All products

Roof rack platform MB Sprinter/ VW Crafter

ROOF RACK, SET |
MERCEDES - BENZ SPRINTER 07 - L2 length, H2 height
VOLKSWAGEN CRAFTER 17 - L2 length, H2 height
MERCEDES - BENZ SPRINTER 18 - L2 length, H2 height

Weight: kg 38.9
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 4410 and width 1540mm.
Minimum no. (5) of roof fixations included.

Stock: 0 pcs.

Roof rack platform MB Sprinter

ROOF RACK, SET |MERCEDES - BENZ SPRINTER 07 - L2 length, H1 height

Weight: kg 37.4
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 3410 and width 1540mm.
Minimum no. (5) of roof fixations included.

Stock: 0 pcs.

Jumta bagāžnieka platforma VW T6

ROOF RACK, SET | VOLKSWAGEN T6 15 - WB 3400mm

Weight: kg 32
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Lenght 2710 and width 1540mm.
Minimum no. (5) of roof fixations included.
-in the set of the trunk there is a wind deflector that prevents the formation of unnecessary noise when the car is moving.
-in the back of the trunk there is a special roller to facilitate loading and unloading of long items.

Stock: > 1 pcs.

Roof rack platform VW T6

ROOF RACK, SET | VOLKSWAGEN T6 15 - WB 3000mm

Weight: kg 30.2
Material: AISI304
Surface treatment: Polished stainless steel
Fitting time: min 30
Product confirmity: Products are valid according to UNECE R26/R61 legislation.
Additional info:
Lenght 2710 and width 1540mm.
Minimum no. (4) of roof fixations included.

Stock: 0 pcs.

Fixing cable

сable fixing 500 KG
- length 4 METERS
- width 20 mm

Stock: > 1 pcs.

Turbo skaņas svilpe

Code 02228
Turbo sound 37-48mm

Stock: > 1 pcs.

Paklāji salonā auduma

Textile floor mats - made from special auto textile material. Good protection from dust and water. Easy to clean and wash. Ads additional sound isolation and makes your interior more elegant and comfortable.

Stock: 0 pcs.

Piekabes āķa gals

Special hook used for towbars of the American type.
It enables turning over, which facilitates the use on low and high towbars.
-This device uses a special mechanism that prevents the appearance of a knock when driving with a trailer.
-made to order.

Stock: 0 pcs.

Tow bar

Stock: 0 pcs.

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: > 1 pcs.

Vinča

WY0032D winch.
Engine power up to 6.6 hp and the waterproof protection of this model makes the winch often used in off-road vehicles. It is also successfully used in special cars and light trucks. The relay unit is waterproof, not integrated with the winch, which makes it easy to assemble the winch in the so-called inaccessible places. It also has the ability to mount a relay block above the winch motor. The More 4x4 PRO 17500 winch has additional protection against water and dirt in the form of drum seals with engine and gear mounts. This model uses the latest model of a winch brake based on frictional elements, created according to the decisions of American manufacturers of winches.

Technical data:
Maximum Traction: 7,954 kg (17,500 lbs)
Engine: 6.6 hp / 4.9 kW
Power Supply: DC 12V
Control: 3.7m cable, remote control, wireless remote control
Transmission: planetary, three steps
Aspect Ratio: 432: 1
Brake: automatic, integrated into the drum
Drum size: Diameter: 89 mm, Length: 228.6 mm
Rope: 28 x 12 mm
Guide: Cylindrical Roller Guide
Battery: recommended battery min. 64 Ah
Power cables: 38.5 mm2, length 183 cm
Weight: 53.0 kg
Dimensions W x D x H (with lever): 563 x 194 x 253 mm
Screw spacing: 254 x 114 mm

Stock: 0 pcs.

Numura rāmis (motociklam)

Motorcycle license plate:
  -made of stainless steel
  -high quality
  -surface optionaly
         polished to a mirror finish
  -fitable for Latvian license plate
  -Included (frame and washer from
         stainless steel and decorative screw)

Stock: 0 pcs.

Paklāji salonā auduma

Textile floor mats - made from special auto textile material. Good protection from dust and water. Easy to clean and wash. Ads additional sound isolation and makes your interior more elegant and comfortable.

