All products

Auto sakabes āķis CITROEN C 3,PEUGEOT 208

Options for electrical installation
- 12500599 - 7 PIN - oriģinal, 12.2016 >
- 21500599 - 13 PIN - oriģinal, 12.2016 >
- 737031 - 7 PIN - oriģinal, 12.2016>
- 748668 - 13 PIN - oriģinal, 12.2016>
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Tow bar HONDA CIVIC

Options for electrical installation
- 16070519 - 7 PIN - oriģinal, 01.2012 – 04.2017
- 26070519 - 13 PIN - oriģinal, 01.2012 – 04.2017
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: 0 pcs.

Tow bar HONDA CIVIC

Options for electrical installation
- 16070519 - 7 PIN - oriģinal, 01.2012 – 04.2017
- 26070519 - 13 PIN - oriģinal, 01.2012 – 04.2017
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.


Quickly demountable tow bar - removable horizontally. Fast and comfortable detachment with metal handle. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Tow bar HONDA CIVIC

Options for electrical installation
- 16070519 - 7 PIN - oriģinal, 01.2012 – 04.2017
- 26070519 - 13 PIN - oriģinal, 01.2012 – 04.2017
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.




Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation.
ATTENTION !!! Electro installation kit not included.

Stock: 0 pcs.

Tow bar ISUZU D-MAX

Options for electrical installation
- 16090506 - 7 PIN - oriģinal, 06.2012 – 02.2017
- 26090506 - 13 PIN - oriģinal, 06.2012 – 02.2017
- 737586 - 7 PIN - oriģinal, 06.2012>
- 748686 - 13 PIN - oriģinal, 06.2012>
- 735284 - 7 PIN - oriģinal, 06.2012>
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.

Stock: 0 pcs.

Rubber car mats SEAT MII,SKODA CITIGO,VW UP!

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Rubber car mats HYUNDAI I 30,KIA CEED/PRO CEED

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Rubber car mats HONDA CIVIC

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Rubber car mats FIAT PANDA

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Rubber car mats CITROEN JUMPY,TOYOTA PROACE,FIAT SCUDO,PEUGEOT EXPERT

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Rubber car mats CITROEN DS 5

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: 0 pcs.

Rubber car mats PEUGEOT 208/2008

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology.
- High edges protects interior from getting water and mud under the mat.
- No rubber smell, is acid and oil neutral.
- Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface.
- Fixation kit for original fixation points is not included. It is can be purchased separately.
- Easy washes with water or car shampoo.

Stock: > 1 pcs.

Brake pads

Stock: > 1 pcs.

Auto sakabes āķis BMW X5 (E70)/(F15)/X6 (F16)

The towbar is original, designed for a specific model.
-Included is everything necessary for installation.
Options for electrical installation
- 12020523 - 7 PIN - oriģinal, 03.2007 > E70, E71
- 21020523 - 13 PIN - oriģinal, 03.2007 > E70, E71
- 12020525 - 7 PIN - oriģinal, 11.2013 > F15, F16
- 21020525 - 13 PIN - oriģinal, 11.2013 > F15, F16
- 12020535 - 7 PIN - oriģinal, 11.2018 > G05
- 21020535 - 13 PIN - oriģinal, 11.2018 > G05
- 737234 - 7 PIN - oriģinal, 11.2013 > F15, F16
- 748438 - 13 PIN - oriģinal, 11.2013 > F15, F16
- MP2D1 - 7 PIN - universal.
- MPWH3S-G13 - 13 PIN universal.



VERTICAL DETACHABLE TOWBAR
Mounting of the detachable towbar

A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position.
B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing.
While inserting the detachable towbar into the housing keep your hands away from the operation handle.
Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS !
Always check the indicator window in the operation handle shows`green` every time before you start towing.
If this is not the case, remove the towbar and start the mounting process again at point `A`.
C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above.
D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.

Removal of the detachable towbar system.
A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable.
B. Unlock the towball by turning the key anti-clockwise half a turn.
C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position.
D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor.
E. After removal of the towball the plastic weather cap should be attached to the housing.
F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.

Stock: > 1 pcs.

Brake pads

Stock: > 1 pcs.

Brake pads

Stock: > 1 pcs.

Brake pads

Stock: > 1 pcs.

Brake pads

Stock: > 1 pcs.

Brake pads

Stock: > 1 pcs.

Brake pads

Stock: > 1 pcs.