500 kg.
- vertical load -140 kg.
- weight of the towbar 26 kg.
-When installing the towbar, a full-time 13 pin electrician is required under the number 21020535.

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Sliekšņu trubas VOLVO XC 60

Stainless steel side bars with checker plate steps- VOLVO XC 60 2014-2017
A mounting kit and installation instructions are included with the side bars.
Bar diameter: 76 mm
Wall thickness: 2 mm

Stock: 0 pcs.

Original tow bar wiring kit

Stock: 0 pcs.