Lighting and lamps

Lampu turētājs

Headlight mounts.
- 76 mm.
material
- black painted stainless steel.

Stock: > 1 pcs.

LED autospuldze

Dimensions - 41 / 12mm (length / width)
Color - 5600 K
LED diode - 12 x 4014
Power consumption - 2.9W
Voltage - 12 / 24V
bipolar

Stock: > 1 pcs.

LED autospuldze

Dimensions - 39 / 12mm (length / width)
- color - 5600 K
LED - 12 x 4014
- power consumption - 2.9 W
- voltage - 12 / 24V
bipolar

Stock: > 1 pcs.

Papildlukturis LED

Take no chances with low light and night driving with the Linear-12 Elite, an exceptional auxiliary LED lighting solution that can be mounted as a single lamp fixture or in pairs, for an ECE approved solution that provides superior levels of light output, optimised for everyday road use, where either space is a limiting factor in regards any installation, or the preference is for a sleek, aerodynamic solution to get noticed more at night than during the day.


The Linear-12 Elite utilises a combination of highly efficient 3W LEDs, the same as used in our 2018 WRC lighting solutions, which together deliver 8,100 lumens, and 1 lux to 400m. Impressive considering the lamp weighs 800grams and has power consumption of just 84W. While this foundation of the Linear Elite’s lighting performance appears good on paper, it is through advances in our material and electronics design, that the Linear Elite really stands apart. In particular, the vacuum-metallised high-reflectivity optics carefully designed and engineered utilising the latest CAD design and light simulation software, that provide for superior light distribution when out on the road, where it really matters. A reduced vertical spread enables more light to be directed to the sides of the road, while the high intensity of the LEDs ensures enviable distance illumination.


At just 382mm in length and 40mm in height, the Linear-12 Elite is engineered to be easy to fit in tight and confined spaces. The clean design of the Linear range provides for a premium look and feel, that also ensures minimal impact on airflow around any installation. The supplied stainless steel side brackets allow flexibility in the mounting location and position, while stainless steel anti-theft fasteners (included as standard), means the light will stay safe and secure.


Fully ECE approved for on-road use, the Linear range benefits from a comprehensive 5 year warranty, and a lifetime guarantee on the polycarbonate lens with hardcoat lacquer. Dynamic control modulation, which regulates the light output considering any extreme environmental and thermal conditions of the lamp, helps protect the electronic components from heat damage, and ensures the light performs as well today as it will in many years’ time.

- x1 Linear-12 Elite LED Lamp
- x1 Anti-Theft Side Mount (1127k)
- x1 Wiring and Installation Instructions

Voltage Range 9-32V
LED Life 50,000 hours
Weight 800 gr
HIGH BEAM FUNCTION
Total Luminous Flux 8100 Lm
Number of High Output LEDs 24
Power Consumption 84 Watts
Current Draw (at 14.4V) 5.8 Amps
CERTIFICATION
High Beam ECE R112
ECE Reference 37.5
DIMENSIONS
Width 382 mm
Depth 62 mm
Height 40 mm
PHOTOMETRIC DATA
0.25 lx Line 796 metres
0.5 lx Line 563 metres
1 lx Line 398 metres
3 lx Line 230 metres
- for connection it is necessary to use a set of wires LAZER 8231-12VSP.
- during installation, an optional bracket LAZER-1124K can be used.

Stock: 0 pcs.

