All products

Engine, gearbox and radiator protection MET CHEVROLET AVEO

Stock: 0 pcs.

Engine, gearbox and radiator protection MET CHEVROLET AVEO

Stock: 0 pcs.

Radiator protection MET BMW X1 (E84)

Stock: 0 pcs.

Gearbox protection MET BMW 5 (E60)/(E61)

Stock: 0 pcs.

Trunk mat SAAB 9-5

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mat RENAULT FLUENCE

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mat MAZDA CX 3

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mat MAZDA CX 3

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mat MAZDA 2

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Paklājs bagāžniekā BMW 3 (F30)

Rubber trunk mat producer Rezaw-Plast, especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Rubber surface with protector designed to prevent baggage sliding, and also mat sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Trunk mats SKODA SUPERB

Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Additional anti-sliding material prevents baggage from sliding.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Trunk mats HYUNDAI TUCSON,KIA SPORTAGE

Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan technology.
- High edges protects trunk interior from getting water and mud under the mat.
- No smell, is acid and oil neutral.
- Additional anti-sliding material prevents baggage from sliding.
- Precise mat form prevents mat from sliding on floor surface.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Dzinēja, ātrumkārbas un radiatora aizsargs MET AUDI Q 7,PORSCHE CAYENNE,VW TOUAREG

Engine, gearbox and radiator protection MET AUDI Q 7,PORSCHE CAYENNE,VW TOUAREG

Stock: 0 pcs.

Engine, gearbox and radiator protection MET AUDI A 8

Stock: 0 pcs.

Engine, gearbox and radiator protection MET AUDI A 8

Stock: 0 pcs.

Hood deflector NISSAN X-TRAIL

Designed to protect from mechanical damages and scratches. Creates an upcoming air streams for less contamination of the wind shield and wiper blades. Aerodynamic design guarantee uplifting of an air flow as also it gives additional identity to your car. Made from firm acrylic glass, is absolutely safe to wash and don't need additional service. Deflector fixations design to exclude hood damaging and drilling.

Stock: 0 pcs.

Auto sakabes āķis CHRYSLER VOYAGER/GR VOYAGER,DODGE GR CARAVAN,LANCIA VOYAGER

Options for electrical installation
- 16370500 - 7 PIN - oriģinal, 04.2001 - 03.2008, Voyager, GR Voyager
- 26370500 - 13 PIN - oriģinal, 04.2001 - 03.2008, Voyager, GR Voyager
- 16500571 - 7 PIN - oriģinal, 04.2008 >, Voyager, GR Voyager
- 26500571 - 13 PIN - oriģinal, 04.2008 >, Voyager, GR Voyager
- 749000 - 7 PIN - oriģinal, 01.2096 - 02.2008, Voyager, GR Voyager, not for Stow'n Go
- 749000 - 13 PIN - oriģinal, 01.2096 - 02.2008, Voyager, GR Voyager, not for Stow'n Go
- 737240 - 7 PIN - oriģinal, 04.2008>, Voyager, GR Voyager
- 748440 - 13 PIN - oriģinal, 04.2008>, Voyager, GR Voyager
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis BMW 7 (F01)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
Options for electrical installation
- 12020523 - 7 PIN - oriģinal, 11.2008 – 02.2014
- 21020523 - 13 PIN - oriģinal, 11.2008 – 02.2014
- 12020528 - 7 PIN - oriģinal, 03.2014 >
- 21020528 - 13 PIN - oriģinal, 03.2014 >
- 737201 - 7 PIN - oriģinal, 11.2008 - 02.2014
- 748401 - 13 PIN - oriģinal, 11.2008 - 02.2014
- 737676 - 7 PIN - oriģinal, 03.2014 - 09.2015
- 747376 - 13 PIN - oriģinal, 03.2014 - 09.2015
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Auto sakabes āķis BMW 7 (F01)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
Options for electrical installation
- 12020523 - 7 PIN - oriģinal, 11.2008 – 02.2014
- 21020523 - 13 PIN - oriģinal, 11.2008 – 02.2014
- 12020528 - 7 PIN - oriģinal, 03.2014 >
- 21020528 - 13 PIN - oriģinal, 03.2014 >
- 737201 - 7 PIN - oriģinal, 11.2008 - 02.2014
- 748401 - 13 PIN - oriģinal, 11.2008 - 02.2014
- 737676 - 7 PIN - oriģinal, 03.2014 - 09.2015
- 747376 - 13 PIN - oriģinal, 03.2014 - 09.2015
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Semi-automatic towbar
Mechanism with quickly demountable ending

Body install:
1. Fix body of the mechanism to brackets by bolts M12x25mm.

Ball fastening:
1. To install the ball in mechanism push the lever down till resistance.
2. Slip the ball into body in this way so pins if the ball will be in nests of the body.
3. Let go the lever. It should return to initial position, this means correctly installed ball in the mechanism.
4. Put safety pin through lever's hole and bracket's hole. Correctly placed safety pin.

Ball unfastening:
1.To unfasten the ball take out the safety pin.
2.Push the lever down till resistance.
3.With fast move take out the ball. Let go the lever. It should return to initial position.
4.Put plug into the body. Plugs are in accessories of the towbar with quickly demountable ending.

Stock: 0 pcs.

Auto sakabes āķis BMW 7 (F01)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
Options for electrical installation
- 12020523 - 7 PIN - oriģinal, 11.2008 – 02.2014
- 21020523 - 13 PIN - oriģinal, 11.2008 – 02.2014
- 12020528 - 7 PIN - oriģinal, 03.2014 >
- 21020528 - 13 PIN - oriģinal, 03.2014 >
- 737201 - 7 PIN - oriģinal, 11.2008 - 02.2014
- 748401 - 13 PIN - oriģinal, 11.2008 - 02.2014
- 737676 - 7 PIN - oriģinal, 03.2014 - 09.2015
- 747376 - 13 PIN - oriģinal, 03.2014 - 09.2015
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.