All products

Vējsargi DAF 55 220, FA 5545

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

Vējsargi BYD ETH8

Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.

Stock: 0 pcs.

Kravas kastes tenta slēdzenes vāciņš

Right sliding plastic cap of locking system (SOT-ROLL series by Tessera4x4 accessories)

Stock: 0 pcs.

Kompozītmateriāla motora aizsargs HYUNDAI TUCSON IV / KIA SPORTAGE V

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Gabarīta lukturis LED

Marker light, right, code FT-146 P LED.
- 3-functional LED outline and marker light on a rubber foot.
- European certificate E9.
- Electromagnetic compatibility certificate – EMC.

Stock: > 1 pcs.

Gabarīta lukturis LED

Marker light, left, code FT-146 L LED.
- 3-functional LED outline and marker light on a rubber foot.
- European certificate E9.
- Electromagnetic compatibility certificate – EMC.

Stock: > 1 pcs.

Paklāji salonā gumijas FIAT 500/PANDA, FORD KA

Geyer & Hosaja producer of premium rubber car mats
Car mats are safe for human health (do not contain any harmful substances, PAH and metals, have hygienic Certificate HK/B/1319/01/2012)
Premium design and quality (ISO TS 16949:2009, ISO 9001:2008)
Precise details
Perfect custom fit
Anti-movement system
Optimal edges
Custom fixing system
Non-penetrating hanging system

Stock: 0 pcs.

Elektroinstalācijas vadu pagarinājuma komplekts

This harness kit is required when installing original Hak System harness part and serves to extend the original harness kit if the vehicle is not equipped with the original harness from the factory when the vehicle was released.
- for 7 and 13-pin wiring harnesses.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.

Elektroinstalācijas vadu pagarinājuma komplekts

This harness kit is required when installing original Hak System harness part number 21040558 and serves to extend the original harness kit if the vehicle is not equipped with the original harness from the factory when the vehicle was released.
- for 7 and 13-pin wiring harnesses.
- suitable for car model: MERCEDES VITO/ V-klasse(W447) , 2024-

Stock: > 1 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.

Gaismas atstarotājs

Rectangular light reflector, red, 94×44 mm, fixed with adhesive tape.

Stock: > 1 pcs.

Gaismas atstarotājs

Rectangular light reflector, white, 94×44 mm, fixed with adhesive tape.

Stock: > 1 pcs.

Papildlukturu LED komplekts

Bespoke vehicle integration kit for Lazer LED light installation. Custom fit for Toyota Land Cruiser 250 (2024+). Designed for use with ST4 Evolution High Performance LED Lights. Kit also includes mounting brackets and two-lamp wiring kit.
- Brackets made from high strength, UV -stable, composite material,
- Fully road-legal,
- 5-year warranty,
- Made in Britain.
SPECIFICATIONS:
- Voltage Range (DC) 10-32V
- LED Life 50,000 hours
- Weight 1.34 kg
HIGH BEAM FUNCTION:
- Total Luminous Flux 8,272 Lm
- Total Driver 'FOV' Flux 4,980 Lm
- Colour Temperature 5000K
- Power Consumption 94 Watts
- Peak Current Draw 11 Amps
- Current Draw (14.4V) 6.6 Amps
- Connector 2-Pin Superseal (+25cm Cable)
CERTIFICATION:
- IP Rating # IP68
- High Beam (E9 approval) ECE R149 - Ref: 2x 10
- EMC Certification ECE R10
- Salt Spray Test ISO 9227
- Dump Load Protection ISO 7637-2
KIT INCLUDES:
1x Grille Mounting Kit,
2x ST4 Evolution LED Lamps,
1x Two-Lamp Wiring Kit,
Installation Instructions.

Additionally required LAZER CNY-DIR-K

Stock: > 1 pcs.

Aizmugures bampera uzlika MERCEDES BENZ M-klasse(W164)

4710093 - Rear bumper trim.
- For Mercedes M-Class (W164) 2005-2011,
- Made of stainless steel (glossy finish),
- Dimensions: 89.3 / 11 cm,
- Easy installation - fixed with double-sided adhesive tape, which is located on all four edges of the bumper trim.

Stock: 0 pcs.

Urbju komplekts metālam

gold-black metal drills 1.0-13.0mm made of 4341 HSS high-speed steel, TiN coated (titanium nitride). Drills compliant with DIN 338. Cylindrical handle.
Drills designed for making through and blind holes. They have two central blades ground at an angle of 135° and grooves that effectively remove chips up the hole.
Drills coated with a TiN layer are designed especially for machining difficult-to-cut materials. The use of a TiN coating results in an increase in the hardness of the drills, allows for the acceleration of the cutting process and allows for better quality of the processed elements. The titanium nitride layer reduces the wear of the blade by reducing the friction force, and therefore extends the life of the drills.
Drills packed in a convenient plastic box for storage.
Product characteristics:
drills made of HHS 4341 high-speed steel
TiN (titanium nitride) coating
very good waste removal thanks to the ground spiral
2-step tip ground at an angle of 135°
perfectly ground cutting edge
Technical specifications:
Steel: HSS 4341
Coating: TiN
Size: 1.00 / 1.50 / 2.00 / 2.50 / 3.00 / 3.50 / 4.00 / 4.50 / 5.00 / 5.50 / 6.00 / 6.50 / 7.00 / 7.50 / 8.00 / 8.50 / 9.00 / 9.50 / 10.00 / 10.50 / 11.00 / 11.50 / 12.00 / 12.50 / 13.00 mm
Top: 2-step, ground at 135°

Stock: > 1 pcs.

Double-sided adhesive

Stock: > 1 pcs.

Electric extension cord

Stock: > 1 pcs.

Electric heater

Stock: > 1 pcs.