Care products

Ķīļsiksnas aerosols

Protect the v-belt of your car with MOTIP V-Belt spray to remedy and prevent slipping. Also suitable for other vehicles and machines. Spray with excellent adhesion to protect V-Belts and to remedy and prevent slipping. MOTIP V-Belt spray is dilatant (increases in volume and viscosity) and user-friendly and gives lasting protection. MOTIP V-Belt Spray delays the wear, conditions V-belts and is resistant to the weather.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature.
Best processing temperature: 10–25°C.
Shake the aerosol well before use.
Switch off the engine.
Apply V-Belt Spray in an even, thin layer on the threads of the V-belt and allow to take effect.
After the solvent has evaporated, the engine can be switched on.

Stock: > 1 pcs.

Vasks slēgtiem dobumiem

For application with a UBC spray gun.

Protect the hollow areas of your car body against rust with MOTIP Hollow Section Wax. Hollow Section Wax is resistant to weather and weak acids and bases and has excellent rust protection. Hollow Section Wax has good penetration properties.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The can should be at room temperature. Best processing temperature: 10–25°C.
Shake the can before use. Working pressure: 2.5–4 bar.
Apply Wax generously in the hollow areas.
After use, clean the spray gun with white spirit.

Stock: > 1 pcs.

Vasks slēgtiem dobumiem

Protect hollow spaces in the bodywork of your car against rust with MOTIP Hollow Section Wax. Hollow section wax is resistant to the weather and weak acids and bases and has an excellent rust prevention. Hollow section wax has good penetrating properties.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The aerosol should be at room temperature. Best processing temperature: 10–25°C.
Shake the aerosol well for 2 minutes before use.
Apply Wax generously in the hollow areas using the adapter.
After use, clean the valve — turn the aerosol upside down and press the nozzle for approximately 5 seconds.

Stock: > 1 pcs.

Vaska pārklājums caurspīdīgi brūns

For application with UBC spray gun.

Prevent rust on your car with MOTIP anti-corrosion wax coating. The wax coating is resistant to weather, salt, water and weak acids and bases, has excellent rust protection and can be applied in thick layers.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The can should be at room temperature. Best processing temperature: 10–25°C. Shake the can before use. Working pressure: 4–5 bar.
Apply Wax Coating in the desired layer thickness.
After use, clean the spray gun with white spirit.

Stock: > 1 pcs.

Vaska pārklājums melns

Prevent rust on your car with MOTIP Anti-Rust Waxcoating. Waxcoating is resistant to the weather, salt, water and weak acids and bases, has an excellent rust prevention and can be applied in thick layers.

To be applied with an UBC Spray-gun.
Excellent corrosion prevention.
Excellent adhesion.
Resistant to weather influences.
Resistant to salt, water and weak acids and bases.
Can be applied in thick layers.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
The can should be at room temperature. Best processing temperature: 10–25°C. Shake the can before use. Working pressure: 4–5 bar.
Apply Wax Coating in the desired layer thickness.
After use, clean the spray gun with white spirit.

Stock: > 1 pcs.

Akmens šķembu aerosols

To be applied with an UBC Spray-gun.

Protect the bottom and visible bodywork parts of your car against chips with MOTIP Stone Chip Spray. Stone Chip Spray can be resprayed with all paints and has an excellent rust prevention. Stone Chip Spray is resistant to the weather and weak acids and bases, is sound absorbing and remains flexible.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
Remove loose old lacquer and rust, and sand the surface.
The surface should be clean, dry, and free of grease. The can should be at room temperature.
Best processing temperature: 15–25°C.
Shake the can before use. Working pressure: 2–4 bar.
Apply Stone Chip Spray in the desired layer thickness. After drying, without sanding, it can be re-sprayed with all lacquer systems.
After use, clean the spray gun with white spirit.
Drying time depends on the ambient temperature, air humidity, and the thickness of the applied lacquer layer.

Stock: > 1 pcs.

Akmens šķembu aerosols

To be applied with an UBC Spray-gun.