Papildlukturis LED

The Triple-R 1000 Elite, 3rd Generation, is a high-performance auxiliary LED driving light, that leaves nothing to the imagination. Benefitting from upgraded LEDs and optics, the same as used in the company’s 2018/9 WRC lighting solutions, the Elite-3 delivers an unrivalled automotive lighting experience. The lamp develops 9,020 raw lumens and 1 lux to an astonishing 675m. With the light distribution optimised utilising the latest and most sophisticated CAD design and light simulation software, coupled with extensive testing and feedback across the road and professional motorsport sectors, there is no compromises made in regards lighting performance or reliability.
Achieving E-mark accreditation through adoption of Lazer’s dual output E-boost functionality, this is a product to be relied upon on and off-road. Measuring 400mm in length the product is versatile and well-suited to a wide range of different applications. While the distance illumination may grab the attention it is really in the mid to long-range distribution of light at the sides of the road/track where the Triple-R 1000 Elite now really stands apart. This improved distribution of light to the sides of the road is made possible in part by the combination of highly efficient LEDs, which on the one hand deliver outstanding distance illumination, and on the other, provide for the impressive spread of light left/right. Furthermore, modified highly-reflective, vacuum-metallised optics reduce the up/down spread of light when compared to the equivalent Standard Triple-R product. In turn, this means proportionately less light hitting the road directly in-front of the vehicle, particularly when the lamps are mounted low down, close to the ground.
In pursuing the goal of designing, engineering, and manufacturing the ultimate road-legal auxiliary driving light, we have left no stone unturned in the pursuit of perfection, from the distribution of light, to the carefully selected 5000 kelvin colour temperature proven to improve sharpness and definition of the road ahead, to the advanced electronics and material design which drives the high-end styling of the lamps and superior build quality, this is a product to both impress and be relied upon.
As with all Triple-R products, the Elite range has been designed and built in the UK, with an uncompromising commitment to maximising light output and reliability. Alongside a CAE optimised heatsink, an electronic thermal management system provides further confidence that the Triple-R’s light output is always maximised whatever the environmental and thermal conditions of the lamp. Anodised and powder coated, the lamp benefits from superior corrosion resistance, while a lifetime guarantee on the hard-coated polycarbonate lens, combined with a comprehensive 5-year warranty provide further reassurance for owners.
What's included:
- x1 Triple-R 1000 Elite-3 LED Lamp
- x2 Centre Mount (1114k)
- x1 Wiring and Installation Instructions .
ECE approved through dual output E-Boost technology
CAE optimised heatsink.
Electronic thermal management.
‘Unbreakable’ polycarbonate lens with hardcoat*.
Anodised aluminium heatsink provides for improved thermal dynamics (see Download section for Care Instructions).
-IP67 watertight.
Comes as standard with 70cm cable, including pre-wired male & female connectors.
-5 year warranty.
Designed & manufactured in Britain.

Voltage Range 9-32V
LED Life 50,000 hours
Weight 1420 gr
HIGH BEAM FUNCTION
Total Luminous Flux 9020 Lm
Number of High Output LEDs 8
Power Consumption 92 Watts
Current Draw (at 14.4V) 6.4 Amps
CERTIFICATION
High Beam ECE R112
ECE Reference 40
DIMENSIONS
Width 410 mm
Depth 103 mm
Height 73 mm
PHOTOMETRIC DATA
0.25 lx Line 1351 metres
0.5 lx Line 955 metres
1 lx Line 675 metres
3 lx Line 390 metres
- for connection it is necessary to use a set of wires LAZER 8226-12VSW

Stock: 0 pcs.

Režģa stiprinājumi

Linear centre mounting bracket includes A2 stainless steel hardware combined with extremely tough PA66 GF30 (glass filled nylon) ruggedised mounts. The mount fixes into the channel on the back of the Linear heatsink, and secured using M5 grub screws. Bracket orientation can be reversed in order to have the light mounted upwards or hanging down relative to the vehicle mounting point. Mounting kit includes anti-rotation features.
For use with Linear products only.

Stock: 0 pcs.

Režģa stiprinājumi

The LAZER-1121K kit consists of a 2-mm thick stainless steel stabilizing bracket, consisting of two parts, which corresponds to the Lazer Lamps series of Triple-R or ST / T LED floodlights.
The stabilizer arm is attached to the lamp using the supplied low-profile bracket, and then secured to an additional rigid mounting location on your vehicle, thereby reducing vibration, stress and movement, which can affect some lighting installations.
Length: 130 mm - 230 mm

Stock: > 1 pcs.

Lazer gaismas kliedētājs

The amber lenses for the Triple-R range of lights alters the standard 5000 kelvin colour temperature to ‘selective yellow’. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
Come supplied with 4x spring clips.

-not designed for lamps of the second generation, newer releases.

Stock: 0 pcs.

