Roof bars

Roof racks

BOSS AERO 1.07 - Roof bars
- Package includes: 2 aluminum rods. The kit for mounting in the BOSS is not included and should be sent separately.
- The BOSS roof bars are an aerodynamic shape that reduces air resistance and noise.
- Easy to install, complete with installation instructions, no additional tools are required.
- Roof bars seal is made of non-slip rubber. In addition, the boot is equipped with a standard T-groove.
- Load capacity 70 kg.
- Length 1,07 m.

Stock: > 1 pcs.

Jumta bagāžnieks

Trunk 3344+6114 DROMADER C15-Aero140.
Included: Crossbars - 2 pcs., Fasteners - 4 pcs., Key.
Roof rack Dromader - a rack that is suitable for most cars with factory-made vertical threads for roof rack installation.
Technical parameters
Roof rack type: mounted at the factory-fitted mounting points with 6 or 8 mm thread.
Stick length: 140 cm.
Stick width (mm): 52.
Stick height (mm): 30.
Load capacity * (kg): 70 (may depend on vehicle characteristics).
Material: aluminum.
Rod type: aluminum aerodynamic profile.
Security key: yes.
Certificate: Pimot
Assembly: using tools.
The set includes: 2 aluminum aerodynamic profile + 4 support feet + assembly instructions.
Caution - roof openings are usually perforated and require the installation of an additional seal with silicone or other sealants.
-the trunk to improve the view and aerodynamics can be additionally equipped with protection -кomplekts PLUS.

Stock: > 1 pcs.

Bagāžnieka šķērsstieņi

Crossbars (000125200000) together with fasteners (000106300000)
set of two pieces
Citroen Berlingo III / Berlingo III XL, 5 doors, 2018> , screws 8x25
Opel Combo (E) , 5 doors, 2018> , screws 8x25
Peugeot Partner III / Rifter III, 5 doors, 2018> , screws 8x25
Toyota ProAce City, 5 doors, 2018> , screws 8x25
VW Caravelle T6, 5 doors, 2015> , screws 6x40
VW Transporter T5, 3 doors, 03>2015, screws 6x40
VW Transporter T6, 2015> , screws 6x40

Stock: 0 pcs.

Jumta bagāžnieks

Fasteners (000106600000) together with crossbars (000125000000)

Chevrolet Equinox III, 2017> , screws 8x25
Citroen Jumpy (Mark 2) , 07>2016, screws 6x16
Citroen Nemo / Nemo Van, 2008> , screws 8x25
Citroen Space Tourer, 07>2016, screws 6x16
Fiat Doblo Cargo / Cargo Maxi, 00>10 , screws 6x16
Fiat Doblo II, 10>2015, screws 6x25
Fiat Doblo II, 2015> , screws 6x16
Fiat Doblo II Maxi, 2015> , screws 6x25
Fiat Fiorino II, 87>2013, screws 6x25
Fiat Fiorino III, 2007> , screws 6x25
Fiat Scudo, 94>2006, screws 6x25
Fiat Scudo II, 07>2016, screws 6x25
Ford Connect I Transit, 02>2013, screws 6x25
MB Citan (W415) , 2012> , screws 8x25
Nissa Kubistar, 03>2009, screws 8x25
Nissan Nv 200, 2009> , screws 8x25
Opel Combo (D) , 14>2018, screws 6x25
Peugeot Bipper, 2008> , screws 6x25
Peugeot Expert, 07>2016, screws 6x25
Peugeot Expert 94>2006 , screws 8x25
Peugeot Partner II, 08>2018, screws 6x25
RAM ProMasterCity, 2014> , screws 6x16
Renault Kangoo Express (Mk1) , 98>2008, screws 8x25
Renault Kangoo Express (Mk2) , 2008> , screws 8x25
VW Caddy (2k) Life / Maxi Life / Panel , 10>2015, screws 8x25
VW Caddy (2k) Life / Maxi Life / Panel , 2015> , screws 8x25
VW Caddy IV, 2021> , screws 8x25

Stock: > 1 pcs.

