All products

Kombinēta atslēga

Combination spanner series 'Propfessional'.
Made from chrome-vanadium steel by hot stamping .
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
Wear-resistant, suitable for long-term use at max loads.
Wrenches have a standard open end part.
Suitable for working with any variety of hex fasteners.
15 degrees offset wrench socket for more convenient works.
Protected from corrosion matt nickel-chromium coating.

Stock: 0 pcs.

Kombinēta atslēga

Made of the chrome-vanadium tool steel by the hot stamping method.
Has a standard open end profile and OVER DRIVE box end working profile.
Spanner heads are made with high accuracy and hardened to 39-41 HRC.
15 degrees offset of the box end profile relatively to the wrench surface for more convenient mounting works.
Wrench is protected from corrosion by the matt nickel-chromium coating.

Stock: 0 pcs.

Nocēlāju komplekts sprostgredzeņu

Used for removal and installation internal and external stop rings.
@В комплекте четыре съёмника с прямой и изогнутой конструкцией захвата.
L - 180mm.
Manufactured by cold stamping.
Material - chrome-vanadium steel.
Plastic protective handles.
Coating - phosphatizing.
Packaging - bag.

Stock: 0 pcs.

Domkrats hidrauliskis (140-300MM)

Used for lifting vehicles.
Equipped with working and carrying handles.
Equipped with safety relief valve.

Stock: 0 pcs.

Aizsargstienis SUZUKI JIMNY

Code JIMNY-R1276-03.
Front bar with grill type protection for SUZUKI JIMNY.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight: 12,1 kg
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.

Numura rāmis

The frame of the license plate:
-from stainless steel
- two types of finish: polished steel or polished to a mirror finish (optional)
-saves high quality for many years
- frame with double license plate fixation

Stock: > 1 pcs.

Numura rāmis

The frame of the license plate:
-from stainless steel
- two types of finish: polished steel or polished to a mirror finish (optional)
-saves high quality for many years
- frame with double license plate fixation

Stock: > 1 pcs.

Numura rāmis

The frame of the license plate:
-from stainless steel
- two types of finish: polished steel or polished to a mirror finish (optional)
-saves high quality for many years
- frame with double license plate fixation

Stock: > 1 pcs.

Numura rāmis

The frame of the license plate:
-from stainless steel
- two types of finish: polished steel or polished to a mirror finish (optional)
-saves high quality for many years
- frame with double license plate fixation

Stock: > 1 pcs.

Numura rāmis (motociklam)

Motorcycle license plate:
  -made of stainless steel
  -high quality
  -surface optionaly
         polished to a mirror finish
  -fitable for Latvian license plate
  -Included (frame and washer from
         stainless steel and decorative screw)

Stock: > 1 pcs.

Rubber car mats TOYOTA RAV 4

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Rubber car mats FORD TOURNEO CUSTOM

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Rubber car mats FORD TOURNEO CUSTOM

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Trunk mats SEAT IBIZA

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Paklājs bagāžniekā OPEL CROSSLAND X

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mat SEAT ARONA

Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Additional anti-sliding material prevents baggage from sliding.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Tow bar HYUNDAI KONA

Options for electrical installation.
- 16080546 - 7 PIN - oriģinal, 11.2017 >
- 26080546 - 13 PIN - oriģinal, 11.2017 >
- 737519 - 7 PIN - oriģinal, 11.2017 >
- 747203 -13 PIN - oriģinal, 11.2017 >
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Tow bar HYUNDAI KONA

Options for electrical installation.
- 16080546 - 7 PIN - oriģinal, 11.2017 >
- 26080546 - 13 PIN - oriģinal, 11.2017 >
- 737519 - 7 PIN - oriģinal, 11.2017 >
- 747203 -13 PIN - oriģinal, 11.2017 >
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Tow bar HYUNDAI KONA

Options for electrical installation.
- 16080546 - 7 PIN - oriģinal, 11.2017 >
- 26080546 - 13 PIN - oriģinal, 11.2017 >
- 737519 - 7 PIN - oriģinal, 11.2017 >
- 747203 -13 PIN - oriģinal, 11.2017 >
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: > 1 pcs.

Side steps MERCEDES BENZ GL-klasse (X166)/GLS-klasse (X166)

Stock: > 1 pcs.