Protect the bottom and visible bodywork parts of your car against chips with MOTIP Stone Chip Spray. Stone Chip Spray can be resprayed with all paints and has an excellent rust prevention. Stone Chip Spray is resistant to the weather and weak acids and bases, is sound absorbing and remains flexible.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
Remove loose old lacquer and rust, and sand the surface.
The surface should be clean, dry, and free of grease. The can should be at room temperature.
Best processing temperature: 15–25°C.
Shake the can before use. Working pressure: 2–4 bar.
Apply Stone Chip Spray in the desired layer thickness. After drying, without sanding, it can be re-sprayed with all lacquer systems.
After use, clean the spray gun with white spirit.
Drying time depends on the ambient temperature, air humidity, and the thickness of the applied lacquer layer.

Stock: > 1 pcs.

Akmens šķembu aerosols pelēks

Protect the bottom and visible bodywork parts of your car against chips with MOTIP Stone Chip Spray. Stone Chip Spray can be resprayed with all paints and has an excellent rust prevention. Stone Chip Spray is resistant to the weather and weak acids and bases, is sound absorbing and remains flexible.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
Remove loose old lacquer and rust, and sand the surface.
The surface must be clean, dry, and free of grease. The aerosol should be at room temperature.
Best processing temperature: 15–25°C.
Shake the aerosol well for 2 minutes before use and spray a test sample.
Distance to the surface to be treated: approximately 25–30 cm.
Apply Stone Chip Spray in several thin layers. After drying, without sanding, it can be re-sprayed with all lacquer systems.
After use, clean the valve — turn the aerosol upside down and press the nozzle for about 5 seconds.
Drying time depends on the ambient temperature, air humidity, and the thickness of the applied lacquer layer.

Stock: > 1 pcs.

Akmens šķembu aerosols balts

Protect the bottom and visible bodywork parts of your car against chips with MOTIP Stone Chip Spray. Stone Chip Spray can be resprayed with all paints and has an excellent rust prevention. Stone Chip Spray is resistant to the weather and weak acids and bases, is sound absorbing and remains flexible
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
Remove loose old lacquer and rust, and sand the surface.
The surface must be clean, dry, and free of grease. The aerosol should be at room temperature.
Best processing temperature: 15–25°C.
Shake the aerosol well for 2 minutes before use and spray a test sample.
Distance to the surface to be treated: approximately 25–30 cm.
Apply Stone Chip Spray in several thin layers. After drying, without sanding, it can be re-sprayed with all lacquer systems.
After use, clean the valve — turn the aerosol upside down and press the nozzle for about 5 seconds.
Drying time depends on the ambient temperature, air humidity, and the thickness of the applied lacquer layer.

Stock: > 1 pcs.

Akmens šķembu aerosols melns

Protect the bottom and visible bodywork parts of your car against chips with MOTIP Stone Chip Spray. Stone Chip Spray can be resprayed with all paints and has an excellent rust prevention. Stone Chip Spray is resistant to the weather and weak acids and bases, is sound absorbing and remains flexible.
Usage Instructions
Before use, carefully read the directions on the packaging and follow them.
Remove loose old lacquer and rust, and sand the surface.
The surface must be clean, dry, and free of grease. The aerosol should be at room temperature.
Best processing temperature: 15–25°C.
Shake the aerosol well for 2 minutes before use and spray a test sample.
Distance to the surface to be treated: approximately 25–30 cm.
Apply Stone Chip Spray in several layers. After drying (without sanding), it can be re-sprayed with all lacquer systems.
After use, clean the valve — turn the aerosol upside down and press the nozzle for about 5 seconds.
Drying time depends on ambient temperature, air humidity, and the thickness of the applied lacquer layer.

Stock: > 1 pcs.

Microfiber cloths

Stock: > 1 pcs.

Universal window brush

Stock: > 1 pcs.

Stikla tīrīšanas līdzeklis

Glass cleaner TITANIUM, 750 ml
Glass cleaner TITANIUM quickly and thoroughly cleans without leaving streaks. Contains an active formula that removes greasy dirt, road dust, etc., provides long-lasting shine and UV protection.

Stock: > 1 pcs.

