Informācija par sīkdatņu izmantošanu.
Šī vietne izmanto sīkdatnes, lai uzlabotu lietošanas pieredzi un optimizētu tās darbību.
Turpinot lietot šo mājas lapu, Jūs piekrītiet sīkdatņu lietošanai SIA ML-SERVISS tīmekļa vietnē.
Lasīt vairāk
Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
Original tow bar wiring kit, with 13 pin socket. CITROEN JUMPER 3 (X250 MCA) Pick up, Camper, Chassis cab & Van, 07/24- FIAT DUCATO (X250 Serie 8/9) Pick up, Camper, Chassis cab & Van 07/21-01/24 FIAT DUCATO 3 (X250 MCA) Pick up, Camper, Chassis cab & Van 02/24- TOYOTA PROACE MAX I (MFY/MFQ) Pick up, Chassis cab & Van 08/24- OPEL MOVANO C (X250 MCA) Pick up, Camper,Chassis cab & Van 07/24- PEUGEOT BOXER 3 (X250 MCA) Pick up, Camper, Chassis cab & Van 07/24-
Original tow bar wiring kit, with 7 pin socket. Suitable for: CITROEN JUMPER 3 (X250 MCA) Pick up, Camper, Chassis cab & Van, 07/24- FIAT DUCATO (X250 Serie 8/9) Pick up, Camper, Chassis cab & Van 07/21-01/24 FIAT DUCATO 3 (X250 MCA) Pick up, Camper, Chassis cab & Van 02/24- TOYOTA PROACE MAX I (MFY/MFQ) Pick up, Chassis cab & Van 08/24- OPEL MOVANO C (X250 MCA) Pick up, Camper,Chassis cab & Van 07/24- PEUGEOT BOXER 3 (X250 MCA) Pick up, Camper, Chassis cab & Van 07/24-
The mud flaps effectively protect the underbody and bumpers against excessive dirt. In addition, they also enormously reduce dangerous road chippings and water spray. Color: matte black. Installation is made on regular seats of the car. The main purpose: to protect the lower part of the car body from chipping, scratching. With such model mud flaps on your car, you will get rid of such problems as: - dirt on the bottom of the car, - intense pollution of the side of the car, starting from the front wings, - reduction of accumulated dirt or snow on the vehicle’s rapids.
Round switch with red light The round 12V 20A switch with red illumination is a reliable solution for all kinds of electrical installations in vehicles and appliances. With its sleek black housing and easy-to-read backlighting, the switch is not only functional, but also aesthetically pleasing. Ideal for use in lighting and ventilation systems, as well as other systems that require quick and easy switching on and off.
Key features:
Voltage and current – supports 12V installations, with a maximum current of 20A, making it a versatile solution for many applications. LED backlighting – red backlighting makes it easy to locate the switch in the dark and indicates whether it is on. Easy installation – standard round shape and simple mounting make the switch suitable for installation in most panels. Durable construction – high quality materials ensure longevity and resistance to daily use. Elegant design – black housing and subtle red light add a modern touch to any installation.
The switch with illumination is a practical and stylish item that is ideal for both cars and other electrical projects. With reliable operation and clear ON/OFF status marking, it provides comfort and safety for use.
Alumīnija kravas kastes žalūzijas veida vāks Foton Tunland V9 2024+
Aluminum roller lid shutter in black matte color. New generation, patented 'Tessera Roll+' aluminum roller lid shutter, revolutionary and futuristic design, versatility, durability, 100% handmade and with 3 years warranty.
With built-in REAR TAIL LIGHT and STOP signal.
Built-in LED strip with a button located inside the running end bar that illuminates the cargo box from the inside.
It is possible to upgrade the existing BASIC set to the SPRING or ELECTRIC version.
Special aluminum side rails (5 mm thick) with built-in 'T-SLOTS' for convenient and safe installation without additional equipment, for example: roof rails or cross bars.
Specially designed internal locking system with aluminum locking guards to prevent unauthorized access. Use the strap to unlock the Tessera Roll+ automatically.
Specially designed wider, stronger slats for 100% load safety and rubber for maximum insulation.
2 specially designed '20' drainage systems with 2 overflow systems and integrated 'ANTI-LEAF' technology, for complete drainage and water protection.
An innovative rear slat design combined with the smallest tank dimensions (26cm x 30cm) offers the advantage of increased capacity in both length and height.
Specially designed tank cover for easy access and control of the Tessera Roll+.
Next generation powder coating (Class 2) with fine texture and high weather resistance.
Simple installation in vehicles with or without bedliner. In the case of Bedliner, it can be easily installed with UNDER-rail or OVER-rail types.
Easy and quick installation without drilling holes.
Alumīnija kravas kastes žalūzijas veida vāks Foton Tunland V9 2024+
Aluminum roller lid shutter in black matte color. New generation, patented 'Tessera Roll+' aluminum roller lid shutter, revolutionary and futuristic design, versatility, durability, 100% handmade and with 3 years warranty.
