4x4 and Pick-up accessories

Kravas kastes būda

Toyota Hilux REVO hard top, aluminum - More 4x4
Fits: Toyota Hilux REVO, 2015+, Double Cab
Allowable hard surface dynamic load: 70kg
Permissible static load of hard surface: 250kg
Weight: 65 kg

The Toyota Hilux Revo MorE 4x4 hardtop is made of 3 mm thick aluminum and is a self-supporting structure. Its top edge and strong corner posts provide a solid base for installing roof racks or tents on hard surfaces, which is often not possible with composite structures due to their poor strength. To make it easier to set up racks or roof tents on hard surfaces, we have provided rails with mounting holes that allow you to adjust the screw elements up and down.

The More 4x4 hardtop is equipped with three hinged flaps, each of which is raised by actuators and equipped with key locks.

In addition, the structure is equipped with a series of flange seals for splash resistance, and additionally the point where the hardtop meets the vehicle bed is sealed with 2mm micro rubber.

The More 4x4 hardtop is attached to the side of the Toyota Hilux Revo truck using the clamps included with the product and does not require drilling holes in the vehicle body.

The product is painted in two layers using the powder painting technique.

Toyota Hilux Revo hardtop can be supplemented with additional accessories:
- Roof rack for More 4x4 B050 hard roof
- AS040 locker/storage compartment
- Tiltable ceiling shelf AS042

Stock: 0 pcs.

Alumīnija kravas kastes žalūzijas veida vāks Toyota Hilux Revo 2016+

Aluminum roller lid shutter in black matte color. New generation, patented 'Tessera Roll+' aluminum roller lid shutter, revolutionary and futuristic design, versatility, durability, 100% handmade and with 3 years warranty.

Special aluminum side rails (5 mm thick) with built-in 'T-SLOTS' for convenient and safe installation without additional equipment, for example: roof rails or cross bars.

Specially designed internal locking system with aluminum locking guards to prevent unauthorized access. Use the strap to unlock the Tessera Roll+ automatically.

Specially designed wider, stronger slats for 100% load safety and rubber for maximum insulation.

2 specially designed '20' drainage systems with 2 overflow systems and integrated 'ANTI-LEAF' technology, for complete drainage and water protection.

An innovative rear slat design combined with the smallest tank dimensions (26cm x 30cm) offers the advantage of increased capacity in both length and height.

Specially designed tank cover for easy access and control of the Tessera Roll+.

Next generation powder coating (Class 2) with fine texture and high weather resistance.

Simple installation in vehicles with or without bedliner. In the case of Bedliner, it can be easily installed with UNDER-rail or OVER-rail types.

Easy and quick installation without drilling holes.

Aerodynamic design that reduces fuel consumption.

Stock: > 1 pcs.

No name

Stock: 0 pcs.

Pickup truck bed ladder

Footrest -ladder.
The footrest is intended for simplification of access to a car body.
The footrest folds down, for additional support, the design on the right side is equipped with a handle. Thanks to microrubber washers, it does not damage the car sunroof when using it.
The structure is made of steel with a thickness of 2 and 4 mm, treated with a two-layer powder coating.

Stock: > 1 pcs.

Pick-up railings

-when ordering this item, you need to make sure that they will fit in length if arcs are installed in the body.
-railing length 105 cm.

Stock: > 1 pcs.

Pick-up railings

Side grab bars in sporty design in brushed black stainless steel (150 cm).
Reinforced duralumin mounts with rubber gaskets and bolt caps, connected by stainless steel pipe ᴓ 33mm. Length 150cm.

-when ordering this item, you need to make sure that they will fit in length if arcs are installed in the body.
-railing length 150 cm.

Stock: > 1 pcs.

pick-up railings

-when ordering this item, you need to make sure that they will fit in length if arcs are installed in the body.
-railing length 80 cm.

Stock: > 1 pcs.

