Lighting and lamps

LED darba lukturis

High-Performance LED Work Light. Engineered for demanding environments, this premium LED work light delivers exceptional brightness and durability. Equipped with 5x10W CREE LEDs, it produces up to 3900 measured lumens (4805LM raw output) at a crisp 6000K color temperature, ensuring optimal visibility in active work zones.
The rugged aluminum frame and impact-resistant polycarbonate lens provide long-lasting performance, while the IP68 rating guarantees complete protection against dust and water immersion. Its wide 9–32V voltage range and 2-pin DT plug with a 1.5 m wire make it versatile and easy to install across a variety of vehicles and equipment.
Compact yet powerful, this light is EMC-approved, making it a reliable choice for professionals who need glare-free, high-intensity illumination.

Key Specifications:
- Dimensions: 108 × 108 × 76 mm
- Weight: 1.09 kg (net 1.00 kg)
- Voltage: 9–32V
- Output: 3900 lm (measured)
- Color Temperature: 6000 K
- Plug Type: 2-pin DT
- Wire Length: 1.5 m
- Materials: Aluminum frame, polycarbonate lens
- Protection: IP68 rated, EMC-approved
- Warranty: 24 months
- EAN-13: 6438255003851

Perfect for construction, agricultural, marine, and off-road applications, this work light combines high-output performance with robust durability—ready to perform wherever the job takes you.

Stock: 0 pcs.

El.vadi

Two-Lamp wiring kit for Lazer Lamps High Performance LED lights. The setup is quick, easy, and reliable with 2-pin Deutsch connection and no configuration procedures. The kit features a 12V relay (in waterproof housing), fuse, a battery terminal at one end, and 6.5m of flex on the lamp cable, and allows for the operation of Lazer products either in parallel with the standard lighting on the vehicle, and/or via an independent switch which can be mounted inside your vehicle.
All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring in to your vehicle system.
Compatible with:
Linear-24 Flood
Utility-25
Utility-25 MAXX
Utility-45
Utility-50
Utility-80 HD (Heavy Duty)
RP Spot

Specifications:
6.5m cable lengths
Includes 12V relay and 20 amp fuse
Relay holder approved to IP53 when mounted in a vertical (upright) orientation
2-pin deutsch connections
Includes on/off switch for independent operation
Braided cable sections for added protection in engine bay

Stock: > 1 pcs.

Papildlukturis LED W-Light Thunderbolt

Additional high beam W-Light Thunderbolt, code: 1605-NS3837-stends.
Specifications:
- Voltage: 12–32 V.
- Power consumption: 7.4 A at 12 V.
- LED: 20 x Osram
- Luminous flux: 9423lm
- Color temperature: 6000K
- Distance: 1 lux at a distance of 404 m.
- Connection: 2-pin DT connector.
- Length: 553 mm
- Width: 74 mm
- Height: 67 mm
- Aluminum frame
- IP67
- Certificates: R112, ref.50, R10.
- 3 year warranty
The kit includes all the necessary fasteners for installation.

Stock: 0 pcs.

Papildlukturis LED W-Light Thunderbolt

Additional high beam W-Light Thunderbolt, code: 1605-NS3837.
Specifications:
- Voltage: 12–32 V.
- Power consumption: 7.4 A at 12 V.
- LED: 20 x Osram
- Luminous flux: 9423lm
- Color temperature: 6000K
- Distance: 1 lux at a distance of 404 m.
- Connection: 2-pin DT connector.
- Length: 553 mm
- Width: 74 mm
- Height: 67 mm
- Aluminum frame
- IP67
- Certificates: R112, ref.50, R10.
- 3 year warranty
The kit includes all the necessary fasteners for installation.

Stock: > 1 pcs.

Papildlukturis

Code 1605-NS7 LEDA
LED-KAUGTULI 9-36V, 1605-1605-NS7 LEDA is a modern additional high beam floodlight. Equipped with TIR optical system, which means total internal reflection - all light is effectively reflected and directed before it leaves the reflector. With this floodlight, you will get more efficient road illumination and minimize light loss!
Dimensions:
diameter - 180 mm,
thickness - 65 mm,
height - 191 mm, including the bracket,
Voltage - 9-36V
Power - 60W (12x5W LED)
Brightness - 5400 lm
Throw length - 380 m (1 lux)
Image: combined, light (wide and oblong)
Aluminium case
Ref. thirty
ECE R112 / R7 / R10 certificate
IP68 (waterproof / dustproof)
Weight - 1225 g
3 years warranty

Stock: 0 pcs.

Papildlukturis LED BFL

BFL Frameless Slim

Dimensions: 536.00 x 34.00 x 68.00mm
Weight: 370g (net 1.90kg)
Voltage: 11-32V
Lumens: 10000 lm
Lumens (measured): 5500 lm
Wattage: 100 W
Reference value: 50
Shape: Bar
Color temperature: 6000 K
Plug type: 2-pin DT
Frame material: Aluminum
Lens material: Polycarbonate
IP rating: IP68
Model name: Frameless Slim
Information: 20x Leds, power consumption: 6.34A @12V, stainless steel brackets, IP68, 2-pin DT- plug.