Jumta bagāžnieki

Crossbars (000125000000) together with fasteners (000106600000)

Chevrolet Equinox III, 2017> , screws 8x25
Citroen Jumpy (Mark 2) , 07>2016, screws 6x16
Citroen Nemo / Nemo Van, 2008> , screws 8x25
Citroen Space Tourer, 07>2016, screws 6x16
Fiat Doblo Cargo / Cargo Maxi, 00>10 , screws 6x16
Fiat Doblo II, 10>2015, screws 6x25
Fiat Doblo II, 2015> , screws 6x16
Fiat Doblo II Maxi, 2015> , screws 6x25
Fiat Fiorino II, 87>2013, screws 6x25
Fiat Fiorino III, 2007> , screws 6x25
Fiat Scudo, 94>2006, screws 6x25
Fiat Scudo II, 07>2016, screws 6x25
Ford Connect I Transit, 02>2013, screws 6x25
MB Citan (W415) , 2012> , screws 8x25
Nissa Kubistar, 03>2009, screws 8x25
Nissan Nv 200, 2009> , screws 8x25
Opel Combo (D) , 14>2018, screws 6x25
Peugeot Bipper, 2008> , screws 6x25
Peugeot Expert, 07>2016, screws 6x25
Peugeot Expert 94>2006 , screws 8x25
Peugeot Partner II, 08>2018, screws 6x25
RAM ProMasterCity, 2014> , screws 6x16
Renault Kangoo Express (Mk1) , 98>2008, screws 8x25
Renault Kangoo Express (Mk2) , 2008> , screws 8x25
VW Caddy (2k) Life / Maxi Life / Panel , 10>2015, screws 8x25
VW Caddy (2k) Life / Maxi Life / Panel , 2015> , screws 8x25
VW Caddy IV, 2021> , screws 8x25

Stock: 0 pcs.

Jumta bagāžnieks

Roof rack Sonora.
Great choice for transporting cargo on the roof of the car to free up space in the cabin.
Only two roof bars are required to attach the Sonora roof rack. Easy to install, fits most canes on the market.
The brackets are suitable for crossbars up to 30 mm high and 90 mm wide.
High adjustment allows the rack to be mounted on crossbars with a spacing (from center to center) of 50-75 cm.
The front baffle will reduce noise and facilitate airflow through the basket.
The steel frame of the trunk is coated with powder, which provides high resistance to weather conditions.
Technical parameters:
Load capacity (kg): 68
Length (cm): 120
Width (cm): 90
Height (cm): 15
Weight (kg): 15.6

Stock: 0 pcs.

Jumta bagāžnieks

Roof rack.
Includes:
- 3408 - Kit Beta 108 mounts.
- 3351 - Lapy Beta mounts .
- steel cross bars black 165 cm - 2 pcs.
Maximum load (kg) - 75.

Stock: > 1 pcs.

Bagāžnieka stiprinājumi

Rack mounting kit Beta Kit 108 .
in set 4 pcs
Designed for each car model separately.
The kit has everything you need - adapters, fasteners (bolts, nuts, washers) and a wrench for attaching the roof rack to the car in specially designed places.

Stock: > 1 pcs.

Jumta bagāžnieks Toyota HILUX

Roof rack designed for Toyota HILUX. This is a spatial steel structure, painted black and trimmed on the outside of the Raptorem. On the sides of the trunk platform there are fixtures for LED work lamps and fixtures for LED panels in front of the luggage compartment. The price is for a ready-made platform with special mounts for Toyota HILUX, but without the cost of lighting. The platform is pre-flat and adapted to install tents on the roof. On the upper plane there are holes for convenient mounting of luggage racks and screwing in any individual fasteners.
   Dimensions of the platform: 1200mm x 1300mm


Powder coated with black paint and additionally coated with Raptor structure for additional protection against mechanical damage.

Stock: 0 pcs.

Bagāžnieka stiprinājumi

Trunk mount, code DromaderD3-kit.
The mount's grips are properly profiled, made from thick steel and equipped with rubber elements to protect the vehicle's paintwork.
Includes: 4 pcs.

Stock: 0 pcs.

Roof racks

Stock: 0 pcs.

Bagāžnieka šķērsstieņi

Roof racks.
- length 140 cm width 3 x 2 cm.
- black metal in a plastic shell.
- a set of two pieces.

