Informācija par sīkdatņu izmantošanu.
Šī vietne izmanto sīkdatnes, lai uzlabotu lietošanas pieredzi un optimizētu tās darbību.
Turpinot lietot šo mājas lapu, Jūs piekrītiet sīkdatņu lietošanai SIA ML-SERVISS tīmekļa vietnē.
Lasīt vairāk
Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan technology. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Additional anti-sliding material prevents baggage from sliding. - Precise mat form prevents mat from sliding on floor surface. - Easy washes with water or car shampoo.
Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan technology. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Additional anti-sliding material prevents baggage from sliding. - Precise mat form prevents mat from sliding on floor surface. - Easy washes with water or car shampoo.
Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan technology. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Additional anti-sliding material prevents baggage from sliding. - Precise mat form prevents mat from sliding on floor surface. - Easy washes with water or car shampoo.
Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan technology. - High edges protects trunk interior from getting water and mud under the mat. - No smell, is acid and oil neutral. - Additional anti-sliding material prevents baggage from sliding. - Precise mat form prevents mat from sliding on floor surface. - Easy washes with water or car shampoo.
Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor scan technology. - High edges protects interior from getting water and mud under the mat. - No rubber smell, is acid and oil neutral. - Surface with protector designed to prevent boots sliding, and also mat sliding on floor surface. - Fixation kit for original fixation points is not included. It is can be purchased separately. - Easy washes with water or car shampoo.
Auto sakabes āķis AUDI A 3,VW GOLF V/GOLF PLUS/GOLF VI
The towbar is original, designed for a specific model. -Included is everything necessary for installation. Options for electrical installation - 12500559 - 7 PIN - oriģinal, 05.2003 -01.2013 Audi, VW - 21500559 - 13 PIN - oriģinal, 05.2003 -01.2013 Audi, VW - 736784 - 7 PIN - oriģinal, 05.2003 - 07.2012 Audi - 749084 - 13 PIN - oriģinal, 05.2003 - 07.2012 Audi - 737481 - 7 PIN - oriģinal, 05.2003 - 07.2012 Audi - 747181 - 13 PIN - oriģinal, 05.2003 - 07.2012 Audi - 736975 - 7 PIN - oriģinal, 10.2003 - 11.2012 VW - 748875 - 13 PIN - oriģināls, 10.2003 - 11.2012 VW - MP2D1 - 7 PIN - universal. - MPWH3S-G13 - 13 PIN universal.
VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
Auto sakabes āķis AUDI A 3,VW GOLF V/GOLF PLUS/GOLF VI
The towbar is original, designed for a specific model. -Included is everything necessary for installation. Options for electrical installation - 12500559 - 7 PIN - oriģinal, 05.2003 -01.2013 Audi, VW - 21500559 - 13 PIN - oriģinal, 05.2003 -01.2013 Audi, VW - 736784 - 7 PIN - oriģinal, 05.2003 - 07.2012 Audi - 749084 - 13 PIN - oriģinal, 05.2003 - 07.2012 Audi - 737481 - 7 PIN - oriģinal, 05.2003 - 07.2012 Audi - 747181 - 13 PIN - oriģinal, 05.2003 - 07.2012 Audi - 736975 - 7 PIN - oriģinal, 10.2003 - 11.2012 VW - 748875 - 13 PIN - oriģināls, 10.2003 - 11.2012 VW - MP2D1 - 7 PIN - universal. - MPWH3S-G13 - 13 PIN universal.
Quickly demountable tow bar - removable horizontally. Fast and comfortable detachment with metal handle. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
Auto sakabes āķis AUDI A 3,SKODA OCTAVIA,VW BORA/GOLF IV
The towbar is original, designed for a specific model. -Included is everything necessary for installation. Options for electrical installation - GP2-150 - 7 PIN - universal.
VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
The towbar is original, designed for a specific model. -Included is everything necessary for installation. Options for electrical installation - 737040 - 7 PIN - oriģinal, 06.2008> - 748740 - 13 PIN - oriģinal, 06.2008> - MP2D1 - 7 PIN - universal. - MPWH3S-G13 - 13 PIN universal.
VERTICAL DETACHABLE TOWBAR Mounting of the detachable towbar
A. Before installing the detachable towball you must be sure it is in the `set` position. This can be seen from the color in the indicator window of the operation handle: this should be `red`. If this is not the case then push in the operation handle firmly to the end and then rotate the Handle - while keeping it pushed in - fully clockwise to its end position. The handle now will remain in this (`set`) position. B. Remove the plastic weather cap and ensure that the housing is clear of any mud, gravel, road debris, i.e. Insert the detachable towbar into housing and move it up until the triangular pins are set into the corresponding recesses (left & right) of the housing. While inserting the detachable towbar into the housing keep your hands away from the operation handle. Next, pull the ball itself towards you while holding the towbar in the above position, i.e. triangular pins resting into their corresponding recesses (left/right) in the housing. The system then will automatically lock and the operation handle will turn to indication green and will also pop out about 5 mm. CHECK THIS ! Always check the indicator window in the operation handle shows`green` every time before you start towing. If this is not the case, remove the towbar and start the mounting process again at point `A`. C. The key operated lock is an anti theft device only. It is not involved with safe attachment Of the detachable towbar. It is safe to tow with the key operated lock unlocked as long as the towbar is correctly attached as described above. D. Lock the towball by turning the key clockwise half a turn. Remove the key, after this the operation handle can no longer be pushed in and not be turned enough to activate the mechanism. If the towbar can be locked this also confirms that the towbar is correctly installed. It is essential that the indicator in the handle shows `green` prior to towing. Remember to remove the key from the lock before starting your journey. The towbar is then ready to be used.
