All products

Tow bar KIA NIRO

Options for electrical installation
- 16100571 - 7 PIN - oriģinal, 09.2016 >
- 21100571 - 13 PIN - oriģinal, 09.2016 >
- 737422 - 7 PIN - oriģinal, 09.2016>
- 747055 - 13 PIN - oriģinal, 09.2016>
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Tow bar KIA NIRO

Options for electrical installation
- 16100571 - 7 PIN - oriģinal, 09.2016 >
- 21100571 - 13 PIN - oriģinal, 09.2016 >
- 737422 - 7 PIN - oriģinal, 09.2016>
- 747055 - 13 PIN - oriģinal, 09.2016>
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Rubber car mats MAZDA 3/CX 30

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mats KIA XCEED

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mats SSANGYONG KORANDO

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Auto sakabes āķis

Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Riepa

MAXXIS WL2 Vansmart Snow 195/75 R16 107/105R winter

Stock: 0 pcs.

Tow bar FORD GALAXY

Towbar Horizontally detachable Ford Galaxy 2015-

Stock: 0 pcs.

Papildlukturis LED

The Triple-R 1000 Elite, 3rd Generation, is a high-performance auxiliary LED driving light, that leaves nothing to the imagination. Benefitting from upgraded LEDs and optics, the same as used in the company’s 2018/9 WRC lighting solutions, the Elite-3 delivers an unrivalled automotive lighting experience. The lamp develops 9,020 raw lumens and 1 lux to an astonishing 675m. With the light distribution optimised utilising the latest and most sophisticated CAD design and light simulation software, coupled with extensive testing and feedback across the road and professional motorsport sectors, there is no compromises made in regards lighting performance or reliability.
Achieving E-mark accreditation through adoption of Lazer’s dual output E-boost functionality, this is a product to be relied upon on and off-road. Measuring 400mm in length the product is versatile and well-suited to a wide range of different applications. While the distance illumination may grab the attention it is really in the mid to long-range distribution of light at the sides of the road/track where the Triple-R 1000 Elite now really stands apart. This improved distribution of light to the sides of the road is made possible in part by the combination of highly efficient LEDs, which on the one hand deliver outstanding distance illumination, and on the other, provide for the impressive spread of light left/right. Furthermore, modified highly-reflective, vacuum-metallised optics reduce the up/down spread of light when compared to the equivalent Standard Triple-R product. In turn, this means proportionately less light hitting the road directly in-front of the vehicle, particularly when the lamps are mounted low down, close to the ground.
In pursuing the goal of designing, engineering, and manufacturing the ultimate road-legal auxiliary driving light, we have left no stone unturned in the pursuit of perfection, from the distribution of light, to the carefully selected 5000 kelvin colour temperature proven to improve sharpness and definition of the road ahead, to the advanced electronics and material design which drives the high-end styling of the lamps and superior build quality, this is a product to both impress and be relied upon.
As with all Triple-R products, the Elite range has been designed and built in the UK, with an uncompromising commitment to maximising light output and reliability. Alongside a CAE optimised heatsink, an electronic thermal management system provides further confidence that the Triple-R’s light output is always maximised whatever the environmental and thermal conditions of the lamp. Anodised and powder coated, the lamp benefits from superior corrosion resistance, while a lifetime guarantee on the hard-coated polycarbonate lens, combined with a comprehensive 5-year warranty provide further reassurance for owners.
What's included:
- x1 Triple-R 1000 Elite-3 LED Lamp
- x2 Centre Mount (1114k)
- x1 Wiring and Installation Instructions .
ECE approved through dual output E-Boost technology
CAE optimised heatsink.
Electronic thermal management.
‘Unbreakable’ polycarbonate lens with hardcoat*.
Anodised aluminium heatsink provides for improved thermal dynamics (see Download section for Care Instructions).
-IP67 watertight.
Comes as standard with 70cm cable, including pre-wired male & female connectors.
-5 year warranty.
Designed & manufactured in Britain.

Voltage Range 9-32V
LED Life 50,000 hours
Weight 1420 gr
HIGH BEAM FUNCTION
Total Luminous Flux 9020 Lm
Number of High Output LEDs 8
Power Consumption 92 Watts
Current Draw (at 14.4V) 6.4 Amps
CERTIFICATION
High Beam ECE R112
ECE Reference 40
DIMENSIONS
Width 410 mm
Depth 103 mm
Height 73 mm
PHOTOMETRIC DATA
0.25 lx Line 1351 metres
0.5 lx Line 955 metres
1 lx Line 675 metres
3 lx Line 390 metres
- for connection it is necessary to use a set of wires LAZER 8226-12VSW

Stock: 0 pcs.

