Protection bars

Aizmugures lukturu turētājs CITROEN BERLINGO,PEUGEOT PARTNER,OPEL COMBO,TOYOTA PROACE CITY,VW CADDY

Rear light holder 888484.
- Two-door car models (only models with doors):
Citroen Berligo, 2018-
Peugeot Partner, 2018-
Opel Combo, 2018-
Toyota Proace City, 2020-
VW CADDY (wheelbase L1), 2020-
- Material: AISI 304L.
- Surface treatment: polished.
- Diameter: 40 mm.
- The product meets the requirements of UNECE R26/R61 legislation.
- Number of lamp mounting points: 2 clamp-type holders.
- The lamp holder has pre-drilled holes for inserting the cable (cable not included). A roof plug is included.
Weight kg 3.0

Stock: 0 pcs.

Aizsargstienis TOYOTA LAND CRUISER 150

Code DLC150-R1370-06.
Front bar for TOYOTA LAND CRUISER 150 .
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight:10,3 kg
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.

Aizsargstienis KIA SPORTAGE

Code SPOR-R2160-06.
Front bar for KIA SPORTAGE.
This product has an EU CERTIFICATE, which allows it to be used throughout the EU, as well as pass vehicle inspection without having to remove it.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 60 mm
- Wall thickness: 2 mm
Includes mounting instructions and necessary mounting brackets.
Not compatible with Adaptive Cruise Control (ACC).

Stock: 0 pcs.

Side steps SUZUKI GR VITARA

Trunk mat with anti-sliding material - especial made mat for each model using 3D floor scan t

Stock: > 1 pcs.

Bumper protection TOYOTA LAND CRUISER 200

Stock: 0 pcs.

Aizsargstienis FORD RANGER

Guard bar (stainless steel)-painted in black with a special coating.
The main dimension of the material is 60mm
Compatible with radar
Compatible with parking sensors
Compatible with camera (no info)
Compatible with towing eye
Spoiler with EC type approval. Not for RAPTOR model
Width 1.67m
Heigh 0.1m
Depth0.435m
Weight 8.5kg

Stock: 0 pcs.

sliekšņu trubas TOYOTA RAV 4

Code RAV4-R1870-PR-02.
Side bars for TOYOTA RAV 4.
The side bars has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
Wall thickness: 2 mm
- Weight: 16,3 kg
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.

Side bars SEAT ATECA

Stainless steel side bars with plastic steps - Seat Ateca (2016-)

STEELER® side steps - Seat Ateca - safety and comfort.

Side steps with plastic covers provide the best grip during severe weather conditions. Plastic covers are reliable and stable when getting into the car, even during snowy winters and heavy rainfalls. In winter side steps will serve as a practical support during snow removal from the roof, and in summer they will facilitate loading equipment on the roof rack.

Stainless steel steps with 70mm diameter and 2 mm thickness and combination with a hand-finished provide the product for years not only one season.

With the product you will find a stainless steel mounting set for your car and instructions for easy installation. Solid construction ensures static load at 115 kg, so the steps can be successfully used by adults.

Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry.

We confirm the quality of our products, providing a 24-month warranty on the polished bars and a 12 month warranty on the black bars paintwork.

Bar diameter 70 mm
Thickness 2 mm
Weight 16,3 kg

Stock: 0 pcs.

Side bars FORD RANGER

Stainless steel side bars with plastic steps - Ford Ranger (2012 - 2016 - 2019 -)
STEELER® side steps - Ford Ranger - safety and comfort.

Side steps with plastic covers provide the best grip during severe weather conditions. Plastic covers are reliable and stable when getting into the car, even during snowy winters and heavy rainfalls. In winter side steps will serve as a practical support during snow removal from the roof, and in summer they will facilitate loading equipment on the roof rack.

Stainless steel steps with 70mm diameter and 2 mm thickness and combination with a hand-finished provide the product for years not only one season.

With the product you will find a stainless steel mounting set for your car and instructions for easy installation. Solid construction ensures static load at 115 kg, so the steps can be successfully used by adults.

Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry.

The highest quality is confirmed by certificates TÜV and EN ISO 9001:2008. We confirm the quality of our products, providing a 24-month warranty on the polished bars and a 12 month warranty on the black bars paintwork.

Bar diameter 70 mm
Crossbar diameter -
Thickness 2 mm
Weight 19,7 kg

Stock: 0 pcs.

Aizsargstienis FORD RANGER

Code R19-R1970-06.
Front bar for FORD RANGER.
This product has an EU CERTIFICATE, which allows it to be used throughout the EU, as well as pass vehicle inspection without having to remove it.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
- Weight: 9 kg
Includes mounting instructions and necessary mounting brackets.
Compatible with parking sensors.
Compatible with Adaptive Cruise Control (ACC).