Stock: 0 pcs.

Aditional LED light W-Light Wave

Stock: > 1 pcs.

Extra lights

Stock: > 1 pcs.

Papildlukturi

Headlamp driving beam
-type of lamps - H1
-voltage [V] -12
-width (mm): 144.6
-height (in mm) 127
-depth [mm] 115.8
-ref. 37.5

Stock: 0 pcs.

Lukturi

Headlamp main beam

Stock: 0 pcs.

Mounting kit

Mounting kit for mounting laser lamps
on the front grill of the vehicle.
Designed to install one or a pair of lamps.
The set includes a set of special mounts for installing lamps.
OEM quality
Bulbs and wiring not included, must be purchased separately.

Stock: 0 pcs.

Grille mount brackets

The brackets are made of high-strength, UV-resistant ASA material.
-the brackets are intended for fixing the headlights to the car grille.

Stock: > 1 pcs.

Režģa stiprinājuma kronšteini

The brackets are made of high-strength, UV-resistant ASA material.
-the brackets are intended for fixing the headlights to the car grille.

Stock: 0 pcs.

Grille mount brackets

Mounting brackets VW T5.

-set of 4 pieces.

The brackets are made of high-strength, UV-resistant ASA material.
-the brackets are intended for fixing the headlights to the car grille.

Stock: 0 pcs.

Control block

Control block, code 1605-WK008.
For installing additional headlights on cars with CANbus.
The control unit detects and turns on the current 12/24 V 1 A when the headlights of the car are on.

Stock: > 1 pcs.

papildlukturi LED

LED panels 5 W x 40 LED , 200 W
- working lights 12-32V, 6500K,
-9-32V-15600Lm
-ECE R10
-IP67 waterproof
-L 1039 x W 74.5 x H 76.5
-aluminum body
- the color is black
-weight 3.7 kg
-50,000 h
As an option, a set of wires for mounting LB0062

Stock: > 1 pcs.

papildlukturi LED

LED CREE 180W (5900-13 200Lm) working lamp 12-24V, 6500K, IP67 (For tractors, off-road vehicles, forestry equipment)
- Work from voltage 10-30V
-protection class IP67 waterproof
-energy consumption of 180W
Hull material / color aluminum / black
-lock size 960 * 45 * 65 m
LED diodes 5w x36gb CREE
-lamp angle - combined narrow and wide
Certificates-CE
work temp -40 ° C to 95 ° C
-Service time-50 000h
-light output-12V 5900Lm, 24V 13200Lm
-Light temperature (K) 6000K
safety shockproof
As an option, a set of wires for mounting LB0062

Stock: 0 pcs.

LED darba/signāllukturis OPTIBEAM

Optibeam SlimX Flash – High-Performance Low-Profile LED Work Light

The Optibeam SlimX Flash sets a new standard in compact, high-output work lighting. Delivering a powerful 2760 lumens of real measured brightness, it combines performance, durability, and visual comfort. Its advanced Xfrost lens coating ensures even light distribution, while the 5300K color temperature provides a natural, eye-friendly illumination – perfect for extended use.

Built to last, the lamp features a corrosion-resistant coating and IP68 water and dust protection. Its low-profile design with a discreet rear mounting leg allows flexible top or bottom installation, making it ideal for a wide range of vehicles. Certified to ECE R10, R65, and CISPR Class 3, the SlimX Flash meets strict safety and quality standards.

With a 36-month warranty, this light offers long-term reliability and performance for demanding professionals.

Key Specifications:
Dimensions: 157 × 47 × 68 mm
Voltage: 9–36V
Lumens: 3060 lm (measured: 2760 lm)
Color Temperature: 5300K
IP Rating: IP68
LEDs: 6 + 6
Approvals: ECE R10, R65, CISPR Class 3
Warranty: 36 months

Stock: 0 pcs.

LED bākugunis

LED warning beacon 237x145 R10 R65 with magnet, code BLK0031.
Specifications:
- 1 warning flash.
- 32 LEDs.
- power consumption 23 W.
- voltage 12 V / 24 V.
- certificate: ECE R65, ECE R10.
- material: diffuser: PC, body: PC.
- connection cable: length 2.5 m, with cigarette lighter plug.
- Attachment: magnet.
- weight: 1000 g.

Stock: > 1 pcs.

LED work/warning light

Code 1603-300642 is a compact, multifunctional 30 W Bullboy LED work light.
This innovative work light is only 44mm high and has an efficient light output with a reversing light certificate and an R65 approved signal light.
Thanks to its small size and dark reflector optics, it is easy to install even in very tight spaces. The frameless housing has a modern design and prevents snow, ice and dirt from getting on the glass.
Application:
- Working light 5500K: 6 Osram LEDs 5 W.
Characteristics:
- Dimensions : 157.00 x 43.70 x 60.00 mm
- Voltage : 10-30 V
- Lumen (theory/measured) : 2880lm/1490lm
- Power : 30W
- Color temperature : 5500K
- Wire length : 400 mm
- IP protection class : IP67, IP69K
- Approvals : R10, R65, R23
- Certificate: R65

Stock: > 1 pcs.