All products

Sakabes āķa vāciņš

Cap for the tow bar.
- material - elastic plastic.
The cap for the towbar, which remains suspended when the trailer is hooked onto the towbar.
It's almost impossible to lose it.
A very convenient and practical thing.

Stock: > 1 pcs.

Mud flaps VW LT 35

Rear blot for commercial vehicles with a body.
  Designed for cars with single wheels at the rear.

Stock: 0 pcs.

Bagāžnieka kaste

- the tool box is installed in the cargo compartment.
- made of durable plastic.
- Lightweight and durable at the same time.
- It is compatible with a cargo insert in a body.
- opens in three positions: right, left, and the whole.
- locked with a key.
- available in black.

Dimensions: 610 x 1460 x 530 mm (width x length x height)
Capacity: 210 liters
Weight: 21 kg

Stock: 0 pcs.

Engine protection CITROEN JUMPER,FIAT DUCATO,PEUGEOT BOXER

Engine protection. Made of composite material using the most modern technologies.
Ensures the safety of the engine and its units for any shocks.
Fully protects the engine compartment from moisture, salt, snow and dirt.
Unlike metal protections, it absorbs well the impact and at the same time does not receive residual plastic deformations (dents), which subsequently will inevitably lead to damage to the engine or its units.
Protection is attached only to the supporting elements - side members, front and rear beam.

Fastening elements of protection are also fuses. With a strong dynamic impact, exceeding the strength of the side members, the protection comes unfastened and remains on the obstacle, while protecting the entire bottom of the vehicle from above above the vehicle protection from damage. In this case, the protection itself in such cases is destroyed very rarely. As a rule, it is put back using new fastening elements.
These fasteners also perform another very important task - they ensure the requirements of passive safety according to the EURO NCAP norms. With a strong frontal impact protection is detachable and allows the engine to freely go under the vehicle interior.

Stock: 0 pcs.

Rubber car mats TOYOTA CAMRY

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Rubber car mats NISSAN LEAF

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Rubber car mats CITROEN DS 7

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Rubber car mats CITROEN DS 7

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mats LEXUS UX

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Wind deflectors AUDI Q3

Stock: 0 pcs.

Wind deflectors AUDI Q3

Stock: 0 pcs.

Hood deflector RENAULT MASTER

Stock: 0 pcs.

Wind deflectors INFINITI Q30 S

Stock: 0 pcs.

Wind deflectors INFINITI Q30S

Stock: 0 pcs.

Piekabes detaļa

Modification: ZSK 783
Permissible total trailer weight: 750 kg
Permissible static vertical load-s: 75 kg
Mounted for square tube, triangular shape
Monting to the drawbar: vertically
Type of towbar: ball 50 mm

Stock: 0 pcs.

Aizsargstienis TOYOTA PROACE

Code PROACE-R1660-04.
Front bar for TOYOTA PROACE .
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 60 mm
- Wall thickness: 2 mm
- Weight:14.4 kg
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.

Aizsargstienis TOYOTA PROACE

Code PROACE-R1660-06.
Front bar for TOYOTA PROACE .
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 60 mm
- Wall thickness: 2 mm
- Weight:8.3 kg
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.

Aizsargstienis TOYOTA PROACE

Code PROACE-R1660-03.
Front bar for TOYOTA PROACE .
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 60 mm
- Wall thickness: 2 mm
- Weight:10.2 kg
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.

Sliekšņu trubas SUZUKI SX 4/S-CROSS

Code S-CROSS-R1660-R .
Side steps for SUZUKI SX4/S-CROSS .
The side stepshas been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
-Pipe diameter: 60 mm
-Wall thickness: 2 mm
- Weight: 15,5 kg
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.

Sliekšņu trubas SUZUKI SX 4/S-CROSS

Code S-CROSS-R1670-PR-02.
Side steps for SUZUKI SX4/S-CROSS .
The side stepshas been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
-Pipe diameter: 70 mm
-Wall thickness: 2 mm
- Weight: 18,8 kg
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.