All products

Tow bar ISUZU D-MAX

Options for electrical installation
- 16090506 - 7 PIN - oriģinal, 06.2012 – 02.2017
- 26090506 - 13 PIN - oriģinal, 06.2012 – 02.2017
- 737586 - 7 PIN - oriģinal, 06.2012>
- 748686 - 13 PIN - oriģinal, 06.2012>
- 735284 - 7 PIN - oriģinal, 06.2012>
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Tow bar ISUZU D-MAX

Options for electrical installation
- 16090506 - 7 PIN - oriģinal, 06.2012 – 02.2017
- 26090506 - 13 PIN - oriģinal, 06.2012 – 02.2017
- 737586 - 7 PIN - oriģinal, 06.2012>
- 748686 - 13 PIN - oriģinal, 06.2012>
- 735284 - 7 PIN - oriģinal, 06.2012>
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Quickly demountable tow bar - removable horizontally. Fast and comfortable detachment with metal handle. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Tow bar ISUZU D-MAX

Options for electrical installation
- 16090506 - 7 PIN - oriģinal, 06.2012 – 02.2017
- 26090506 - 13 PIN - oriģinal, 06.2012 – 02.2017
- 737586 - 7 PIN - oriģinal, 06.2012>
- 748686 - 13 PIN - oriģinal, 06.2012>
- 735284 - 7 PIN - oriģinal, 06.2012>
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Trunk mat VW TIGUAN

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Trunk mat VW TIGUAN

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Motorcycle tire repair kit

Stock: > 1 pcs.

Fender decorative cover

Stock: 0 pcs.

Trunk mat TOYOTA PRIUS

Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Additional anti-sliding material prevents baggage from sliding.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Rubber floor mat SUZUKI BALENO

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Rubber floor mat MERCEDES BENZ E-klasse (W213)

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Oriģinālie vadi piekabes āķim

Original tow bar wiring kit, with 13 pin socket.

Stock: 0 pcs.

Original tow bar wiring kit

Stock: > 1 pcs.

Buksēšanas trose

Towing rope 10000kg, 6 m

Stock: 0 pcs.

Rubber car mats NISSAN NAVARA

High quality rubber mats tailored to the specific car model.
Good water and mud absorbing properties, indispensable in winter.
Colour: black
Advantages:
-areas exposed to wear additionally reinforced
-perfect fit
-odourless (mild vanilla scent)
-non-slip

Stock: 0 pcs.

Rubber car mats NISSAN NV 400,OPEL MOVANO,RENAULT MASTER

High quality rubber mats tailored to the specific car model.
Good water and mud absorbing properties, indispensable in winter.
Colour: black
Advantages:
-areas exposed to wear additionally reinforced
-perfect fit
-odourless (mild vanilla scent)
-non-slip

Stock: 0 pcs.

Aditional LED light

Voltage Range: 9-32V
Voltage Range: 9-32V
LED Life: 50,000 hours
Optical Efficiency: 0.92
Weight: 3900 gr

HIGH BEAM FUNCTION:
Total Luminous Flux: 28700 Lm
Number of High Output LEDs: 28
Power Consumption: 315 W
Current Draw : 21.9 A

SIZE:
Width: 1305 mm
Depth: 103 mm
Height: 73 mm

Stock: 0 pcs.

Aditional LED light

Voltage Range: 9-32V
LED Life: 50,000 hours
Optical Efficiency: 0.92
Weight: 2460 gr
Total Luminous Flux: 16000 Lm
Number of High Output LEDs: 16
Power Consumption: 180 W
Current Draw (at 14.4V): 12,5 A
Width: 765 mm
Depth: 103 mm
Height: 73 mm

Stock: 0 pcs.

Papildlukturis LED

Voltage Range: 9-32V
LED Life: 50,000 hours
Optical Efficiency: 0.92
Weight: 1350 gr
Total Luminous Flux: 8640 Lm
Number of High Output LEDs: 8
Power Consumption: 92 Watts
Current Draw (at 14.4V): 6.4 Amps
Width: 400 mm
Depth: 103 mm
Height: 73 mm
- for connection it is necessary to use a set of wires LAZER 8225-12VSW

Stock: 0 pcs.

Papildlukturis LED

Voltage Range: 9-32V
LED Life: 50,000 hours
Optical Efficiency: 0.92
Weight: 1420 gr
Total Luminous Flux: 7200 Lm
Number of High Output LEDs: 8
Power Consumption: 90 W
Current Draw (at 14.4V): 6.25 A
Width: 400 mm
Depth: 103 mm
Height: 73 mm
- for connection it is necessary to use a set of wires LAZER 8225-12VSW

Stock: 0 pcs.

Papildlukturis LED

Voltage Range: 9-32V
LED Life: 50,000 hours
Optical Efficiency: 0.92
Weight: 780 gr
Total Luminous Flux: 3600 Lm
Number of High Output LEDs: 4
Power Consumption: 45 W
Current Draw (at 14.4V): 3.1 A
Width: 220 mm
Depth: 103 mm
Height: 73 mm
- for connection it is necessary to use a set of wires LAZER 8225-12VSW

Stock: 0 pcs.