Kravas kastes virsbūve Toyota Hi-lux

Commercial container designed for: Toyota Hilux (2015 -)

Designed according to individual user needs, ideal for following applications: police, fire service, energy sector, construction and many more similar professions.

Specification:

– made of aluminium
– powder coated according to the vehicle colour
– light and robust frames, weatherproof
– rustproof material
– allows a wide range of internal applications such as racks, platforms
– gas springs at each hatch
– stainless steel locks
– inner LED lights (external as option)
- allows mounting of roof racks (loading capacity of to 120kg)

Stock: 0 pcs.

Flap actuator

Stock: 0 pcs.

Kravas kastes žalūzijas veida vāks TOYOTA HI-LUX

SOT-1316-ROLL-BLACK (black) for TOYOTA HI-LUX 2016-
Roller lid-shutter. Special made (patented) perimeter profile from anodized aluminum base (thickness: 5mm), which hugs completely (100% length & width) the trunk’s rail part, for the strong and durable (not decorative) installation of all types: new or existing roll bars, side handrails and loading bars (can be easily combined with original equipment (like roll bars & protective rear
window ladder racks of: VW Amarok (Stainless steel ∅76 & Canyon), Ford Ranger (Limited & XLT & Wild Trak), Toyota Hilux (Vigo), etc.).) (Patent Numbers: WO 2014/053863 & No. 1008153 & No. 1007595).
It is launched in silver anodized aluminum as standard version (with 2 EXTRA OPTIONS: Painted in vehicle’s color code or in 'Black Matte' color).
Special designed (patented) aluminum hinges, which provide smooth, frictionless rotation and minimize stress on the Vinyl surface. For 100% security, in the flat position it is impossible the aluminum hinges to make any disengagements (special design) (Patent Number: No. 1007947).
Weatherproof (water & dust) because of its unique combination of vinyl-PVC sheet surface on the top of tough aluminum hinges (panels) that rolls along to anodize aluminum profile side rails. (Surface characteristics: waterproof & durable, fire retardant, resistant against color fade caused by the UV sunrays, superior abrasion resistance, antimicrobial & antibacterial, easy to clean).
Special designed for strong and durable use (heavy duty): of aluminum axis ∅80, reinforced duralumin fitting base & metallic bearings for axis to the housing unit and special (heavy duty) spring.
Special made roller’s saver box: by solid (one piece) galvanized steel 1.5mm, painted in black color (powder coat) and special designed in small size for bigger loading capacity in the trunk body.
Special made two drainages and two overflows, recessed drain fittings ensure rapid and complete drainage of the unit housing.
Perfect protection. Special made side rubbers seals, brushes, and 4 water channels (drainages) for the best protection from water and dust.
Multiple locking positions (We can add more locking positions per your preference).
Installation: easy and quick, with no need of drilling (installation with drilling only in cases with roll bars, side hand-rails, loading bars for maximum power).
Can be fitted in vehicles with or without bed-liner (under-rail or over-rail: the only roller lid that can be installed with over-rail version bed-liners with no need the rail part to be cut).
New high security central locking system, with new ergonomic handle and protective cap from weather conditions (made in Germany).
The strongest & durable (for heavy duty) roller lid of the global market (total weight of aluminum: 50kg).
An ideal choice in order to combine your vehicle’s trunk body either for personal use (big boot), or professional use (loading, tying, protection).
It protects the trunk and its contents from the weather conditions.
It contributes on the improvement of driving attitude, especially on high speed, as it works like a big wind-spoiler in the trunk of the pick-ups.
It offers noticeable economy in fuels.

Stock: > 1 pcs.

Snorkelis Toyota Land Cruiser J150

Snorkel - air intake Toyota Land Cruiser J150, 2009+.
Designed for engines: 3.0 D4-D / right side.
Snorkel - the air intake of an SUV, is the main protection of the vehicle engine from flooding while wading, perfectly protects the car engine from water sucking into the combustion chamber.
The air intake kit contains flexible parts and hardware.
Made of special ABS plastic, impact and abrasion resistant.
The kit includes all the elements required for assembly.