Stock: 0 pcs.

Aizsargstienis NISSAN QASHQAI

Code QUA-R2160-06.
Front bar for NISSAN QASHQAI.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 60 mm
- Wall thickness: 2 mm
- Weight: 6 kg
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.

Sliekšņu trubas MERCEDES BENZ EQV

SIDEBARS (WB 3200MM)
Material AISI304 (stainless steel)
- pipe diameter: 60mm.
- weight: 13,00 kg
- meets the requirements of UNECE R26 / R61
Instructions and necessary mounting brackets.

Stock: 0 pcs.

Aizsargstienis FORD RANGER 2023-

Front guard bar (stainless steel)
EC-CERTIFICATE NO e20*2021/535/XII*2021/535B*00012*00
Brackets OB-70 are required to install additional headlights
-compatible with radar
-compatible with parking sensors
-compatible with camera (no info)
-compatible with tow loop
- diameter - 70 mm.
-weight- 7 kg.

Stock: 0 pcs.

Lukturu turētājs CITROEN JUMPER,IVECO DAILY,FORD TRANSIT,FIAT DUCATO,OPEL MOVANO,RENAULT MASTER

Roof light holder (stainless steel)
-pipe diameter 60mm
-there are mounts for 2 lights
-there is a cable for 2 lights
Products are valid according to UNECE R26/R61 legislation.
- weight 6.6 kg

Stock: > 1 pcs.

Sliekšņu trubas TOYOTA LAND CRUISER 250

METEC stainless steel side bars in BLACK colour - Toyota Land Cruiser 250 2024+ model year. Improves the style and safety of the car.

The side bar is the best protection solution for car owners who want to protect their car body from mechanical damage. Made of stainless steel with very high corrosion resistance in our weather conditions.
The sill skirts can only be mounted on the original sills.
Pipe diameter 25 mm.
Two pieces in a set.
The product complies with UNECE R26/R61 requirements.
The set includes assembly instructions and a mounting kit.
Installation is carried out according to the instructions - no drilling or welding is required, only standard tools are required for installation.

Stock: 0 pcs.

Sliekšņu trubas TOYOTA LAND CRUISER 250

METEC stainless steel side bars in SILVER colour - Toyota Land Cruiser 250 2024+ model year. Improves the style and safety of the car.

The side bar is the best protection solution for car owners who want to protect their car body from mechanical damage. Made of stainless steel with very high corrosion resistance in our weather conditions.
The sill skirts can only be mounted on the original sills.
Pipe diameter 25 mm.
Two pieces in a set.
The product complies with UNECE R26/R61 requirements.
The set includes assembly instructions and a mounting kit.
Installation is carried out according to the instructions - no drilling or welding is required, only standard tools are required for installation.

Stock: > 1 pcs.

Side bars SSANGYONG REXTON

Stainless steel side bars - SsangYong Rexton (2018 -)
Protection side bar is the best solution for people who want to emphasize the car body line. The product is not intended to be used as a step but perfectly protects threshold from mechanical damage.

Stainless steel steps with 60mm diameter and 2 mm thickness and combination with a hand-finished provide the product for years not only one season.

With the product you will find a stainless steel mounting set for your car and instructions for easy installation. Solid construction ensures static load at 115 kg, so the steps can be successfully used by adults.

Stainless steel (AISI 304) has a very high resistance to corrosion in difficult weather conditions - successfully used in industry including food industry.

We confirm the quality of our products, providing a 24-month warranty on the polished bars and a 12 month warranty on the black bars paintwork.

Stock: 0 pcs.

Bumper protection TOYOTA HI-LUX

Trunk rubber mat - especial made mat for each model using 3D floor scan technology.

Stock: 0 pcs.

Polyurethane arc NISSAN NAVARA

Interior rubber mats Rezaw-Plast - especial made rubber mats for each model using 3D floor s

Stock: > 1 pcs.

Aizsargstienis ISUZU D-MAX

Code D-MAX-R2070-06.
Front bar for ISUZU D-MAX.
This product has an EU CERTIFICATE, which allows it to be used throughout the EU, as well as pass vehicle inspection without having to remove it.
The arc has been designed in accordance with the new EU standards and has successfully passed all certification tests.
Made of high quality stainless steel, hand polished.
- Pipe diameter: 70 mm
- Wall thickness: 2 mm
Includes mounting instructions and necessary mounting brackets.

Stock: 0 pcs.