Stock: 0 pcs.

Rear bumper cover TOYOTA AVENSIS

Do you often ship purchases, baggage, building materials, or travel with a dog?
✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips).
Is the rear bumper broken or damaged?
✔️ Ability to cover a damaged item.
The car is not a garage? Frequent visits to a car wash?
✔️ Protection against external factors (moisture, road salt, car wash products, etc.).
Want to enhance or highlight the look of your car?
✔️ Gives the car an exclusive character and unique appearance.
  The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture).
 This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer.
   The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank.
  Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation.
  After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory.
  You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.

Stock: > 1 pcs.

Roll bar DODGE RAM

Code RAM1500-R1976-2GR.
Roll bar for RAM 1500.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 76 mm
- Wall thickness: 2 mm
Includes mounting instructions and necessary mounting brackets.
ATTENTION!
When ordering a cargo box bar for DODGE RAM, consider its compatibility if the cargo box has a cover.

Stock: 0 pcs.

Roll bar DODGE RAM

Code RAM1500-R1976-GR.
Roll bar for RAM 1500.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 76 mm
- Wall thickness: 2 mm
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.

Side steps DODGE RAM

Stainless steel side steps with checker plate - RAM 1500 (2019 -)
Also available in black
Bar diameter: 70 mm
Wall thickness: 2 mm
STEELER® side steps - RAM 1500 - practical accessory for your car.

Steps make easier entry into the car for adults and children - in particular for higher vehicles such as pick-ups or SUVs. Thanks to solid side steps you will efficiently load the necessary things on the roof rack, and the winter snow removal from the roof will be a lot easier and more enjoyable.

Stainless steel side steps are made of 70mm diameter and 2 mm thickness bars. Installation is non-invasively, using factory mounting points, so the car keeps its original construction.

With the product you will find a stainless steel mounting set for your car and instructions for easy installation. Solid construction ensures static load at 115 kg, so the steps can be successfully used by adults.

Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry.

Stock: 0 pcs.

Side bars DODGE RAM

Stainless steel side bars with plastic steps RAM 1500 2019-
Also available in black
Bar diameter: 76 mm
Wall thickness: 2 mm

STEELER® side steps - RAM 1500 - safety and comfort.

Side steps with plastic covers provide the best grip during severe weather conditions. Plastic covers are reliable and stable when getting into the car, even during snowy winters and heavy rainfalls. In winter side steps will serve as a practical support during snow removal from the roof, and in summer they will facilitate loading equipment on the roof rack.

Stainless steel steps with 76mm diameter and 2 mm thickness and combination with a hand-finished provide the product for years not only one season.

With the product you will find a stainless steel mounting set for your car and instructions for easy installation. Solid construction ensures static load at 115 kg, so the steps can be successfully used by adults.

Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry.

Stock: 0 pcs.

Side bars DODGE RAM

Stainless steel side bars with checker plate steps RAM 1500 2019-
Also available in black
Bar diameter: 76 mm
Wall thickness: 2 mm

STEELER® side steps - RAM 1500 - a unique and practical design combined with style and elegance.

Side steps with checker plate steps are a unique and unparalleled in the world design - checker plate, invisible joint and perfectly made finish makes the product fits great with any car.

Stainless steps are made of 76mm diameter and 2 mm thickness bars and in combination with a hand-finished product provide the product for years not only one season.

With the product you will find a stainless steel mounting set for your car and instructions for easy installation. Solid construction ensures static load at 115 kg, so the steps can be successfully used by adults.

Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry.

Stock: 0 pcs.

Side bars DODGE RAM

Stainless steel side bars - RAM 1500 (2019 -)
Also available in black
Bar diameter: 76 mm
Wall thickness: 2 mm

STEELER® side bars - RAM 1500 - highlit the style of your car.

Protection side bar is the best solution for people who want to emphasize the car body line. The product is not intended to be used as a step but perfectly protects threshold from mechanical damage.

Stainless steel steps with 76mm diameter and 2 mm thickness and combination with a hand-finished provide the product for years not only one season.

With the product you will find a stainless steel mounting set for your car and instructions for easy installation. Solid construction ensures static load at 115 kg, so the steps can be successfully used by adults.

Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry.

Stock: 0 pcs.