A specially designed control unit with the help of artificial intelligence, which does not require calibration for the length of the body of the trunk of each vehicle, because it is done automatically.
Soft Open/Close Function: A specially programmed system that provides a soft open/close function for smoother use. You can stop and lock the blind cover at any time using the stepless automatic locking.
Maintenance Alerts: The blind informs you through the app that the tank drain needs to be cleaned if there is a water blockage inside. As well as when it is necessary to lubricate the rails for smoother use.
Mobile app (iOS and Android).
Obstacle detection function. Tessera Roll+ is able to detect any obstacles (e.g. objects, etc.) thanks to sensors mounted on the rear bar, without using motor current. Achieve more reliable and safer protection, longer engine life and maximum weather performance.
Triple Operating System (Mobile Phone Application, Back Bar 'One Touch' Operation, Key Fob Remote Control).
The motor is tested under the most extreme conditions, mounted and protected in a central aluminum shaft (heavy duty) (direct drive system) and does not take up EXTRA SPACE in the vehicle's cargo compartment.
Specially designed remote control (2 pcs.).
With built-in REAR TAIL LIGHT and STOP signal.
Built-in LED strip with a button located inside the running end bar that illuminates the cargo box from the inside.
Special aluminum side rails (5 mm thick) with built-in 'T-SLOTS' for convenient and safe installation without additional equipment, for example: roof rails or cross bars.
Specially designed internal locking system with aluminum locking guards to prevent unauthorized access. Use the strap to unlock the Tessera Roll+ automatically.
Specially designed wider, stronger slats for 100% load safety and rubber for maximum insulation.
2 specially designed '20' drainage systems with 2 overflow systems and integrated 'ANTI-LEAF' technology, for complete drainage and water protection.
An innovative rear slat design combined with the smallest tank dimensions (26cm x 30cm) offers the advantage of increased capacity in both length and height.
Specially designed tank cover for easy access and control of the Tessera Roll+.
Next generation powder coating (Class 2) with fine texture and high weather resistance.
Simple installation in vehicles with or without bedliner. In the case of Bedliner, it can be easily installed with UNDER-rail or OVER-rail types.
Easy and quick installation without drilling holes.
Alumīnija kravas kastes žalūzijas veida vāks Foton Tunland V9 2024+
Aluminum roller lid shutter in black matte color. New generation, patented 'Tessera Roll+' aluminum roller lid shutter, revolutionary and futuristic design, versatility, durability, 100% handmade and with 3 years warranty.
The spring-assisted version of the Tessera Roll+ offers added convenience, utilizing a heavy-duty spring mechanism for easy operation. This allows users to open and close the cover with significantly less effort compared to the manual version. With the same durable aluminum construction, it offers excellent weather resistance and protection for your cargo. The spring assist ensures smooth retraction, making this an ideal option for those who need frequent access to the truck bed.
With built-in REAR TAIL LIGHT and STOP signal.
Built-in LED strip with a button located inside the running end bar that illuminates the cargo box from the inside.
Special aluminum side rails (5 mm thick) with built-in 'T-SLOTS' for convenient and safe installation without additional equipment, for example: roof rails or cross bars.
Specially designed internal locking system with aluminum locking guards to prevent unauthorized access. Use the strap to unlock the Tessera Roll+ automatically.
Specially designed wider, stronger slats for 100% load safety and rubber for maximum insulation.
2 specially designed '20' drainage systems with 2 overflow systems and integrated 'ANTI-LEAF' technology, for complete drainage and water protection.
An innovative rear slat design combined with the smallest tank dimensions (26cm x 30cm) offers the advantage of increased capacity in both length and height.
Specially designed tank cover for easy access and control of the Tessera Roll+.
Next generation powder coating (Class 2) with fine texture and high weather resistance.
Simple installation in vehicles with or without bedliner. In the case of Bedliner, it can be easily installed with UNDER-rail or OVER-rail types.
Easy and quick installation without drilling holes.
Alumīnija kravas kastes žalūzijas veida vāks Foton Tunland V9 2024+
Aluminum roller lid shutter in black matte color. New generation, patented 'Tessera Roll+' aluminum roller lid shutter, revolutionary and futuristic design, versatility, durability, 100% handmade and with 3 years warranty.
Special aluminum side rails (5 mm thick) with built-in 'T-SLOTS' for convenient and safe installation without additional equipment, for example: roof rails or cross bars.
Specially designed internal locking system with aluminum locking guards to prevent unauthorized access. Use the strap to unlock the Tessera Roll+ automatically.
Specially designed wider, stronger slats for 100% load safety and rubber for maximum insulation.
2 specially designed '20' drainage systems with 2 overflow systems and integrated 'ANTI-LEAF' technology, for complete drainage and water protection.
