Components

El.vadi

1605-WK023
HD Deutsch wiring kit for two lamps for connection from a battery.
Application: auxiliary lights, daytime running lights, beacon.
Max. Power 300W.
Voltage 12V.
Operating temperature -30 ° C ... + 50 ° C.

Stock: > 1 pcs.

El.vadi

1605-WK022
A set of wiring for two lamps for connection from the battery.
Application: to control car lighting.
For convenience, it has a remote control and a flash activation function.
Maxim. power 300 watts.
Voltage 12-24 V.
Operating temperature -30 ° C ... + 50 ° C

Stock: 0 pcs.

El.vadi

1605-WK018
Set of wires HD Deutsch for one lamp, for connection from the battery.
Kit: relay + wiring harness.
Maximum power 300 watts.
12V relay.
Working temperature from -40C to + 150C.

Stock: > 1 pcs.

Lazer gaismas kliedētājs

The amber lenses for the Triple-R range of lights alters the standard 5000 kelvin colour temperature to ‘selective yellow’. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
Come supplied with 4x spring clips.
-designed only for lamps of the second generation.

Stock: 0 pcs.

Electrical wires

Stock: > 1 pcs.

Lazer lukturu aizsargs

Made from high-tech impact-resistant and washable neoprene, the new Lazer Lamps universal LED covers are available in 5 different lamp sizes. Protected by high-strength Velcro pads, the covers are easy to install and remove.
Optimally designed covers optimized for the Triple-R series, but potentially suitable for any kind of LED light barriers, also have the advantage of significantly reducing the wind noise that may come from some of the larger lamps when installed above the windshield.

Stock: 0 pcs.

Rezistors LED lampai

E1368
Resistor for LED lamp 12V.
Resistor designed for installation in 12V trailers with LED lamps.
Ensures correct operation of LED (light-emitting diode) lamps using a standard breaker - designed for conventional incandescent lamps.
The resistor must be installed in a trailer with a standard switch between the pointer switch and LED lamps, separately for the left and right side.
The price is for 1 piece.

Stock: > 1 pcs.

El.vadi

Wiring kit, code LAZER 1L-LP-PL-120, for one LAZER lamp with built-in parking light function.
Cable length 1.2 m
Included :
- relay 12 V
- 20 A fuse.
- on/off switch for independent high beam operation.
The relay holder complies with the IP53 standard.

Stock: 0 pcs.

Plāksnes turētāja montāžas komplekts

Code 1605-3032
Mounting kit for stand, 20 pcs.
The kit includes:
- 20 stainless steel screws for fixing the plate,
-2 screws for fixing a plated number plate,
- 2 white caps for screw heads.

Stock: > 1 pcs.

DT kabelis Hane

Code 1605-N8K202
DT plug with cable.
Description
• Consists of 2 cables - with a DT plug and with a corresponding DT plug
• Total length 0.5 m
• wire 2x0.75 mm²
• ADR approved

Stock: > 1 pcs.

El.vadi

1605-WK007
Kit for connecting LED lamps.
For fog lights or high beam.
Set-
toggle switch + 2 relays + wiring harness.
Max. power 300 W.
Relay 40A / 12V
Wires 2.0 mm.
Operating temperature -40 ... +65 C

Stock: 0 pcs.

Akumulatora / metināšanas kabelis

Article: VUK16PUN-50M.
Wire 16 mm.
-Red.
Packing size: 50 METERS.
the cost is indicated for 1 meter.
-application- for example, to connect winch to the back.
Manufacturer:
Country: ITALY.

Stock: > 1 pcs.

Akumulatora / metināšanas kabelis

Article: VUK16-50M.
Wire 16 mm.
-THE BLACK.
Packing size: 50 METERS.
the cost is indicated for 1 meter.
-application- for example, to connect winch to the back.
Manufacturer:
Country: ITALY.

Stock: > 1 pcs.

Lazer gaismas kliedētājs

The amber lenses for the Triple-R range of lights alters the standard 5000 kelvin colour temperature to ‘selective yellow’. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
Come supplied with 4x spring clips.

-not designed for lamps of the second generation, newer releases.

Stock: 0 pcs.

Slēdzis

The switch with the control indicator of 12 volts.

Stock: 0 pcs.

Slēdzis

The switch with the control indicator of 12 volts.

Stock: > 1 pcs.

Lazer lukturu aizsargs

Made from high-tech impact-resistant and washable neoprene, the new Lazer Lamps universal LED covers are available in 5 different lamp sizes. Protected by high-strength Velcro pads, the covers are easy to install and remove.
Optimally designed covers optimized for the Triple-R series, but potentially suitable for any kind of LED light barriers, also have the advantage of significantly reducing the wind noise that may come from some of the larger lamps when installed above the windshield.

Stock: > 1 pcs.

Wire harness for work lamps

LB0062
WIRING HARNESS FOR LED LAMPS AND PANELS
IN VEHICLES, AGRICULTURAL AND CONSTRUCTION MACHINES, QUADRICYCLES, BOATS AND OTHER EQUIPMENT.
- The power switch has light indicators indicating on and off, the bottom of the switch is glued with adhesive tape for easy installation.
The unit is protected by a 15 A fuse.
The lamp cable has a plug suitable for most types of lamps (the plug can be cut off and any lamp available on the market can be connected to the cables).
Power Cable Length - Relay: 0.5m
Cable Length of Relay Lamp: 2m
Relay Switch Cable Length: 2.8m
The kit includes:
- complete set with connectors
- power switch with LED indicators
- 12V relay
- SEALED
- CABLE-3M
-POWER 12 V MAX. 120 watts

Stock: > 1 pcs.

Slēdzis

The switch with the control indicator of 12 volts.
-red

Stock: 0 pcs.

Slēdzis

The switch with the control indicator of 12 volts.
-green

Stock: > 1 pcs.