4x4 and Pick-up accessories

Pick-up railings

Side grab bars in sporty design in brushed black stainless steel (150 cm).
Reinforced duralumin mounts with rubber gaskets and bolt caps, connected by stainless steel pipe ᴓ 33mm. Length 150cm.

-when ordering this item, you need to make sure that they will fit in length if arcs are installed in the body.
-railing length 150 cm.

Stock: > 1 pcs.

Foam rubber seal

Stock: 0 pcs.

pick-up railings

-when ordering this item, you need to make sure that they will fit in length if arcs are installed in the body.
-railing length 80 cm.

Stock: > 1 pcs.

Kravas kastes virsbūve Toyota Hi-lux

Commercial container designed for: Toyota Hilux (2015 -)

Designed according to individual user needs, ideal for following applications: police, fire service, energy sector, construction and many more similar professions.

Specification:

– made of aluminium
– powder coated according to the vehicle colour
– light and robust frames, weatherproof
– rustproof material
– allows a wide range of internal applications such as racks, platforms
– gas springs at each hatch
– stainless steel locks
– inner LED lights (external as option)
- allows mounting of roof racks (loading capacity of to 120kg)

Stock: 0 pcs.

Flap actuator

Stock: 0 pcs.

Rokturis ar atslēgu un mehānisms

Handle with key

Stock: 0 pcs.

Kravas kastes Tessera tenta atspere

Spring of aluminum roller lid shutter (SOT-ROLL series by Tessera4x4 accessories)

Stock: 0 pcs.

Kravas kastes ieliktnis

Loading area bedliner dedicated for VW Amarok otects loading area, e.g. against scratches and fluids.
Intended for assembly with canopies/tonneau covers/roll-covers.

Stock: 0 pcs.

Kravas kastes ieliktnis

Loading area bedliner dedicated for VW Amarok otects loading area, e.g. against scratches and fluids.
Intended for assembly with canopies/tonneau covers/roll-covers.

Stock: 0 pcs.

cargo box lock

Stock: > 1 pcs.

Kravas kastes žalūzijas veida vāks TOYOTA HI-LUX

SOT-1316-ROLL-BLACK (black) for TOYOTA HI-LUX 2016-
Roller lid-shutter. Special made (patented) perimeter profile from anodized aluminum base (thickness: 5mm), which hugs completely (100% length & width) the trunk’s rail part, for the strong and durable (not decorative) installation of all types: new or existing roll bars, side handrails and loading bars (can be easily combined with original equipment (like roll bars & protective rear
window ladder racks of: VW Amarok (Stainless steel ∅76 & Canyon), Ford Ranger (Limited & XLT & Wild Trak), Toyota Hilux (Vigo), etc.).) (Patent Numbers: WO 2014/053863 & No. 1008153 & No. 1007595).
It is launched in silver anodized aluminum as standard version (with 2 EXTRA OPTIONS: Painted in vehicle’s color code or in 'Black Matte' color).
Special designed (patented) aluminum hinges, which provide smooth, frictionless rotation and minimize stress on the Vinyl surface. For 100% security, in the flat position it is impossible the aluminum hinges to make any disengagements (special design) (Patent Number: No. 1007947).
Weatherproof (water & dust) because of its unique combination of vinyl-PVC sheet surface on the top of tough aluminum hinges (panels) that rolls along to anodize aluminum profile side rails. (Surface characteristics: waterproof & durable, fire retardant, resistant against color fade caused by the UV sunrays, superior abrasion resistance, antimicrobial & antibacterial, easy to clean).
Special designed for strong and durable use (heavy duty): of aluminum axis ∅80, reinforced duralumin fitting base & metallic bearings for axis to the housing unit and special (heavy duty) spring.
Special made roller’s saver box: by solid (one piece) galvanized steel 1.5mm, painted in black color (powder coat) and special designed in small size for bigger loading capacity in the trunk body.
Special made two drainages and two overflows, recessed drain fittings ensure rapid and complete drainage of the unit housing.
Perfect protection. Special made side rubbers seals, brushes, and 4 water channels (drainages) for the best protection from water and dust.
Multiple locking positions (We can add more locking positions per your preference).
Installation: easy and quick, with no need of drilling (installation with drilling only in cases with roll bars, side hand-rails, loading bars for maximum power).
Can be fitted in vehicles with or without bed-liner (under-rail or over-rail: the only roller lid that can be installed with over-rail version bed-liners with no need the rail part to be cut).
New high security central locking system, with new ergonomic handle and protective cap from weather conditions (made in Germany).
The strongest & durable (for heavy duty) roller lid of the global market (total weight of aluminum: 50kg).
An ideal choice in order to combine your vehicle’s trunk body either for personal use (big boot), or professional use (loading, tying, protection).
It protects the trunk and its contents from the weather conditions.
It contributes on the improvement of driving attitude, especially on high speed, as it works like a big wind-spoiler in the trunk of the pick-ups.
It offers noticeable economy in fuels.

Stock: > 1 pcs.