An innovative rear slat design combined with the smallest tank dimensions (26cm x 30cm) offers the advantage of increased capacity in both length and height.
Specially designed tank cover for easy access and control of the Tessera Roll+.
Next generation powder coating (Class 2) with fine texture and high weather resistance.
Simple installation in vehicles with or without bedliner. In the case of Bedliner, it can be easily installed with UNDER-rail or OVER-rail types.
Easy and quick installation without drilling holes.
The OFD Offroad Fabrication Rocker Track (ON/OFF) switch is a simple and reliable wiring solution for controlling additional lighting in your vehicle. Made from high-quality materials with a blue LED backlight, it’s both stylish and durable. IP67 protection ensures resistance to dust and water.
Specifications: - High quality - Backlight color: Blue - Protection rating: IP67 - Operating voltage and current: 12V–20A, 24V–10A
The OFD Offroad Fabrication Rocker Track (ON/OFF) switch is a simple and reliable wiring solution for controlling additional lighting in your vehicle. Made from high-quality materials with a blue LED backlight, it’s both stylish and durable. IP67 protection ensures resistance to dust and water.
Specifications: - High quality - Backlight color: Blue - Protection rating: IP67 - Operating voltage and current: 12V–20A, 24V–10A
The OFD Offroad Fabrication Rocker Track (ON/OFF) switch is a simple and reliable wiring solution for controlling additional lighting in your vehicle. Made from high-quality materials with a blue LED backlight, it’s both stylish and durable. IP67 protection ensures resistance to dust and water.
Specifications: - High quality - Backlight color: Blue - Protection rating: IP67 - Operating voltage and current: 12V–20A, 24V–10A
The OFD Offroad Fabrication Rocker Track (ON/OFF) switch is a simple and reliable wiring solution for controlling additional lighting in your vehicle. Made from high-quality materials with a blue LED backlight, it’s both stylish and durable. IP67 protection ensures resistance to dust and water.
Specifications: - High quality - Backlight color: Blue - Protection rating: IP67 - Operating voltage and current: 12V–20A, 24V–10A
Do you often ship purchases, baggage, building materials, or travel with a dog? ✔️ Cover for the paint of the rear bumper (mechanical damage, scratches, abrasions, chips). Is the rear bumper broken or damaged? ✔️ Ability to cover a damaged item. The car is not a garage? Frequent visits to a car wash? ✔️ Protection against external factors (moisture, road salt, car wash products, etc.). Want to enhance or highlight the look of your car? ✔️ Gives the car an exclusive character and unique appearance. The rear bumper trim Avisa is the perfect solution for your car, as it has both protective functions and looks great as a decorative element. Resistant to weather conditions (temperature -40 ° С / + 50 ° С) and visits to a car wash (moisture). This is not a typical chrome strip because it is made of polished stainless steel. Thanks to cleaning, its surface scales perfectly between hard chrome and a deep matte layer. The bent edge of the bumper is also closed in the cover plate through a specially profiled bend. It is fixed using a double-sided tape, which is located on all four edges of the plank. Attention! The product must be glued carefully, since it is impossible to repeat the installation after a single fixation. After installing the lining, you can easily load and remove luggage, and the scratched item now covers an exclusive accessory. You will receive the case in a sturdy packaging with assembly instructions 'Step by Step'. and 3M degreasing material. The kit also includes a tube Autosol (5 ml) - polishing and updating stainless steel. The excellent formula of the preparation provides a steel surface with a long-lasting gloss without scratches and a strong protective layer.
Enhance Your Off-Road Performance – 30mm Wheel Spacers for Volkswagen Amarok and Ford Ranger. Unlock better handling, stability, and a more aggressive stance with OFD’s 30mm wheel spacers – precision-engineered for Volkswagen Amarok and Ford Ranger models using M12x1.5 lug nuts. Crafted from high-strength 6061-T6 aluminum and finished in corrosion-resistant black anodizing, these spacers deliver the durability and reliability off-roaders demand. The 30mm thickness offers increased track width for better clearance and improved traction, without compromising wheel alignment. With a laser-engraved OFD logo and included lug nuts, it’s the perfect upgrade for serious off-road performance.
Specifications: - Material: Solid 6061-T6 aluminum - Bolt Pattern: 6x139.7 mm - Center Bore: 93.1 mm - Thickness: 30 mm - Thread Pitch: M12x1.5 - Finish: Black anodized for corrosion resistance - Branding: OFD laser-engraved logo
Included in the Box: - 2 x Wheel Spacers - 12 x Lug Nuts
Note: - Compatible only with Volkswagen Amarok and Ford Ranger models using M12x1.5 lug nuts.
Original tow bar wiring kit, with 13 pin socket. Especially for trailers with LED lights PDC OFF: Switch on the board Charging electric kit: 22400509 Constans voltage: Yes Activation: NIE Module: AFC LED + CC Connection: Rear