Mikrošķiedras dvielis

MICROFIBER TOWEL 90X60CM 500G/M2
Super absorbent and quick-drying microfiber towel. This extremely versatile and useful gadget will be perfect for many everyday situations. Thanks to our absorbent towel, you can wipe up spilled liquid in no time, wipe the car after washing, and as a last resort, even dry yourself after bathing. It is an indispensable item in every home and car or for people who often travel and do sports. The materials used are safe for the human body and the cleaned materials (wood or car paint), and the appropriate thickness ensures high absorbency and a long service life.
See for yourself how much easier cleaning and washing up will become!
Product Features:
A super-absorbent microfiber towel that is able to absorb several times more water than it weighs itself.
A properly selected mixture of two polymers in the proportions of 80/20 (Polyester / Polyamide) makes the fabric, thanks to its structure, able to absorb much more water than traditional cloths and towels.
It is definitely more pleasant to the touch and lighter than traditional towels, while taking up several times less space than a traditional towel. It is compact and very convenient to transport, easy to roll up.
Specially finished edges (trimming) prevent the towel from fraying.
The towel can be air-dried or tumble-dryed.
The product is suitable for hand and machine washing.
It is perfect for the gym, aerobics or swimming pool, super helpful when cleaning the house or when wiping the car after washing.
Specification:
Material: 80% polyester and 20% polyamide
Weight: approx. 500 g/m2
Dimensions: 60 cm x 90 cm
Color: gray-yellow

Stock: > 1 pcs.

Pulieris visa veida metāliem

Turtle Wax Metal Polish - 300ml

Product Details
Brand: Turtle Wax
Item model number: TW52853
Brand: Turtle Wax
Item form: Liquid
Specific uses for product: Polishing metal finishes on cars and motorbikes
Recommended uses for product: Polishing and protecting various metal surfaces on cars
Unit count: 300 ml
Mild abrasive cleaners and polishing agents work to remove rust, Carbon deposits and oxidation
Active corrosion inhibitors leave a protective barrier behind to keep surfaces cleaner for longer
Restores shine and lustre to chrome and metal surfaces such as Tail pipes, rims, Trims and roof racks

Turtle Wax Metal All Metal Polish 300ml is a 3-in-1 active restoration product for all metal surfaces. This formulation contains a new professional metal-polishing technology, based on precision polishing agents to produce a brilliant shine to chrome, aluminum and other soft metals. This liquid metal polish is designed to clean, protect and produce high shine to all smooth metal surfaces. Turtle Wax has developed this revolutionary, professional grade polish for the auto enthusiast who is seeking the highest reflection on wheels, chrome and aluminum trim. The formula safely removes oxidation and micro scratches to produce a unique, brilliant, showroom shine for all metal surfaces while leaving a protective coating to retard further oxidation.

Stock: > 1 pcs.

Microfiber polishing cloth

Stock: > 1 pcs.

Leather care product

Stock: > 1 pcs.

Ādas kopšanas līdzeklis

Preparation for skin care, 400 ml
Preparation for skin care contains a mixture of substances ensuring both the effective removal of surface contamination, and active maintenance of the components upholstery and motorcycle. ProTech center of the brand owes its effectiveness composition of active substances with highly moisturizing and softening the skin, and the addition of the UV filter protects upholstery from loss of color.

Stock: > 1 pcs.

Riepu spīdums

Tire Shine Restorer - CarPlan Ultra Tyre Shine, 500 ml.
Restores the shine of 'wet-look' tires while protecting them from general wear.

Stock: > 1 pcs.

Mikrošķiedras lupatiņu komplekts

Microfiber cloth set.
Microfiber cloth set.
- 12 pcs/set.
- Effectively collect dust, dirt and stains without the use of aggressive chemicals.
- Reusable - durable materials allow you to wash and use the cloths many times without losing their cleaning properties.
- Suitable for use in cars: interior care, cleaning dashboards, screens, windows and upholstery, in everyday life: for cleaning furniture, household appliances, windows, mirrors and other surfaces, for electronics: gentle cleaning of computer screens, smartphones and other electronic devices, removes fingerprints and dust without scratching them.
- The size of each cloth is 22.5 x 22.5 cm, which makes them ideal for cleaning small surfaces and hard-to-reach places.
- Packed in a box.

Stock: > 1 pcs.