Informācija par sīkdatņu izmantošanu.
Šī vietne izmanto sīkdatnes, lai uzlabotu lietošanas pieredzi un optimizētu tās darbību.
Turpinot lietot šo mājas lapu, Jūs piekrītiet sīkdatņu lietošanai SIA ML-SERVISS tīmekļa vietnē.
Lasīt vairāk
Approximate product dimensions 39 x 76 (cm): Trunk mat - especial made mat for each model using 3D floor scan technology. SEAT ALHAMBRA II 2010 - 2020 7-seater (3rd row of seats folded)
VOLKSWAGEN SHARAN II 2010 - 2022 7-seater (3rd row of seats folded) 7 vietas (3. sēdekļu rinda nolocīta) - It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Precise mat form prevents mat from sliding on floor surface. - Easy washes with water or car shampoo.
Black roller blinds for AUDI Q5 2017-2024 model. The use of folding roller blinds allows you to protect the luggage compartment from excessive sunlight. It also covers the contents of the trunk, reducing the risk of theft of the items inside. - color black -material: high-quality aluminum cassette and wear-resistant PVC-coated canvas
Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology. - High edges protects interior from getting water and mud under the mat. - No rubber smell, is acid and oil neutral. - Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface. - Fixation kit for original fixation points is not included. It is can be purchased separately. - Easy washes with water or car shampoo.
Dodge RAM 1500 DS 2008 / 2019 Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
JAC T8 PRO (2023-...) Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
Body install: 1. Fix body of the mechanism to brackets by bolts M12x25mm.
Ball fastening: 1. To install the ball in mechanism push the lever down till resistance. 2. Slip the ball into body in this way so pins if the ball will be in nests of the body. 3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism. 4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.
Ball unfastening: 1.To unfasten the ball take out the safety pin. 2.Push the lever down till resistance. 3.With fast move take out the ball. Let go the lever. It should return to initial position. 4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.
VERTICAL DETACHABLE TOWBAR Omoda 5 hybrid (2025-...) Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
VERTICAL DETACHABLE TOWBAR Jaecoo 5 / E5 (2025-...) Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
Body install: 1. Fix body of the mechanism to brackets by bolts M12x25mm.
Ball fastening: 1. To install the ball in mechanism push the lever down till resistance. 2. Slip the ball into body in this way so pins if the ball will be in nests of the body. 3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism. 4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.
Ball unfastening: 1.To unfasten the ball take out the safety pin. 2.Push the lever down till resistance. 3.With fast move take out the ball. Let go the lever. It should return to initial position. 4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.
Code SOR-R0070. Front bar with grill type protection for KIA SORENTO 2009-2012. This product has an EU CERTIFICATE, which allows it to be used throughout the EU, as well as pass vehicle inspection without having to remove it. The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests. Made of high quality stainless steel, hand polished. - Pipe diameter: 70mm - Wall thickness: 2 mm - Weight: 15,7 kg Includes mounting instructions and necessary mounting brackets.
Bonnet soundproofing with a set of fasteners. Fits car model: PEUGEOT 208 2012-2019 Specification: - High-quality replacement for the original. - Made of high-quality material. - High noise reduction and thermal insulation. Included: bonnet soundproofing and fastening clips.
Approximate product dimensions (cm): 93 x 98 Trunk mat - especial made mat for each model using 3D floor scan technology. - It is treated with a special rubber coating that prevents the movement and sliding of objects in the luggage compartment of the car on the mat. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Precise mat form prevents mat from sliding on floor surface. - Easy washes with water or car shampoo.
Designed to protect from mechanical damages and scratches. Creates an upcoming air streams for less contamination of the wind shield and wiper blades. Aerodynamic design guarantee uplifting of an air flow as also it gives additional identity to your car. Made from firm acrylic glass, is absolutely safe to wash and don't need additional service. Deflector fixations design to exclude hood damaging and drilling.
Dzinēja un ātrumkārbas aizsargs MET Ford Transit Custom 2
Ford Transit Custom II 2.0D ecoblue (2023-...) The engine compartment protection Kolchuga is made of high quality materials using modern technologies. It is based on cold-rolled steel 2mm or 3mm thick (depending on the car brand). The protection has an anti-corrosion coating. It not only protects the crankcase from physical shock, but also the entire engine compartment - from water, dust and dirt. This significantly increases the service life of belts, rollers and other parts. The protection has a unique shape that follows the shape of the underside of each car model, taking into account all its features and equipment. It is installed in the places provided by the car manufacturer, without additional drilling or welding, due to which the installation process is as simple as possible. All necessary hardware is included.
BYD Atto 2 / Atto 3 Electric, Plug-in hybrid (2/2025 - ) VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
BYD Atto 2 / Atto 3 Electric, Plug-in hybrid (2/2025 - ) Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
RCA video wireless transmiter and receiver Suitable for all RCA composite video connections. Wireless 2.4GHz transmitter/receiver group (12V for vehicle installation)
PACKAGE INCLUDED: Receiver Transmitter User Manual