Stock: 0 pcs.

Roof racks

Trunk DROMADER C15-160AERO.
Included: Crossbars - 2 pcs., Fasteners - 4 pcs., Key.
Roof rack Dromader - a rack that is suitable for most cars with factory-made vertical threads for roof rack installation.
Technical parameters
Roof rack type: mounted at the factory-fitted mounting points with 6 or 8 mm thread.
Stick length: 160 cm.
Stick width (mm): 52.
Stick height (mm): 30.
Load capacity * (kg): 70 (may depend on vehicle characteristics).
Material: aluminum.
Rod type: aluminum aerodynamic profile.
Security key: yes.
Certificate: Pimot
Assembly: using tools.
The set includes: 2 aluminum aerodynamic profile + 4 support feet + assembly instructions.
Caution - roof openings are usually perforated and require the installation of an additional seal with silicone or other sealants.
-the trunk to improve the view and aerodynamics can be additionally equipped with protection -кomplekts PLUS.

Stock: > 1 pcs.

Jumta bagāžnieks Mitsubishi L200

Roof trunk B045.
Designed for Mitsubishi L200, 2015- (for pickups with a double cab).
Platform dimensions: 1200 mm x 1300 mm.
Includes B045: platform B004 and BA024 mounts.
The roof rack is a three-dimensional steel structure, powder painted in black and coated on the outside with Cracked Desert structural paint, which has a similar effect to Raptor.
Holes are provided on the sides of the boot platform for attaching LED work lights and LED panels to the front of the boot (lighting not included) or other light sources.
The platform is flat at the top and is suitable for installing tarpaulins on the roof. There are holes on the top surface for easy mounting of luggage nets and for screwing any individual fasteners.
The trunk is secured with the included mounting brackets.

Stock: 0 pcs.

Jumta bagāžnieks Toyota Land Cruiser

Roof rack, basket, BK004R.
Designed for Toyota Land Cruiser J150, with roof rails, 2009-.
Included: BK001 platform with BA010 mount.
Platform dimensions: 1200 mm x 1950 mm.
It is a 2mm thick three-dimensional steel structure, powder painted black and coated on the outside with Cracked Desert structural paint, which gives an effect similar to Raptor.
Holes are provided on the sides of the boot platform for attaching LED work lights and LED panels to the front of the boot (lighting not included) or other light sources.
The upper surface of the trunk has holes for easy attachment of the luggage nets, and the rails of the trunk base have holes for screwing in any individual fasteners.
The roof rack is attached to the original vehicle rails using the included mounting brackets.

Stock: 0 pcs.

Bagāžnieka stiprinājumi

Trunk mount, code DromaderC15-kit.
The mount's grips are properly profiled, made from thick steel and equipped with rubber elements to protect the vehicle's paintwork.
Includes: 4 pcs.

Stock: > 1 pcs.

Bagāžnieka stiprinājumi

Trunk mount, code DromaderD1-kit.
The mount's grips are properly profiled, made from thick steel and equipped with rubber elements to protect the vehicle's paintwork.
Includes: 4 pcs.

Stock: 0 pcs.

Bagāžnieka šķērsstieņi

Roof racks.
- length 165 cm width 3 x 2 cm.
- black metal in a plastic shell.
- a set of two pieces.

Stock: > 1 pcs.

Jumta bagāžnieks

Roof rack designed for NISSAN NAVARA D23 / NP300. It is a spatial steel structure painted black and finished on the outside of the Raptorem. On the sides of the trunk platform there are mounts for LED work lamps and mounts for LED panels in the front of the luggage compartment. The price is for the finished platform with special mounts for NISSAN NAVARA, but without the cost of lighting. The platform is flat in advance and is suitable for installing tents on the roof. On the upper plane there are holes for convenient installation of luggage racks and screwing any individual fasteners.
Platform Dimensions: 1200mm x 1300mm
B013 kit (B004 platform plus BA009 fasteners)
Powder-coated with black paint and optionally coated with Raptor for added protection against mechanical damage.

Stock: 0 pcs.

Roof racks

Stock: 0 pcs.