Papildlukturis LED

Combination of highly efficient 3W ‘premium bin’ LEDs
Vacuum-metallised optics deliver wide spread of light
Flexible mounting options – anti-theft mounting brackets included
Sleek, low profile design facilitates installation
Electronic thermal management
‘Unbreakable’ and hardcoated polycarbonate lens*
Anodised aluminium heatsink provides for improved thermal dynamics (see Download section for Care Instructions)
ECE approved for on-road use
IP67 watertight
5 year warranty
Supplied with male/female connectors (pre-wired)
Designed & manufactured in Britain.

-Voltage Range 9-32V
-LED Life 50,000 hours
-Weight 495 gr
HIGH BEAM FUNCTION
-Total Luminous Flux 4050 Lm
-Number of High Output LEDs -12
Power Consumption 42 Watts
Current Draw (at 14.4V) 2.9 Amps
CERTIFICATION
High Beam ECE R112
ECE Reference 17.5
DIMENSIONS
Width 232 mm
Depth 62 mm
Height 40 mm
PHOTOMETRIC DATA
0.25 lx Line 563 metres
0.5 lx Line 398 metres
1 lx Line 282 metres
3 lx Line 163 metres
- for connection it is necessary to use a set of wires LAZER 8225-12VSW
during installation, an optional bracket LAZER-1124K can be used

Stock: > 1 pcs.

LED autospuldze

LED CANBUS 12SMD
- white 12V / 24V
PRODUCT DESCRIPTION-
Dimensions - 36 / 9mm (length / width).
Color - 5600 K.
LED diode - 12 x 4014.
Power consumption - 2 watts.
Voltage - 12 / 24V.
Bipolar.

Stock: > 1 pcs.

LED autospuldze

Code 01097
LED lamp
12V, white BA9S, in set 2.pcs

Stock: > 1 pcs.

Papildlukturi LED

-18 watt
  -9-30 V
1500lm 6x LED SMD2525
- ECE-R10
Size-154mm x53mm x38mm
light output -18W.
Case Material: Aluminum
Bracket Material: Stainless Steel
  Lens Material: PC
Color Temperature: 6000-6500k

Stock: > 1 pcs.

Montāžas kronšteins

Headlamp mount.kitfor VW AMAROK, mounted in original position, without drilling.

Color: Black

Stock: 0 pcs.

Slēdzis

The switch with the control indicator of 12 volts.

Stock: 0 pcs.

Slēdzis

The switch with the control indicator of 12 volts.

Stock: > 1 pcs.

Left front fog lamps

Stock: > 1 pcs.

Lazer lukturu aizsargs

Made from high-tech impact-resistant and washable neoprene, the new Lazer Lamps universal LED covers are available in 5 different lamp sizes. Protected by high-strength Velcro pads, the covers are easy to install and remove.
Optimally designed covers optimized for the Triple-R series, but potentially suitable for any kind of LED light barriers, also have the advantage of significantly reducing the wind noise that may come from some of the larger lamps when installed above the windshield.

Stock: > 1 pcs.

Papildlukturis LED

00R4-PL-STD
Lazer Lamp
Set 1 pcs
Ultra long-range optics
• High output LED’s from world leader in LED technology
• Integrated Position Lights for added safety and improved styling
• CAE optimised heatsink
• Electronic thermal management
• ‘Unbreakable’ polycarbonate lens
• Innovative design and unique styling
-during installation, LAZER 8231-12VSP wires are required.

Stock: 0 pcs.

Grille mount brackets

The brackets are made of high-strength, UV-resistant ASA material.
-the brackets are intended for fixing the headlights to the car grille.

Stock: 0 pcs.

Wire harness for work lamps

LB0062
WIRING HARNESS FOR LED LAMPS AND PANELS
IN VEHICLES, AGRICULTURAL AND CONSTRUCTION MACHINES, QUADRICYCLES, BOATS AND OTHER EQUIPMENT.
- The power switch has light indicators indicating on and off, the bottom of the switch is glued with adhesive tape for easy installation.
The unit is protected by a 15 A fuse.
The lamp cable has a plug suitable for most types of lamps (the plug can be cut off and any lamp available on the market can be connected to the cables).
Power Cable Length - Relay: 0.5m
Cable Length of Relay Lamp: 2m
Relay Switch Cable Length: 2.8m
The kit includes:
- complete set with connectors
- power switch with LED indicators
- 12V relay
- SEALED
- CABLE-3M
-POWER 12 V MAX. 120 watts

Stock: > 1 pcs.