Režģa stiprinājumi

Linear centre mounting bracket includes A2 stainless steel hardware combined with extremely tough PA66 GF30 (glass filled nylon) ruggedised mounts. The mount fixes into the channel on the back of the Linear heatsink, and secured using M5 grub screws. Bracket orientation can be reversed in order to have the light mounted upwards or hanging down relative to the vehicle mounting point. Mounting kit includes anti-rotation features.
For use with Linear products only.

Stock: 0 pcs.

Paklāji salonā auduma

Textile floor mats - made from special auto textile material. Good protection from dust and water. Easy to clean and wash. Ads additional sound isolation and makes your interior more elegant and comfortable.

Stock: 0 pcs.

Hood deflector TOYOTA RAV 4

Designed to protect from mechanical damages and scratches. Creates an upcoming air streams for less contamination of the wind shield and wiper blades. Aerodynamic design guarantee uplifting of an air flow as also it gives additional identity to your car. Made from firm acrylic glass, is absolutely safe to wash and don't need additional service. Deflector fixations design to exclude hood damaging and drilling.

Stock: > 1 pcs.

Režģa stiprinājumi

The LAZER-1121K kit consists of a 2-mm thick stainless steel stabilizing bracket, consisting of two parts, which corresponds to the Lazer Lamps series of Triple-R or ST / T LED floodlights.
The stabilizer arm is attached to the lamp using the supplied low-profile bracket, and then secured to an additional rigid mounting location on your vehicle, thereby reducing vibration, stress and movement, which can affect some lighting installations.
Length: 130 mm - 230 mm

Stock: > 1 pcs.

Lazer gaismas kliedētājs

The amber lenses for the Triple-R range of lights alters the standard 5000 kelvin colour temperature to ‘selective yellow’. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
Come supplied with 4x spring clips.

-not designed for lamps of the second generation, newer releases.

Stock: 0 pcs.

Aizsargstienis kravas kastē

For all trunk lids of the SOT ROLL series.
RB 407 INOX - APS 095 INOX for VW AMAROK, FORD RANGER, MITSUBISHI, TOYOTA, NISSAN, SSANGYONG.
      Protective arch in the body made of stainless steel Ø65 mm. made in accordance with the dimensions of the body of each pickup.
- Provides sustainable protection.
-improves the pickup design and makes it possible to install additional lights.
-can be equipped with a stainless steel protective grill made of pipe Ø33 mm.

Stock: 0 pcs.

Papildlukturis LED

Combination of highly efficient 3W ‘premium bin’ LEDs
Vacuum-metallised optics deliver wide spread of light
Flexible mounting options – anti-theft mounting brackets included
Sleek, low profile design facilitates installation
Electronic thermal management
‘Unbreakable’ and hardcoated polycarbonate lens*
Anodised aluminium heatsink provides for improved thermal dynamics (see Download section for Care Instructions)
ECE approved for on-road use
IP67 watertight
5 year warranty
Supplied with male/female connectors (pre-wired)
Designed & manufactured in Britain.

-Voltage Range 9-32V
-LED Life 50,000 hours
-Weight 495 gr
HIGH BEAM FUNCTION
-Total Luminous Flux 4050 Lm
-Number of High Output LEDs -12
Power Consumption 42 Watts
Current Draw (at 14.4V) 2.9 Amps
CERTIFICATION
High Beam ECE R112
ECE Reference 17.5
DIMENSIONS
Width 232 mm
Depth 62 mm
Height 40 mm
PHOTOMETRIC DATA
0.25 lx Line 563 metres
0.5 lx Line 398 metres
1 lx Line 282 metres
3 lx Line 163 metres
- for connection it is necessary to use a set of wires LAZER 8225-12VSW
during installation, an optional bracket LAZER-1124K can be used

Stock: > 1 pcs.

Roof racks

Stock: 0 pcs.

Fixing cable

Universal luggage cable.
The flexible cables are connected by a ring, which forms a so-called 'spider' that effectively secures or stabilizes the luggage on the floor of the boot.
The set includes 4 long cables 60 cm (without stretching) and a ring that connects them in the middle.
Specifications:
Cable length: 60 cm (without stretching).
Number of hooks: 8 (2 per line).
Cable thickness: approx. 5 mm.

Stock: > 1 pcs.

LED autospuldze

LED CANBUS 12SMD
- white 12V / 24V
PRODUCT DESCRIPTION-
Dimensions - 36 / 9mm (length / width).
Color - 5600 K.
LED diode - 12 x 4014.
Power consumption - 2 watts.
Voltage - 12 / 24V.
Bipolar.

Stock: > 1 pcs.

Lukturu turētājs MERCEDES BENZ ACTROS

Roof lamp holder, | GIGA roof
5 white LEDs
cable for 6 lights
6 clamp type holders
Max. width of lights 245mm
- pipe diameter: 60mm.
- weight:13,7 kg.
Installation time 60 min.(w/o elekt.)
Instructions and necessary mounting brackets.
Material AISI304 (stainless steel)
- meets the requirements of UNECE R26 / R61

Stock: 0 pcs.