Traps

The AKC8003
Very effective in sand, snow or mud.
These ladders can also be used to navigate deep ditches, when climbing steep slopes, etc.
- tested and recommended by extreme riders.
- special side handles make them much easier to carry or install on the car.
- minimization of deformation under load.
- limiting wheel slip.
- specially designed to prevent slipping in extreme conditions.
A must-have accessory for off-road vehicles.
The set includes 2 pieces, plus a practical and convenient bag.
Dimensions: 110x32x7cm.
Weight: 7 kg / pair.

Stock: 0 pcs.

Snorkelis Toyota Land Cruiser J150

Snorkel - air intake Toyota Land Cruiser J150, 2009+.
Designed for engines: 3.0 D4-D / right side.
Snorkel - the air intake of an SUV, is the main protection of the vehicle engine from flooding while wading, perfectly protects the car engine from water sucking into the combustion chamber.
The air intake kit contains flexible parts and hardware.
Made of special ABS plastic, impact and abrasion resistant.
The kit includes all the elements required for assembly.

Stock: 0 pcs.

Snorkelis Toyota Land Cruiser J100 / Lexus LX470

Snorkel - air intake Toyota Land Cruiser J100/Lexus LX470, 1998-2007.
Designed for engines: 4.5L, 4.7L V8 petrol, 4.2L diesel / right side.
Snorkel - the air intake of an SUV, is the main protection of the vehicle engine from flooding while wading, perfectly protects the car engine from water sucking into the combustion chamber.
The air intake kit contains flexible parts and hardware.
Made of special ABS plastic, impact and abrasion resistant.
The kit includes all the elements required for assembly.

Stock: 0 pcs.

Snorkelis Toyota Hilux

Snorkel - air intake Toyota Hilux VIGO, 2006 - 2015.
Designed for: 3.0L, 4.0L V6 Petrol / Diesel / right side.
Snorkel - the air intake of an SUV, is the main protection of the vehicle engine from flooding while wading, perfectly protects the car engine from water sucking into the combustion chamber.
The air intake kit contains flexible parts and hardware.
Made of special ABS plastic, impact and abrasion resistant.
The kit includes all the elements required for assembly.

Stock: 0 pcs.

Snorkelis Toyota Land Cruiser 120

Snorkel - air intake Toyota Land Cruiser 120, 12/2002-9/2009.
Designed for engines: 4.0V6 Petrol, 3.0L Diesel/ right side.
Snorkel - the air intake of an SUV, is the main protection of the vehicle engine from flooding while wading, perfectly protects the car engine from water sucking into the combustion chamber.
The air intake kit contains flexible parts and hardware.
Made of special ABS plastic, impact and abrasion resistant.
The kit includes all the elements required for assembly.

Stock: 0 pcs.

Snorkelis MITSUBISHI PAJERO

Snorkel - MITSUBISHI PAJERO 2000-2006
Designed for: 3.5 B, 3.2 D, t / l right side
A snorkel, also known as an SUV air intake, is the basic protection for a vehicle's engine against water entering the engine when driving off-road.
We offer a wide range of snorkeling for special off-road vehicle models.

Air intake mounting kits contain flexible mounts, but the snorkeling unit may need to be treated and the vehicle's air filter closed.
Made of special ABS plastic, it is impact resistant.
The set includes all the elements necessary for assembly.

Stock: 0 pcs.

Snorkelis VW Amarok

Snorkel - Volksvagen Amarok 2011-
Designed for: 2.0 D, t / l right side
A snorkel, also known as an SUV air intake, is the basic protection for a vehicle's engine against water entering the engine when driving off-road.
We offer a wide range of snorkeling for special off-road vehicle models.

Air intake mounting kits contain flexible mounts, but the snorkeling unit may need to be treated and the vehicle's air filter closed.
Made of special ABS plastic, it is impact resistant.
The set includes all the elements necessary for assembly.

Stock: 0 pcs.

Riteņa distanceris

Spacer 6x139.7x35 mm, 12x1.5.
Designed for Toyota Hilux 2005-2012, 2012-
Toyota LC 120 200-2009
Toyota LC150 2009-2013
Toyota LC150 2013-2017
Toyota LC150 2017-

Technical data:
- thickness: 35 mm.
- central hole: 108 mm.
- screw: 12 mm.
- thread pitch: 1.5 mm.
- color is red.
  Price for 1 piece.
Products with the code DYS022 - 6x139.7x30mm - Nissan: Patrol Y60, Patrol Y61, Pathfinder 97-05r, Terrano, Navara D21, Navara D22, PickUp.
Products with the code DYS024- Land Rover.

Stock: 0 pcs.

Cilpas stiprinajuma plāksne

Shackle holder (earrings, staples) for the bumper - vertical.
Earring holder - suitable for steel bumpers of different manufacturers with a screw spacing of 90 x 55 mm.

Additional Information:
- The distance between the screws: 90 x 55 mm.
- Allows mounting brackets: 3/4 '4.75 T.
- Material: sheet metal, 10 mm, painted with Raptor coating.
- Version: upright hanging bow.

Stock: > 1 pcs.