Removal of the detachable towbar system. A. Always remove/unhitch the trailer prior to removing the towball, and remove any accessories if they obstruct the locking system as well as detaching the safety cable. B. Unlock the towball by turning the key anti-clockwise half a turn. C. Hold the detachable towball with the left hand. Push the operation handle fully inwards and then whilst holding it pushed in turn the handle fully clockwise to its end position. The handle will remain in this position. D. Let the detachable towball slide out of the housing while holding it in your hand to prevent it from falling onto the floor. E. After removal of the towball the plastic weather cap should be attached to the housing. F. When not in use keep the towball in safe, clean and dry place. If kept in the vehicle this must be located such that it is not free to enter the passenger compartment in the event of heavy braking, heavy cornering or in case of an accident.
The towbar is original, designed for a specific model. -Included is everything necessary for installation. Options for electrical installation - 737040 - 7 PIN - oriģinal, 06.2008> - 748740 - 13 PIN - oriģinal, 06.2008> - MP2D1 - 7 PIN - universal. - MPWH3S-G13 - 13 PIN universal.
Quickly demountable tow bar - removable horizontally. Fast and comfortable detachment with metal handle. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
The towbar is original, designed for a specific model. -Included is everything necessary for installation. Options for electrical installation - 737040 - 7 PIN - oriģinal, 06.2008> - 748740 - 13 PIN - oriģinal, 06.2008> - MP2D1 - 7 PIN - universal. - MPWH3S-G13 - 13 PIN universal.
Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
Quickly demountable tow bar - removable horizontally. Fast and comfortable detachment with metal handle. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
Tow bar with screw fixation. Tow bar constructed accordingly all European and car producer standards. Installs accordingly car producer mounting places. Kit contains all necessary parts for installation. ATTENTION !!! Electro installation kit not included.
Paklāji salonā gumijas CHRYSLER VOYAGER,DODGE CARAVAN
Rubber car mats. Salon car mats are made especially for each car's model. It has a flange by perimeter, which do not allow a dirt or mud to get out of mats. They are elastic and does not have any smell. Easily cleaned and remains flexible under temperature extremes. There are black, gray and beige colors available. Anti-slip and fixation system are provided.
Kartera aizsargs MET FIAT CROMA,OPEL VECTRA/SIGNUM
Сode 16.0548 Crankcase protection is a necessary part of every car. It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle. The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters. Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects. The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot. The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime. Powder coating applied using a special technology, has a high resistance to damage and prevents corrosion. In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving. The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance. The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners. 'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength. Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.
Сode 03.0285 Crankcase protection is a necessary part of every car. It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle. The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters. Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects. The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot. The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime. Powder coating applied using a special technology, has a high resistance to damage and prevents corrosion. In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving. The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance. The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners. 'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength. Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.
Сode 22.0598 Crankcase protection is a necessary part of every car. It is a design designed to prevent mechanical damage to components and assemblies located at the lowest points of the vehicle. The crankcase protection is designed taking into account the individual characteristics of the vehicle. Its design depends on the type of body, engine size, gearbox type, configuration and other parameters. Crankcase protection 'Sheriff' will reliably protect the engine compartment of your car from damage when hitting sharp and hard objects. The “Sheriff” crankcase protection design protects the engine compartment from moisture and dirt and provides for the presence of metal fenders that act as a boot. The 'Sheriff' crankcase protection design provides for the presence of openings for blowing the engine, which ensures the stability of the temperature regime. Powder coating applied using a special technology, has a high resistance to damage and prevents corrosion. In places where the protection contacts the body, rubber shock absorbers are provided, which minimize noise and vibration when the vehicle is moving. The Sheriff crankcase protector has openings for oil drain and oil filter replacement, which reduces the operating costs of car maintenance. The development of Sheriff crankcase protectors is carried out taking into account the individual design features of the car, installation is carried out only on standard holes using high-quality fasteners. 'Sheriff' crankcase protection is made by stamping, which improves its technical characteristics and structural strength. Sheriff crankcase protection, distributing air flows, makes the car more streamlined and increases traction.
Wind deflectors HEKO for side doors are an important element of car accessories. They enable natural exchange of air inside the vehicle. They prevent windows from fogging on rainy days, since they allow ventilation of the car interior. When the window is open, wind deflectors protect the driver against the direct impact of gushes of wind. They decrease dirt on side windows, enabling better view in wing mirrors. They make it possible to open windows even during heavy rain or snow. They highlight the style line of the vehicle. The picture presented here shows an example of fitted side wind deflector. Heko is the leading Polish producer of wind deflectors for passenger cars, buses.