Stock: 0 pcs.

Snorkelis Toyota Land Cruiser J100 / Lexus LX470

Snorkel - air intake Toyota Land Cruiser J100/Lexus LX470, 1998-2007.
Designed for engines: 4.5L, 4.7L V8 petrol, 4.2L diesel / right side.
Snorkel - the air intake of an SUV, is the main protection of the vehicle engine from flooding while wading, perfectly protects the car engine from water sucking into the combustion chamber.
The air intake kit contains flexible parts and hardware.
Made of special ABS plastic, impact and abrasion resistant.
The kit includes all the elements required for assembly.

Stock: 0 pcs.

Snorkelis Toyota Hilux

Snorkel - air intake Toyota Hilux VIGO, 2006 - 2015.
Designed for: 3.0L, 4.0L V6 Petrol / Diesel / right side.
Snorkel - the air intake of an SUV, is the main protection of the vehicle engine from flooding while wading, perfectly protects the car engine from water sucking into the combustion chamber.
The air intake kit contains flexible parts and hardware.
Made of special ABS plastic, impact and abrasion resistant.
The kit includes all the elements required for assembly.

Stock: 0 pcs.

Snorkelis Toyota Land Cruiser 120

Snorkel - air intake Toyota Land Cruiser 120, 12/2002-9/2009.
Designed for engines: 4.0V6 Petrol, 3.0L Diesel/ right side.
Snorkel - the air intake of an SUV, is the main protection of the vehicle engine from flooding while wading, perfectly protects the car engine from water sucking into the combustion chamber.
The air intake kit contains flexible parts and hardware.
Made of special ABS plastic, impact and abrasion resistant.
The kit includes all the elements required for assembly.

Stock: 0 pcs.

Riteņa distanceris

Spacer 6x139.7x35 mm, 12x1.5.
Designed for Toyota Hilux 2005-2012, 2012-
Toyota LC 120 200-2009
Toyota LC150 2009-2013
Toyota LC150 2013-2017
Toyota LC150 2017-

Technical data:
- thickness: 35 mm.
- central hole: 108 mm.
- screw: 12 mm.
- thread pitch: 1.5 mm.
- color is red.
  Price for 1 piece.
Products with the code DYS022 - 6x139.7x30mm - Nissan: Patrol Y60, Patrol Y61, Pathfinder 97-05r, Terrano, Navara D21, Navara D22, PickUp.
Products with the code DYS024- Land Rover.

Stock: 0 pcs.

Hardtop canopy

hard top
– fiberplastic body,
– rear door,
– Windows rear and front,
– SLAM lock system,
– inner light,
– Painted in the color of the car.

Stock: 0 pcs.

Kravas kastes ieliktnis

Bedliner - over rail
- made of polyethylene with enhanced resistance
- protects the cargo space from scratches and liquids
- Not for the assembly of bodywork / flaps / shutters
- quick and easy installation

Stock: 0 pcs.

Kravas kastes ieliktnis

Loading area bedliner dedicated for Toyota Hilux (Double Cab).
Made of polyethylene of enhanced resistance, protects loading area, e.g. against scratches and fluids.
Intended for assembly with canopies/tonneau covers/roll-covers.

Stock: 0 pcs.

Kravas kastes ieliktnis

Loading area bedliner dedicated for Toyota Hilux (2015 -).
Made of polyethylene of enhanced resistance, protects loading area, e.g. against scratches and fluids.
Material: HDPE - Heavy Duty Polietylen

Stock: 0 pcs.

Kravas kastes ieliktnis

Loading area bedliner dedicated for Toyota Hilux (2015 -).
Made of polyethylene of enhanced resistance, protects loading area, e.g. against scratches and fluids.
Intended for assembly with canopies/tonneau covers/roll-covers.
Material: HDPE

Stock: > 1 pcs.